How Does Examcollection Cisco 300-460 exam fees Work?

Cause all that matters here is passing the Cisco 300-460 exam. Cause all that you need is a high score of 300-460 Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF) exam. The only one thing you need to do is downloading Testking 300-460 exam study guides now. We will not let you down with our money-back guarantee.

2021 Feb 300-460 free practice test

Q1. Which option lists the steps to configure a Cisco UCS B-Series server for jumbo frames and the Cisco Discovery Protocol? 

A. On the Servers tab, set CDP enabled under the vNIC interface. 

Set the vHBA MTU to 9000. 

Assign the network control policy to the vHBA. 

B. On the Servers tab, create a network control policy with CDP enabled. 

On the vNIC select the jumbo-frame checkbox. 

Assign the network control policy to the vNIC. 

C. On the LAN tab, create a network control policy with CDP enabled. 

Create a vNIC with an MTU of 9000. 

Assign the network control policy to the vNIC. 

D. On the LAN tab, create a vHBA template with an MTU of 9216. 

Select the CDP checkbox. 

Assign the network control policy to the vHBA. 

Answer: D 

Q2. Which three options describe the correct methods to install the Cisco Nexus 1000V VEM (VIB) software module on the VMware ESXi hypervisor? (Choose three.) 

A. using the “Add Host to vSphere Distributed Switch” dialog on the vSphere Network tab when Update Manager is installed 

B. esxcli software vib install –n/tmp/Cisco_bootbank_cisco-vem –v173-esx_5.2.1.3.1.4.0-3.2.1.vib 

C. executing the Deploy-Nexus 1000V-VSEM.ps1 script 

D. D. esxcli software vib install –v/tmp/Cisco_bootbank_cisco-vem –v173-esx_5.2.1.3.1.4.0-3.2.1.vib 

E. using the Host Selection dialog box in Cisco Virtual Switch Update Manager 

F. creating a baseline group in VMware Update Manager 

Answer: A,D,E 

Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_ 4/install/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314/b_Cisco_ N1KV_VMware_Install_and_Upgrade_Guide_521SV314a_chapter_01.html#task_F02BD7 7701B345D9B34A9332AA7C179F 

Q3. Which four options are required on a DCHP server to enable PXE boot? (Choose four.) 

A. boot server host name (TFTP server hostname or IP address) 

B. subnet mask 

C. DNS server 

D. lease time 

E. domain name 

F. bootfile name 

G. router (Gateway) 

Answer: A,B,C,G 

Reference: Refer to table 1 of the link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/bma-install-config/4-1/b_ucsd_bma_install_config_guide_41/b_ucsd_bma_install_config_guide_41_chapter_01 00.html 

Q4. Which three statements about context workflow mapping in Cisco UCS Director are true? (Choose three.) 

A. You can execute a workflow that contains a set of tasks from within a context of a component. 

B. Workflows cannot be mapped in the form of an action, nor can they be executed in the context of of a component 

C. You have to browse for a required workflow in the workflow list to execute it 

D. Context workflow mapping consists of two stages: Stage 1 – Create a context mapper task and add it to the workflow that must be mapped as an action Stage 2 – Add the workflow to the content mapper list by giving in an action label 

E. Context workflow mapping consists of two stages: Stage 1 – Create the workflow to the content mapper list by giving in an action label Stage 2 – Add a context mapper task to the workflow that must be mapped as an action 

F. You can map a workflow in the form of an action and execute it in the context of the component Workflows cannot be executed at the component level 

Answer: A,C,D 

Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/orchestration-guide/5-0/b_UCS_Director_Orchestration_Guide_5_0/b_UCS_Director_Orchestration_Guide_5_0_ chapter_0101.html#concept_3BA2EDADF4724218802E5CE3184B27A0 

Q5. An administrator is troubleshooting basic connectivity between two Fibre Channel points that include node hops and latency data. Which tool is the best for troubleshooting this scenario? 

A. ping 

B. fctraceroute 

C. traceroute 

D. fcping 

Answer: B 

Reference: Ping and traceroute are two of the most useful tools for troubleshooting TCP/IP networking problems. The ping utility generates a series of.echopackets to a destination across a TCP/IP internetwork. When the echo packets arrive at the destination, they are rerouted and sent back to the source. Using ping, you can verify connectivity and latency to a particular destination across an IP routed network. 

The traceroute utility operates in a similar fashion, but can also determine the specific path that a frame takes to its destination on a hop-by-hop basis. 

Up to the minute 300-460 pdf exam:

Q6. Which two pieces of information are needed when adding an NFS mount point in Cisco UCS Director? (Choose two.) 

A. the IP address of the NFS server where you plan to store the OS images for Bare Metal Agent to use 

B. the locate and organization where the NFS server is located 

C. the IP address of the IP share storage system 

D. the location of the NFS server where the OS images are stored 

Answer: A,D 

Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/bma-install-config/5-2/b_ucsd_bma_install_config_guide_5_2/b_ucsd_bma_install_config_guide_5_2_chapter_ 0110.html#task_FB4A6403CF4F4650B31A8C2C6FF4E69F 

Q7. Which three boot policies can be created for Cisco UCS Manager in Cisco UCS Director? (Choose three.) 

A. VLAN boot 

B. UEFI secure boot 

C. iSCSI boot 

D. NFS boot 

E. SAN boot 

F. FCOE boot 

Answer: A,C,E 

Reference: Various boot options are: 

SAN Boot 

LAN Boot 

Local Disk Boot 

Virtual Media Boot 

iSCSI Boot 

Q8. Which two fields are needed for a Cisco UCS Director administrator to configure a WWN block? (Choose two.) 

A. the first WWNN or WWPN address in the block 

B. the WWN for the initiator 

C. a unique name for the initiator 

D. a unique name for the block 

E. the number of WWN or WWPN addresses in the block 

Answer: A,E 

Reference: 

Q9. Which two statements describe Ethernet and vEthernet port profiles? (Choose two.) 

A. Ethernet port profiles may only be assigned to Cisco UCS unified ports when configured as type link. 

B. Ethernet port profiles are assigned to physical interfaces such as vmnics. vEthernet port profiles are assigned to virtual interfaces such as vNIC, vmk, or VTEP. 

C. An MTU change is required on the Ethernet port profiles to support jumbo frames. 

D. vEthernet port profiles are assigned to physical interfaces such as vmnics. Ethernet port profiles are assigned to virtual interfaces such as vNIC, vmk, or VTEP. 

Answer: B,C 

Q10. Which option describes the difference between in-band and out-of-band IP management pool in Cisco UCS? 

A. An out-of-band network is the only method to connect with the Cisco IMC blade. 

B. An in-band network policy requires twice the IP address space of an out-of-band policy. 

C. An out-of-band network is reachable over the Fabric Interconnect server interfaces, and in-band network is reachable over uplink interfaces. 

D. An out-of-band network is reachable over the Fabric Interconnect mgmt0 interfaces, and in-band network is reachable over uplink interfaces. 

Answer: D