Actualtests has the Cisco Cisco exam questions which usually with correct and verified answers. They will appear within the real Cisco 300-320 exam. So taking complete advantage of each of our Cisco 300-320 practice questions and answers, you should be successful from first attempt. Your Cisco 300-320 training study course is a wonderful instrument to prepare the 300-320 exam. Many of us provide a limited occasion for the free downloadable Cisco 300-320 exam dumps after paying. There is certainly no time to reduce! Our Cisco 300-320 exam items are offered at a discounted price. Look absolutely no further a lot more. Stop from Actualtests website along with buy the actual Cisco Cisco exam dumps right currently. You will always be capable of producing great improvement during the review from the Cisco 300-320 exam.
2021 Nov 320-355-300:
Q81. Source traffic is sent to a VIP on an SLB device, which in turn is routed to the destination server. Return traffic is policy-based routed back to the SLB.
Which SLB design has been implemented?
A. router mode
B. inline bridge mode
C. one-armed mode
D. two-armed mode
Answer: D
Q82. Given the addresses 10.10.16.0/24 and 10.10.23.0/24, which option is the best summary?
A. 10.10.0.0/16
B. 10.10.8.0/23
C. 10.10.16.0/23
D. 10.10.16.0/21
Answer: D
Q83. Which option is a benefit of the vPC+ feature?
A. Cisco FabricPath is not required in the network domain.
B. This feature provides fault domain separation.
C. Nonfabric devices, such as a server or a classic Ethernet switch, can be connected to two fabric switches that are configured with vPC.
D. The control plane and management plane are combined into one logical plane.
Answer: C
Q84. To which network layer should Cisco Express Forwarding be tuned to support load balancing and to make more informed forwarding decisions?
A. Layer 1
B. Layer 2
C. Layer 3
D. Layer 4
E. Layer 5
F. Layer 6
G. Layer 7
Answer: D
Q85. What are two advantages of using Cisco FEX devices in the data center design? (Choose two.)
A. Traffic-forwarding decisions are made by the Cisco FEX device.
B. Cisco FEX devices must be upgraded when the parent switch is upgraded.
C. Traffic-forwarding decisions are made by the parent switch, resulting in easier troubleshooting and centralized management.
D. Cisco FEX devices do not have to be upgraded when the parent switch is upgraded, resulting in cost savings.
E. Cisco FEX devices can be part of two different VDCs.
Answer: C,D
Most up-to-date proaqua tm 300-320 cisco:
Q86. A network administrator wants to provide high availability in a data center environment by making sure that there is no reconvergence of Layer 2 and Layer 3 protocols when there is a Layer 3 switch failure..Which Cisco Nexus feature fulfills this purpose?
A. ISSU
B. VSS
C. vPC
D. MEC
Answer: C
Q87. Which option is the primary reason to implement security in a multicast network?
A. maintain network operations
B. allow multicast to continue to function
C. optimize multicast utilization
D. ensure data streams are sent to the intended receivers
Answer: A
Q88. Which of the following two statements about Cisco NSF and SSO are the most relevant to the network designer? (Choose two.)
A. You can reduce outages to 1 to 3 seconds by using SSO in a Layer 2 environment or Cisco NSF with SSO in a Layer 3 environment.
B. SSO and NSF each require the devices to either be graceful restart-capable or graceful restart-aware.
C. In a fully redundant topology adding redundant supervisors with NSF and SSO may cause longer convergence times than single supervisors with tuned IGP timers
D. The primary deployment scenario for Cisco NSF with SSO is in the Distribution and Core layers.
E. Cisco NSF-aware neighbor relationships are independent of any tuned IGP timers
Answer: A,C
Q89. What is an advantage of using the Cisco FabricPath feature in a data center environment?
A. VSS does not have to be configured.
B. Transparent Interconnection of Lots of Links can be configured simultaneously.
C. Equal-Cost Multipath can be used to choose the forwarding path.
D. The control plane and management plane remain separate.
Answer: C
Q90. OSPF stub areas are an important tool for the Network designer; which of the following two should be considered when utilizing OSPF stub areas? (Choose two)
A. OSPF stub areas increase the size of the LSDB with the addition of Type 3 and 5 LSAs
B. OSPF not so stubby areas are particularly useful as a simpler form of summarization
C. OSPF stub areas are always insulated from external changes
D. OSPF totally stubby areas cannot distinguish among ABRs for the best route to destinations outside the area
E. OSPF stub areas can distinguish among ASBRs for destinations that are external to the OSPF domain
Answer: C,D