Your success in Cisco cisco 300 075 is our sole target and we develop all our cisco 300 075 braindumps in a way that facilitates the attainment of this target. Not only is our 300 075 pdf study material the best you can find, it is also the most detailed and the most updated. 300 075 ciptv2 Practice Exams for Cisco CCNP Collaboration 300 075 dump are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-075-exam-dumps.html
Q1. How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations?
A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager.
B. RSVP enables AAR within Cisco Unified Communications Manager.
C. RSVP is topology aware.
D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR.
Answer: C
Q2. What is the difference between an H.323 gateway and a SIP gateway?
A. An H.323 gateway requires that dial peers be configured before PSTN calls can be placed and received. The SIP gateway requires no dial peers.
B. The H.323 gateway can be added in Cisco Unified Communications Manager under gateway type as H.323 Gateway. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An H.323 gateway does not require a call agent for PSTN calls to be placed and received.
D. An H.323 gateway can register with Cisco Unified Communications Manager. A SIP gateway will show status of "Unknown".
E. The H.323 gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The SIP gateway must be configured in Cisco Unified Communications Manager using the domain name.
Answer: B
Q3. On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend?
A. enterprise parameters
B. media resources
C. physical location
D. region
E. location
Answer: D
Q4. Refer to the exhibit.
Which option describes the effect of this configuration?
A. It implements Cisco United CME redundancy.
B. It creates dial peers.
C. It configures failover.
D. It configures a standby Cisco United CME.
E. It implements HSRP.
F. It implements Cisco IOS redundancy.
Answer: A
Q5. Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco IP Telephony Authentication and Encryption Fundamentals)
A. CAPF enrollment supports the use of authentication strings.
B. The CAPF itself has to enroll with the Cisco CTL client.
C. LSCs are issued by the Cisco CTL client or by the CAPF.
D. MICs are issued by the CAPF itself or by an external CA.
Answer: A
Explanation:
Incorrect Answer: B, C, D
The CAPF enrollment process is as follows:
1. The IP phone generates its public and private key pairs.
2. The IP phone downloads the certicate of the CAPF and uses it to establish a TLS session with the CAPF.
3. The IP phone enrolls with the CAPF, sending its identity, its public key, and an optional authentication string.
4. The CAPF issues a certicate for the IP phone signed with its private key.
5. The CAPF sends the signed certicate to the IP phone.
Link: http://my.safaribooksonline.com/book/certification/cipt/9781587052613/understanding-cisco-ip-telephony-authentication-and-encryption-fundamentals/584.
Q6. Assume that the Cisco IOS SAF Forwarder is configured correctly. Which minimum configurations on Cisco Unified Communications Manager are needed for the SAF registration to take place?
A. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Advertising Service
B. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Requesting Service
C. SAF Trunk, SAF Security Profile, SAF Forwarder, CCD Requesting Service, and CCD Advertising Service
D. SAF Trunk, SAF Security Profile, and SAF Forwarder
E. SAF Trunk, CCD Requesting Service, and CCD Advertising Service
Answer: B
Q7. If your IP telephony administrator asks you to configure a local zone for your dial plan to control the volume of calls between two end points in a centralized multisite environment, which two types of Call Admission Control can be implemented? (Choose two.)
A. locations based
B. automated alternate routing
C. gatekeeper based
D. SRST
E. Cisco Unified Communications Manager based
Answer: A,B
Explanation:
Incorrect Answer: C, D, E Location-based call admission control (CAC) manages WAN link bandwidth in Cisco Unified Communications Manager. Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1067747
Q8. Refer to the exhibit:
The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager.
Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder?
A. router eigrp SAFiservice-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-familyvoice service safprofile trunkroute 1session protocol sip interface Loopback1 transport tcp port 5060!
B. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit- service-family!voice service safprofile trunk-route 1session protocol sip interface Loopback1 transport tcp port 5060!profile dn-block 1 alias-prefix 1972555pattern 1 type extension 4xxx!profile callcontrol 1dn-servicetrunk-route 1dn-block 1dn-block 2!channel 1 vrouter SAF asystem 1subscribe callcontrol wildcardedpublish callcontrol 1!
C. router eigrp SAF!service-family ipv4 autonomous-system 1!topology baseexit-sf-topologyexit-service-family!
D. None of above configurations contain sufficient information.
Answer: C
Explanation:
Incorrect Answer: A, B, D only following configuration is enough router eigrp SAF service-family ipv4 autonomous-system 1 exit-service-family link:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps10822/whitepaper_c11-636604.html
Q9. Refer to the exhibit.
Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site?
A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number.
B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number.
C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number.
Answer: C
Q10. Refer to the exhibit.
You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?
A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.
C. The sccp ccm group number needs to match the associate ccm 2 command.
D. The maximum sessions command must match the number of codecs configured under the dsp farm profile.
E. The sccp ccm group number must match the voice-card number.
Answer: B
Explanation:
Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtr ns.html