Act now and download your Cisco ccnp 300 101 test today! Do not waste time for the worthless Cisco 300 101 pdf tutorials. Download Most recent Cisco ROUTE Implementing Cisco IP Routing exam with real questions and answers and begin to learn Cisco ccnp 300 101 dumps with a classic professional.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-101-exam-dumps.html
P.S. Free 300-101 braindump are available on Google Drive, GET MORE: https://drive.google.com/open?id=1VVsMJd1T1ylej0aePOIREXo7V31c7pn0
New Cisco 300-101 Exam Dumps Collection (Question 9 - Question 18)
Question No: 9
Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?
A. Rl(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out
Answer: C
Question No: 10
Which two methods use IPsec to provide secure connectivity from the branch office to the headquarters office? (Choose two.)
A. DMVPN
B. MPLS VPN
C. Virtual Tunnel Interface (VTI)
D. SSL VPN
E. PPPoE
Answer: A,C
Question No: 11
Which set of actions does a network engineer perform to set the IPv6 address of a DHCP relay server at the VLAN interface level?
A. Enter the VLAN interface configuration mode and define the IPv6 address of a DHCP relay server
B. Enter the global configuration mode and enable the IPv6 DHCP relay
C. Enter the global configuration mode, enable IPv6 DHCP relay from interface configuration mode and define the IPv6 address of a DHCP relay server
D. Enter the VLAN interface configuration mode, enable IPv6 DHCP relay, and define the IPv6 address of a DHCP relay server
Answer: D
Explanation: You can accept DHCP requests from clients on the associated context or VLAN interface and enable the DHCP relay agent by using the ipv6 dhcp relay enable command (for IPv6) or the ip dhcp relay enable command (for IPv4). The DHCP relay starts forwarding packets to the DHCP server address specified in the ipv6 dhcp relay server command or the ip dhcp relay server command for the associated context or VLAN interface.
Question No: 12
What does the following access list, which is applied on the external interface FastEthernet 1/0 of the perimeter router, accomplish?
router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log router (config)#access-list 101 permit ip any any
router (config)#interface fastEthernet 1/0 router (config-if)#ip access-group 101 in
A. It prevents incoming traffic from IP address ranges 10.0.0.0-10.0.0.255, 172.16.0.0- 172.31.255.255, 192.168.0.0-192.168.255.255 and logs any intrusion attempts.
B. It prevents the internal network from being used in spoofed denial of service attacks and logs any exit to the Internet.
C. It filters incoming traffic from private addresses in order to prevent spoofing and logs any intrusion attempts.
D. It prevents private internal addresses to be accessed directly from outside.
Answer: C
Question No: 13
Refer to the exhibit.
A new TAC engineer came to you for advice. A GRE over IPsec tunnel was configured, but the tunnel is not coming up.
What did the TAC engineer configure incorrectly?
A. The crypto isakmp configuration is not correct.
B. The crypto map configuration is not correct.
C. The interface tunnel configuration is not correct.
D. The network configuration is not correct; network 172.16.1.0 is missing.
Answer: A
Question No: 14
CORRECT TEXTYou are a network engineer with ROUTE.com, a small IT company. ROUTE.com has two connections to the Internet; one via a frame relay link and one via an EoMPLS link. IT policy requires that all outbound HTTP traffic use the frame relay link when it is available. All other traffic may use either link. No static or default routing is allowed.
Choose and configure the appropriate path selection feature to accomplish this task. You may use the Test Workstation to generate HTTP traffic to validate your solution.
Answer:
We need to configure policy based routing to send specific traffic along a path that is different from the best path in the routing table.
Here are the step by Step Solution for this:
1) First create the access list that catches the HTTP traffic: R1(config)#access-list 101 permit tcp any any eq www
2) Configure the route map that sets the next hop address to be ISP1 and permits the rest of the traffic:
R1(config)#route-map pbr permit 10 R1(config-route-map)#match ip address 101
R1(config-route-map)#set ip next-hop 10.1.100.2 R1(config-route-map)#exit
R1(config)#route-map pbr permit 20
3) Apply the route-map on the interface to the server in the EIGRP Network: R1(config-route-map)#exit
R1(config)#int fa0/1
R1(config-if)#ip policy route-map pbr R1(config-if)#exit
R1(config)#exit
Explanation:
First you need to configure access list to HTTP traffic and then configure that access list. After that configure the route map and then apply it on the interface to the server in EIGRP network.
Question No: 15
Refer to Exhibit:
Which statement about the configuration on the Cisco router is true?
A. The router sends only NTP traffic, using the loopback interface, and it disables eth0/0 from sending NTP traffic.
B. Eth0/0 sends NTP traffic on behalf of the loopback interface
C. The router sends only NTP traffic, using the eth0/0 interface, and it disables loopback0 from sending NTP traffic.
D. The router never sends NTP traffic, as using the loopback interface for NTP traffic is not supported on IOS routers.
Answer: C
Question No: 16
Which value does a Cisco router use as its default username for CHAP authentication?
A. ppp
B. Cisco
C. its own hostname
D. chap
Answer: C
Explanation: https://www.cisco.com/c/en/us/support/docs/wan/point-to-point-protocol-ppp/25647-understanding-ppp-chap.html
Question No: 17
Refer to the exhibit.
Which statement about the output of the show flow-sampler command is true?
A. The sampler matched 10 packets, each packet randomly chosen from every group of 100 packets.
B. The sampler matched 10 packets, one packet every 100 packets.
C. The sampler matched 10 packets, each one randomly chosen from every 100-second interval.
D. The sampler matched 10 packets, one packet every 100 seconds.
Answer: A
Question No: 18
Which type of traffic does DHCP snooping drop?
A. discover messages
B. DHCP messages where the source MAC and client MAC do not match
C. traffic from a trusted DHCP server to client
D. DHCP messages where the destination MAC and client MAC do not match
Answer: B
100% Most recent Cisco 300-101 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/300-101-dumps.html (New 436 Q&As)