Pinpoint of 200-310 practice test materials and secret for Cisco certification for IT examinee, Real Success Guaranteed with Updated 200-310 pdf dumps vce Materials. 100% PASS Designing for Cisco Internetwork Solutions exam Today!


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 200-310 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 200-310 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/200-310-exam-dumps.html

2021 Apr 200-310 simulations

Q111. Where in the Cisco Enterprise Architecture model does network management reside? 

A. Enterprise data center module 

B. Enterprise campus module 

C. Enterprise edge module 

D. Service Provider edge module 

E. Service Provider data center module 

Answer: B 

Explanation: 

The network management servers reside in the campus infrastructure but have tie-ins to all the components in the enterprise network for monitoring and management. 


Q112. Which three are features of LWAPP? (Choose three.) 

A. firmware synchronization 

B. local management of APs 

C. configuration changes manually synced 

D. encryption of control channel 

E. configuration data only on the WLC 

F. wireless control free operation 

G. replaces 802.1x for authentication in wireless connections 

Answer: A,D,E 


Q113. Which three pieces of information should be documented for each step in a design implementation plan? (Choose three.) 

A. step description 

B. design document references 

C. easy guidelines in case of failure 

D. estimated implementation time 

E. simple implementation guidelines 

F. estimated rollback time in case of failure 

Answer: A,B,D 


Q114. An organization is deciding what routing protocol to use throughout their network. What must be considered if routing is to be performed at the access layer? 

A. reduced scalability of the network when introducing a large number of switch blocks into the routing table 

B. centralized management of access control lists at the distribution layer 

C. reliability when implementing routing over spanning-tree at the access layer 

D. performance differences between core, distribution and access layer equipment 

Answer: D 


Q115. What is the acceptable amount of one-way network delay for voice and video applications? 

A. 300 bytes 

B. 1 sec C. 150 ms 

D. 500 ms 

Answer: C 

Explanation: 

Delay Components in VoIP Networks The ITU's G.I 14 recommendation specifics that the one-way delay between endpoints should not exceed 150 ms to be acceptable, commercial voice quality. In private networks, somewhat longer delays might be acceptable for economic reasons. The ITU G.114 recommendation specifics that 151-ms to 400-ms one-way delay might be acceptable provided that organizations are aware that the transmission time will affect the quality of user applications. One-way delays of above 400 ms are unacceptable for general network planning purposes. 


Up to date 200-310 vce:

Q116. Which two statements about designing the Data Center Access layer are correct? (Choose two.) 

A. Multiport NIC servers should each have their own IP address. 

B. Layer 3 connectivity should never be used in the access layer. 

C. Layer 2 connectivity is primarily implemented in the access layer. 

D. Multiport NIC servers should never be used in the access layer. 

E. Layer 2 clustering implementation requires servers to be Layer 2 adjacent. 

Answer: C,E 

Explanation: 

User access is primarily layer 2 in nature, layer 2 clustering is possible only in layer 2 Here is the Explanation: from the Cisco press CCDA certification guide Figure 4-8. Enterprise Data Center Infrastructure Overview 

Defining the DC Access Layer 

The data center access layer’s main purpose is to provide Layer 2 and Layer 3 physical port density for various servers in the data center. In addition, data center access layer switches provide high-performance, low-latency switching and can support a mix of oversubscription requirements. Both Layer 2 and Layer 3 access (also called routed access) designs are available, but most data center access layers are built using Layer 2 connectivity. The Layer 2 access design uses VLAN trunks upstream, which allows data center aggregation services to be shared across the same VLAN and across multiple switches. Other advantages of Layer 2 access are support for NIC teaming and server clustering that requires network connections to be Layer 2 adjacent or on the same VLAN with one another. 

CCDA 640-864 Official Certification Guide Fourth Edition, Chapter 4 


Q117. Which two design approaches provide management of enterprise network devices? (Choose two.) 

A. in-band 

B. out-of-line 

C. out-of-band 

D. in-line 

Answer: A,C 


Q118. Which Cisco Wireless LAN Controller interface is used for out-of-band management? 

A. service port 

B. management port 

C. controller port 

D. virtual port 

Answer: A 


Q119. A network engineer is following the Cisco enterprise architecture model. To which network layer would a branch office connect to using a private WAN? 

A. Enterprise Campus 

B. Enterprise Edge 

C. SP Edge Premise 

D. Remote Module 

Answer: D 


Q120. Which WAN technology is a cost-effective method to deliver 100Mb of bandwidth to multiple branch offices? 

A. DSL 

B. DWDM 

C. ISDN 

D. Metro Ethernet 

Answer: D