It is impossible to pass VMware 2V0-622 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed . You will get a surprising result by our .

Online VMware 2V0-622 free dumps demo Below:

NEW QUESTION 1
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:
vSphere Distributed Switch MTU supported status
The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?

  • A. Configure the Distributed Switch to MTU 9100.
  • B. Disconnect and reconnect the physical network cable.
  • C. Configure the physical switch to MTU 1600.
  • D. Disable the Distributed Switch MTU.

Answer: C

NEW QUESTION 2
After upgrading the vSphere infrastructure and VMware Tools to version 6.5, the “Upgrade VM Compatibility” option is grayed out in the vSphere Web Client. (See Exhibit.)
2V0-622 dumps exhibit
What must the administrator do to enable the VM compatibility upgrade?

  • A. VMware Tools should be upgraded last.
  • B. Restart the ESXi server.
  • C. Uninstall VMware Tools.
  • D. Power off the virtual machine.

Answer: D

NEW QUESTION 3
Which two statements are true foe NFS v4.1 firewall behavior? (Choose two.)

  • A. It closes port 2049.
  • B. It opens port 2049.
  • C. It sets allowedAll flag to TRUE.
  • D. It sets allowedAll flag to FALSE.

Answer: BC

Explanation: NFS v4.1 Firewall Behavior
When you mount the first NFS v4.1 datastore, ESXI enables the nfs41client rule set and sets its allowedAll flag to TRUE. This action opens port 2049 for all IP address. Unmounting an NFS v4.1 datastore does not affect the firewall state. That is, the first NFS v4.1 mount opens port 2049 and that port remains enabled unless you close it explicitly.
2V0-622 dumps exhibit

NEW QUESTION 4
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)' (Choose two.)

  • A. The password for the user account cannot contain spaces.
  • B. The user account should be created in the Single Sign-On domain.
  • C. The user account must be assigned with Administrator role.
  • D. The user account cannot inherit required permissions from a group role.

Answer: AC

Explanation: For the vCenter server account used for vSphere data protection, the user account must have administrator
role and the password for the user account should not contain spaces. https://docs.vmware.com/en/VMware-vSphere/6.5/vmware-data-protection-administration-guide-61.pdf

NEW QUESTION 5
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)

  • A. Use RDM in virtual mode for virtual disk.
  • B. Use virtual disks in Independent – Persistent mode.
  • C. Use a virtual disk larger than 2 TB in size.
  • D. Use RDM in physical mode for virtual disk.

Answer: BD

NEW QUESTION 6
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33.
Which could be the reason for this?

  • A. The upgrade has changed the vmhba name.
  • B. vSphere 6.5 automates iSCSI configurations.
  • C. vSphere 6.5 no longer supports software iSCSI.
  • D. The upgrade has deleted the vmhba.

Answer: A

NEW QUESTION 7
A vSphere administrator wants to reserve 0.5Gbps for virtual machines on each uplink on a distributed switch that has 10 uplinks.
What is the quota that should be reserved for the network resource pool?

  • A. 5Gbps
  • B. 10Gbps
  • C. 100Gbps
  • D. 0.5Gbps

Answer: A

Explanation: For example, if the virtual machine system traffic has 0.5 Gbps reserved on each 10 GbE uplink on a distributed switch that has 10 uplinks, then the total aggregated bandwidth available for VM reservation on this switch is 5 Gbps. Each network resource pool can reserve a quota of this 5 Gbps capacity.

NEW QUESTION 8
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?

  • A. Non
  • B. Backup Verification job is not a feature of vSphere Data Protection
  • C. It is a manual task- Power it on- Verify the guest OS- Check started applications
  • D. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OS is booted by communicating with the Backup Verification agent
  • E. It is an automatic process- Restore a virtual machine- Power it on- Verify that the guest OC is booted by detecting the VMware ToolsTM “heartbeats”

Answer: D

Explanation: Automated Backup Verification
Backup Verification jobs can be created in vSphere Data Protection. These jobs automate the process of restoring a virtual machine: powering it on; verifying the guest OS booted, by detection of VMware Tools “heartbeats”.

NEW QUESTION 9
Which is required for configuring iSCSI Software Adapter network port binding?

  • A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
  • B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
  • C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
  • D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.

Answer: D

NEW QUESTION 10
An administrator is investigating virtual machine performance issues using ESXTOP. The ESXi host does not have hyperthreading enabled.
Which statistics would be relevant for troubleshooting VM performance issues?

  • A. %RDY
  • B. %IDLE
  • C. %RUN
  • D. CORE UTIL(%)

Answer: A

NEW QUESTION 11
Which is the minimum vSphere Distributed Switch version needed to support Network Health Check?

  • A. 6.5
  • B. 5.1
  • C. 4.1
  • D. 5.5

Answer: B

NEW QUESTION 12
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit).
2V0-622 dumps exhibit
Which two statements can describe the cause of this activity? (Choose two.)

  • A. The network packet size is too large.
  • B. Disk latency is present on the datastore.
  • C. VMware Tools is not installed.
  • D. The network packet size is too small.

Answer: BD

Explanation: Network packet size is too small, which increases the demand for the CPU resources needed for processing each
packet.https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.monitoring.doc/GUID-C4EA86
Found this re disk latency:https://communities.vmware.com/thread/557063
The below also discusses Disk Performance issues and mentioned CPU usage:https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.monitoring.doc/GUID-E813116

NEW QUESTION 13
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)

  • A. vCenter Inventory Services
  • B. vSphere Authentication Proxy
  • C. vSphere Web Client
  • D. vSphere ESXi Dump Collector
  • E. vSphere Syslog Collector

Answer: CDE

NEW QUESTION 14
What new feature was introduced to the Content Library in vSphere 6.5?

  • A. Mount an ISO directly from the Content Library.
  • B. Deploy a virtual machine from an OVF Package in a Content Library.
  • C. Upload a File from a URL to a Library Item.
  • D. Upload a File from a Local System to a Library Item.

Answer: A

Explanation: Content Libraries in vSphere 6.5, which has additional features including the option to mount an ISO from a Content Library, update existing templates, and apply guest OS Customisation Specifications during VM deployments.
https://esxsi.com/2021/12/30/content-libraries/

NEW QUESTION 15
What is a potential downside of having more than four storage paths per datastore?

  • A. increases storage latency for VM
  • B. limits the number of LUNs per host
  • C. limits the storage protocols
  • D. limits the path selection policies

Answer: B

NEW QUESTION 16
What is the logical and physical sector size for 512e disks?

  • A. Logical Sector Size 512 Physical Sector Size 512
  • B. Logical Sector Size 512 Physical Sector Size 4096
  • C. Logical Sector Size 4096 Physical Sector Size 4096
  • D. Logical Sector Size 2048 Physical Sector Size 512

Answer: B

NEW QUESTION 17
A VM folder contains VM1 and VM2.
• Group A has permission to power on virtual machines, defined on the VM folder and its children.
• Group B has permission to power off virtual machines, defined on the VM folder and its children.
If a user is a member of Groups A and B, what will be the user's effective permission on VM1 and VM2?

  • A. Power on.
  • B. Power off.
  • C. Power on and Power off.
  • D. Reset.

Answer: C

100% Valid and Newest Version 2V0-622 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/2V0-622-exam-dumps.html (New 276 Q&As)