Act now and download your Cisco 350-401 test today! Do not waste time for the worthless Cisco 350-401 tutorials. Download Down to date Cisco Implementing and Operating Cisco Enterprise Network Core Technologies exam with real questions and answers and begin to learn Cisco 350-401 with a classic professional.
Online Cisco 350-401 free dumps demo Below:
NEW QUESTION 1
How does Cisco Express Forwarding switching differ from process switching on Cisco devices?
- A. Cisco Express Forwarding switching uses adjacency tables built by the CDP protocol, and process switching uses the routing table.
- B. Cisco Express Forwarding switching uses dedicated hardware processors, and process switching uses the main processor.
- C. Cisco Express Forwarding swithing saves memory by storing adjacency tables in dedicated memory on the line cards, and process switching stores all tables in the main memory.
- D. Cisco Express Forwarding switching uses a proprietary protocol based on IS-IS for MAC address lookup, and process switching uses the MAC address table.
Answer: C
NEW QUESTION 2
What is a characteristic of YANG?
- A. It is a Cisco proprietary language that models NETCONF data
- B. It allows model developers to create custom data types
- C. It structures data in an object-oriented fashion to promote model reuse
- D. It provides loops and conditionals to control now within models
Answer: C
NEW QUESTION 3
A network engineer configures a WLAN controller with increased security for web access. There is IP connectivity with the WLAN controller, but the engineer cannot start a management session from a web browser. Which action resolves the issued
- A. Disable JavaScript on the web browser
- B. Disable Adobe Flash Player
- C. Use a browser that supports 128-bit or larger ciphers.
- D. Use a private or incognito session.
Answer: C
NEW QUESTION 4
SIMULATION
Simulation 01
BGP connectivity exists between Headquarters and both remote sites; however, Remote Site 1 cannot communicate with Remote Site 2. Configure BGP according to the topology to
goals:
* 1. Configure R1 and R3 under the BGP process to provide reachability between Remote Site 1 and Remote Site 2. No configuration changes are permitted on R2.
* 2. Ensure that the /32 networks at Remote Site 1 and Remote Site 2 can ping each other.
R1
R3
Solution:
See the solution below in Explanation:
- Solution:
On R1:
R1(config)#router bgp 123
R1(config-router)#address-family ipv4
R1(config-router-af)#neighbor 10.0.0.2 allowas-in
On R3:
R3(config)#router bgp 123
R3(config-router)# address-family ipv4
R3(config-router-af)#neighbor 192.168.1.2 allowas-in
VERIFICATION:
R3#sh ip route bgp
Gateway of last resort is not set 1.0.0.0/32 is subnetted, 1 subnets
B 1.1.1.1 [20/0] via 192.168.1.2, 00:01:17 2.0.0.0/32 is subnetted, 1 subnets
B 2.2.2.2 [20/0] via 192.168.1.2, 00:05:06 10.0.0.0/24 is subnetted, 1 subnets
B 10.0.0.0 [20/0] via 192.168.1.2, 00:01:17
Test Ping from R3 to R1:
R3#ping 1.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
R3#ping 1.1.1.1 source lo0 Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds: Packet sent with a source address of 3.3.3.3
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 5
A customer wants to use a single SSID to authenticate loT devices using different passwords. Which Layer 2 security type must be configured in conjunction with Cisco ISE to achieve this requirement?
- A. Fast Transition
- B. Central Web Authentication
- C. Cisco Centralized Key Management
- D. Identity PSK
Answer: D
NEW QUESTION 6
DRAG DROP
Drag and drop the automation characteristics from the left onto the corresponding tools on the right. Not all options are used.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 7
Refer to the exhibit.
An engineer is designing a guest portal on Cisco ISE using the default configuration. During the testing phase, the engineer receives a warning when displaying the guest portal. Which issue is occurring?
- A. The server that is providing the portal has an expired certificate
- B. The server that is providing the portal has a self-signed certificate
- C. The connection is using an unsupported protocol
- D. The connection is using an unsupported browser
Answer: B
NEW QUESTION 8
DRAG DROP
Drag and drop the characteristics from the left onto the deployment models on the right.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 9
Refer to the exhibit. What is the effect of this configuration?
- A. When users attempt to connect to vty lines 0 through 4, the device will authenticate them against TACACS+ if local authentication fails
- B. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+
- C. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey
- D. The device will allow only users at 192.166.0.202 to connect to vty lines 0 through 4
Answer: B
NEW QUESTION 10
Which A record type should be configured for access points to resolve the IP address of a wireless LAN controller using DNS?
- A. CISCO.CONTROLLER.localdomain
- B. CISCO.CAPWAP.CONTROLLER.localdomain
- C. CISCO-CONTROLLER.localdomain
- D. CISCO-CAPWAP-CONTROLLER.localdomain
Answer: D
NEW QUESTION 11
Which exhibit displays a valid JSON file?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: D
NEW QUESTION 12
Refer to the exhibit. What are two results of the NAT configuration? (Choose two.)
- A. Packets with a destination of 200.1.1.1 are translated to 10.1.1.1 or .2. respectively.
- B. A packet that is sent to 200.1.1.1 from 10.1.1.1 is translated to 209.165.201.1 on R1.
- C. R1 looks at the destination IP address of packets entering S0/0 and destined for inside hosts.
- D. R1 processes packets entering E0/0 and S0/0 by examining the source IP address.
- E. R1 is performing NAT for inside addresses and outside address.
Answer: BC
NEW QUESTION 13
What Is the difference between the MAC address table and TCAM?
- A. The MAC address table supports partial matche
- B. TCAM requires an exact match.
- C. The MAC address table is contained in TCAM ACL and QoS information is stored in CAM.
- D. Router prefix lookups happen in TCA
- E. MAC address table lookups happen In CAM.
- F. TCAM is used to make L2 forwarding decision
- G. CAM is used to build routing tables
Answer: C
Explanation:
"TCAM is most useful for building tables for searching on longest matches such as IP routing tables organized by IP prefixes. The TCAM table stores ACL, QoS and other information generally associated with upper-layer processing. As a result of using TCAM, applying ACLs does not affect the performance of the switch." https://community.cisco.com/t5/networking-documents/cam-content-addressable-memory- vs-tcam-ternary-content/ta-p/3107938
NEW QUESTION 14
Refer to the exhibit. A network engineer troubleshoots an issue with the port channel between SW1 and SW2. which command resolves the issue?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 15
Which OSPF networks types are compatible and allow communication through the two peering devices?
- A. broadcast to nonbroadcast
- B. point-to-multipoint to nonbroadcast
- C. broadcast to point-to-point
- D. point-to-multipoint to broadcast
Answer: A
Explanation:
The following different OSPF types are compatible with each other:
+ Broadcast and Non-Broadcast (adjust hello/dead timers)
+ Point-to-Point and Point-to-Multipoint (adjust hello/dead timers)
Broadcast and Non-Broadcast networks elect DR/BDR so they are compatible. Point- topoint/multipoint do not elect DR/BDR so they are compatible.
NEW QUESTION 16
......
P.S. Easily pass 350-401 Exam with 747 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 350-401 Dumps: https://www.2passeasy.com/dumps/350-401/ (747 New Questions)