Want to know Testking 300-370 Exam practice test features? Want to lear more about Cisco Troubleshooting Cisco Wireless Enterprise Network certification experience? Study Tested Cisco 300-370 answers to Replace 300-370 questions at Testking. Gat a success with an absolute guarantee to pass Cisco 300-370 (Troubleshooting Cisco Wireless Enterprise Network) test on your first attempt.
2021 Nov 300-370 download
Q11. A wireless engineer is unable to join lightweight access points to the Cisco Wireless Controller. The access points receive ip addresses from a DHCP pool configured on the core switch. Which action must be taken to resolve the issue?
A. Upgrade the Wireless Controller to a newer IOS release.
B. Configure option 43 on the DHCP pool.
C. Configure option 82 on the Wireless controller.
D. Change the management ip address on the Wireless Controller.
Answer: C
Q12. An engineer is troubleshooting non-802 11 interference and observes this output. Which type of interference signatures can be identified?
Refer to the exhibit.
A. one frequency hopping Bluetooth
B. two healthy CCK and one malformed OFDM
C. three broadband jammers
D. two strong microwave ovens and one moderate
Answer: B
Q13. In a cisco OfficeExtend environment, which encryption type n und between the access point and the mass LAW controller?
A. DTLS
B. TIS
C. STIS
D. OpenSSL
Answer: A
Q14. Which three steps would a network engineer use to troubleshoot an AP join problem? (Choose three.)
A. Validate the STP configuration.
B. Verify the ping AP from the controller.
C. Verify the ping AP from the client.
D. Verify that the AP is getting an address from the DHCP server.
E. I Validate the SNMP configuration.
F. Verify the authentication configuration parameters.
Answer: A,B,F
Q15. When implementing interface groups, how are the IP addresses sourced via DHCP for wireless clients?
A. through the primary interface of the group
B. through round robin between interfaces
C. through interface group definition
D. through the interface receiving the first response
Answer: B
Regenerate 300-370 exam prep:
Q16. Refer to the exhibit.
A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues appear in the output? (Choose two)
A. The AP has the incorrect RADIUS server address
B. There is a problem with the client supplicant
C. The AP has lost IP connectivity to the authentication server
D. The authentic at ion server is misconfigured on the controller
E. The EAP client timeout value should be increased
F. The authentication server is misconfigured in the WLAN
Answer: A,C
Q17. Which statement about the join process of the access point is true? Refer to the exhibit.
A. The time on the controller is outside of the certificates validity time interval, so the join phase failed.
B. The AP moved from this controller to its primary controller.
C. The controller rejected most of the discovery requests from the AP because they were not received on the management interface subnet. The AP failed to join the controller.
D. The AP successfully joined the controller.
E. The AP failed to join because the self-signed certificate of the AP on the controller was not correct.
Answer: C
Q18. A WLAN was installed at a high AP density. DTPC is lowering the transmit power of many APs too low. Which change m the DTPC transmit power threshold must be made to allow APs to globally increase AP transmit power by 3dBm?
A. from 70 dBm to 73 dBm
B. from -70 dBm to -73 dBm
C. from 70 dBm to 67 dBm
D. from -70 dBm to -67 dBm
Answer: D
Q19. A Wireless LAN Cisco engineer is troubleshooting 802. 11ac WLAN at customer site Doe to interferences with neighboring 802 11n networks the engineer must determine the current primary secondary channel allocation to enhance the current configuration. Channel 60 has been chosen by the customer as primary 20 MHz channel. Which combination determines the resulting primary 40 MHz and primary 80 MHZ channels?
A. primary 40 MHz channel 62, primary 80 MM: channel 58
B. primary 40 MHz channel 54, primary 80 MHz channel 58
C. primary 40 MHz channel 64, primary 80 MHz channel 60
D. primary 40 MHz channel 60, primary 80 MHz channel 56
Answer: A
Q20. An alarm is reporting that one of four ports of a lag group have gone down on a wireless LAN controller. Which troubleshooting methodology can be used to begin the troubleshooting process?
A. shoot from the hip
B. bottom-up
C. top-down
D. follow the path
E. divide and conquer
Answer: B