It is impossible to pass Cisco 352-001 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Cisco 352-001 practice questions. You will get a surprising result by our Regenerate CCDE Written Exam practice guides.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 352-001 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 352-001 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/352-001-exam-dumps.html

Q101. Refer to the exhibit. 

A service provider using IS-IS has designed this network with all core links at the Layer 2 control plane. How will they adjust the design to reduce the flooding of update packets? 

A. Change the area type of the links to be level-1-2 to allow level-1 updates. 

B. Change the network type of the links from broadcast to point-to-point. 

C. Use IS-IS mesh groups. 

D. Configure SPF timers to be more aggressive so that updates are more quickly cleared from the queue. 

Answer: C 


Q102. A green data center is being deployed and a design requirement is to be able to readily scale server virtualization. Which IETF standard technology can provide this requirement? 

A. Transparent Interconnection of Lots of Links 

B. fabric path 

C. data center bridging 

D. unified fabric 

Answer: A 


Q103. Which three factors slow down network convergence? (Choose three.) 

A. constant interface flapping 

B. lack of redundant paths 

C. inconsistent topology states between routers 

D. transport network failing to generate LoS 

E. wrong summarization in ABRs 

Answer: ACD 


Q104. Your company requires two diverse multihop External Border Gateway Protocol peerings to a partner network. Which two methods would you use to improve lost peer detection? (Choose two.) 

A. Use Bidirectional Forwarding Detection for the peers. 

B. Use Selective Address Tracking and match the peers. 

C. Use subsecond keepalives for the peers. 

D. Use subsecond hold timers for the peers. 

E. Use Fast Peering Session Deactivation for the peers. 

F. Use subsecond minimum route advertisement Interval timers for the peers. 

Answer: BE 


Q105. When designing a large full mesh network running OSPF, how would you reduce LSA repetition? 

A. Elect a DR and BDR. 

B. Use access control lists to control outbound advertisements. 

C. Choose one or two routers to re-flood LSA information. 

D. Put each of the point-to-point links in your full mesh networking into a separate area. 

Answer: C 


Q106. Which statement about the behavior of OSPF on a hub-and-spoke topology is true? 

A. Additional host routes are added to the routing table on a NBMA network type. 

B. The DR and BDR election occurs regardless of the underlying OSPF network type. 

C. The DR election is a challenge unless a point-to-point network type is used. 

D. Traffic does not need to traverse the hub to reach the spokes. 

Answer: C 


Q107. You are hired to design a solution that will improve network availability for users on a campus network with routed access. If the budget limits you to three components, which three components would you recommend in your design proposal? (Choose three.) 

A. redundant power supplies in the access routers 

B. standby route processors for SSO in the core routers 

C. standby route processors for SSO in the distribution routers 

D. standby route processors for SSO in the access routers 

E. replace copper links between devices with fiber links 

Answer: ADE 


Q108. Network designers plan to interconnect two geographically separated data centers using an Ethernet-over-MPLS pseudowire. Within that design, the link between the sites is stable, there are no apparent loops in the topology, and the root bridges for the respective VLANs are stable and unchanging. What additional aspect of the design should be adjusted to mitigate the chance of connectivity issues to the peer data center when the connection takes place? 

A. Enable 802.1d on one data center, and 802.1w on the other. 

B. Ensure that the spanning tree diameter for one or more VLANs is not too large. 

C. Enable UDLD on the link between the data centers. 

D. Enable root guard on the link between the data centers. 

Answer: B 


Q109. You have been asked to establish a design that will allow your company to migrate from a WAN service to a Layer 3 VPN service. In your design, you are keeping some WAN links between critical sites as a backup for this service. You plan to use OSPF as your IGP and BGP for the PE-CE protocol. When the Layer 3 VPN service is available, how will you prevent transit traffic over the backup links? 

A. Redistribute routes at the CE as external type 1. 

B. Redistribute routes at the CE as external type 2. 

C. Use conditional advertisement only when the Layer 3 service is down. 

D. Manually turn off the backdoor link when the Layer 3 service is up. 

Answer: D 


Q110. A Tier-3 Service Provider is evolving into a Tier-2 Service Provider due to the amount of Enterprise business it is receiving. The network engineers are re-evaluating their IP/MPLS design considerations in order to support duplicate/overlapping IP addressing from their Enterprise customers within each Layer 3 VPN. Which of the following would need to be reviewed to ensure stability in their network? 

A. Assigning unique Route Target ID's 

B. Assigning unique Route Distinguishers 

C. Assigning unique IP address space for the Enterprise NAT/Firewalls 

D. Assigning unique VRF ID's to each Layer 3 VPN 

Answer: B