Practical of 300 101 dumps latest exam materials and bible for Cisco certification for examinee, Real Success Guaranteed with Updated 9tut ccnp 300 101 pdf dumps vce Materials. 100% PASS ROUTE Implementing Cisco IP Routing exam Today!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-101-exam-dumps.html
P.S. Practical 300-101 bible are available on Google Drive, GET MORE: https://drive.google.com/open?id=1BHb398qwKUUDgc3Vdghj3SxO9n6grhvU
New Cisco 300-101 Exam Dumps Collection (Question 2 - Question 11)
New Questions 2
What is IPv6 router solicitation?
A. a request made by a node to join a specified multicast group
B. a request made by a node for its IP address
C. a request made by a node for the IP address of the DHCP server
D. a request made by a node for the IP address of the local router
Answer: D
New Questions 3
Given the network diagram.
Which address would successfully summarize only the networks seen?
A. 192.168.0.0/24
B. 192.168.8.0/20
C. 192.168.8.0/21
D. 192.168.12.0/20
E. 192.168.16.0/21
F. These networks cannot be summarized.
Answer: C
Explanation:
let's suppose it is a /20 then we would have addresses from 192.168.0.1 to 192.168.15.255 Now let's suppose it is a /21 then we would have addresses from 192.168.8.1 to 192.168.15.255
So both summaries encompass the networks we want to summarize but the second one is the most restrictive one as it only encompasses the networks we were asked to summarize and not others so it is the correct summary.
In fact just count the number of subnets which is 8 and find the exponent of 2 which is 8, that gives you 3 and to find out the summary mask just do /24 - 3 = /21.
if you make it in binary you'll find out the answer too: the interesting octet is 3rd one so let's convert in binary. 8 0000 1000
9 0000 1001
10 0000 1010
11 0000 1011
12 0000 1100
13 0000 1101
14 0000 1110
15 0000 1111
I've bolded the bits in common there are 5 so 16+5=21 which is mask and address is 192.168.8.0
New Questions 4
A network engineer is asked to create an SNMP-enabled proactive monitoring solution to ensure that jitter levels remain between particular boundaries. Which IP SLA option should the engineer usa?
A. threshold
B. frequency
C. verify-data
D. timeout
Answer: A
New Questions 5
A router was configured with the eigrp stub command. The router advertises which types of routes?
A. connected, static, and summary
B. static and summary
C. connected and static
D. connected and summary
Answer: D
New Questions 6
Refer to the exhibit.
Which option prevents routing updates from being sent to the DHCP router, while still allowing routing update messages to flow to the Internet router and the distribution switches?
A. DHCP(config-router)# passive-interface default DHCP(config-router)# no passive- interface Gi1/0 Internet(config-router)# passive-interface Gi0/1 Internet (config-router)# passive-interface Gi0/2
B. Core(config-router)# passive-interface Gi0/0 Core(config-router)# passive-interface Gi3/1 Core(config-router)# passive-interface Gi3/2 DHCP(config-router)# no passive- interface Gi1/0
C. Core(config-router)# passive-interface default Core(config-router)# no passive-interface Gi0/0 Core(config-router)# no passive-interface Gi3/1 Core(config-router)# no passive- interface Gi3/2
D. Internet(config-router)# passive-interface default Core(config-router)# passive-interface default DSW1(config-router)# passive-interface default DSW2(config-router)# passive- interface default
Answer: C
New Questions 7
When implementing a 6to4 tunnel, which IPv6 address is the correct translation of the IPv4 address 192.168.99.1?
A. c0a8:6301:2002::/48
B. 2002:c0a8:6301::/48
C. 2002:c0a8:6301::/8
D. 2002::/16
Answer: B
Explanation:
16 bits for the most significant 6to4 reserved bits (2002::/16) plus 32 bits source ipv4 address (traslated in HEX format) = 48 bits,
New Questions 8
Which three options are valid DHCPv6 functions? (Choose three.)
A. Server
B. client
C. approver
D. requester
E. requester
F. ACK
G. relay
Answer: A,B,G
New Questions 9
Which IP SLA operation requires Cisco endpoints?
A. UDP Jitter for VoIP
B. ICMP Path Echo
C. ICMP Echo
D. UDP Jitter
Answer: A
Explanation:
UDP Jitter Operation
With the addition of real-time traffic (ie: VoIP), the focus shifts not just in the reliability of the network, but also on the delays involved in transmitting the data. Real-time traffic is delay sensitive. For Voice data, packet loss is manageable to some extent, but frequent losses impair communication between endpoints. The UDP jitter operation is the most popular operation because the user can obtain packet loss, jitter and latency from one operation. This also includes unidirectional measurements as well.
The Jitter operation is designed to measure the delay, delay variance and packet loss in IP networks by generating active UDP traffic. It sends N packets, each of size S, from source router to a target router (which requires Cisco IOS IP SLAs responder enabled) each T milliseconds apart. All these parameters are user configurable.
http://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper09186a00802d5efe.html
New Questions 10
Refer to the exhibit.
Which option represents the minimal configuration that allows inbound traffic from the 172.16.1.0/24 network to successfully enter router R, while also limiting spoofed 10.0.0.0/8 hosts that could enter router R?
A. (config)#ip cef (config)#interface fa0/0
(config-if)#ip verify unicast source reachable-via rx allow-default
B. (config)#ip cef
(config)#interface fa0/0
(config-if)#ip verify unicast source reachable-via rx
C. (config)#no ip cef (config)#interface fa0/0
(config-if)#ip verify unicast source reachable-via rx
D. (config)#interface fa0/0
(config-if)#ip verify unicast source reachable-via any
Answer: A
New Questions 11
Refer to the exhibit.
Which statement about this neighbor of R1 is true?
A. OSPFv3 adjacency has been lost, which causes the neighbor to be considered Stale.
B. Aggregate global addresses are always used between IPv6 neighbors.
C. OSPFv3 adjacency will not work between link-local addresses.
D. R1 used ICMP to learn about this neighbor.
Answer: D
Explanation:
ICMP is a ping echo. IPv6 uses ICMP to learn about its neighbor.
Recommend!! Get the Practical 300-101 dumps in VCE and PDF From Certleader, Welcome to download: https://www.certleader.com/300-101-dumps.html (New 487 Q&As Version)