Actual of 3V0-42.20 exam answers materials and test engine for VMware certification for client, Real Success Guaranteed with Updated 3V0-42.20 pdf dumps vce Materials. 100% PASS Advanced Design VMware NSX-T Data Center exam Today!

Also have 3V0-42.20 free dumps questions for you:

NEW QUESTION 1
A Solutions Architect is assisting a service provider with designing an NSX-T Data Center solution for these environments:
Virtual Data Center to Virtual Data Center connectivity Tenant workload on-boarding to Virtual Data Centers. These requirements must be met:
3V0-42.20 dumps exhibit scalability across 5 data centers
3V0-42.20 dumps exhibit all sites have a latency of 180ms
3V0-42.20 dumps exhibit MTU between sites is 1800
3V0-42.20 dumps exhibit bandwidth is 100Mbps between sites
3V0-42.20 dumps exhibit multi-tenancy
Which two selections should the Solutions Architect propose to the service provider? (Choose two.)

  • A. Configure Remote TEPs for stretching network services between Virtual Data Centers.
  • B. Utilize SSL VPN for workloads on-boarding from on-premises to Virtual Data Centers.
  • C. Configure IPSec VPN for Tenant T0 gateways for Virtual Data Centers connectivity
  • D. Configure IPSec VPN for Tenant T1 gateways for Virtual Data Centers connectivity.
  • E. Utilize L2 VPN for workloads on-boarding from on-premises to Virtual Data Centers.

Answer: DE

NEW QUESTION 2
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which two requirements were documented by the architect? (Choose two.)

  • A. There are applications which use IPv6 addressing.
  • B. Dynamic routing should be configured between the physical and virtual network.
  • C. Hosts can only be configured with two physical NICs.
  • D. The storage array has enough capacity to deploy NSX components.
  • E. Network administrators are not familiar with NSX-T Data Center solutions.

Answer: BD

NEW QUESTION 3
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Maximum performance and availability is required between the physical and virtual network.
3V0-42.20 dumps exhibit Load Balancing service is required for back-end web servers.
3V0-42.20 dumps exhibit NAT is required.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Deploy a Tier-1 gateway and connect it to an Active/Active Tier-0 gateway with ECMP configured.
  • B. Deploy an Active/Active Tier-0 gateway and configure ECMP.
  • C. Deploy an Active/Standby Tier-0 gateway and configure ECMP.
  • D. Create two separate VLANs to connect the Tier-0 gateway upstream traffic and configure ECMP.

Answer: C

NEW QUESTION 4
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit Data between two networks connected over a public network needs to be encrypted.
3V0-42.20 dumps exhibit Certificate authentication is required.
3V0-42.20 dumps exhibit Dynamic route learning is preferred.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Deploy a Tier-0 gateway in Active/Standby mod
  • B. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • C. Deploy a Tier-0 gateway in Active/Active mod
  • D. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • E. Deploy a Tier-0 gateway in Active/Standby mod
  • F. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
  • G. Deploy a Tier-0 gateway in Active/Active mod
  • H. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.

Answer: C

NEW QUESTION 5
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit NSX-T will span across two sites for disaster recovery.
3V0-42.20 dumps exhibit Public Load Balancer VIP should be accessible from a secondary site.
3V0-42.20 dumps exhibit Distributed Firewall Policies should be available at a secondary site.
3V0-42.20 dumps exhibit Routing capabilities should be maintained after failure.
3V0-42.20 dumps exhibit NAT capabilities are required.
Which two selections should the architect include in their design? (Choose two.)

  • A. Use of the same ISPs across sites.
  • B. Use two separate ISPs across sites.
  • C. Use MTU to 1550 between sites.
  • D. Set MTU to 1550 between sites.
  • E. Use IP sets or groups to configure DFW rules.

Answer: AE

NEW QUESTION 6
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase:
3V0-42.20 dumps exhibit There isn??t much budget available for a new off shore site.
3V0-42.20 dumps exhibit The new site is decentralized and no communication with the main data center is required.
3V0-42.20 dumps exhibit The design will need to cater for availability, upgrades, and failure scenarios.
3V0-42.20 dumps exhibit N+1 must be maintained at all times.
Which three selections should the architect recommend in their design? (Choose three.)

  • A. Separate the hosts physical NICs for VSS and N-VDS.
  • B. Make all pNICs part of N-VDS and VMKs will be migrated.
  • C. Collapse the Management/Edge/Compute cluster.
  • D. Install a minimum 4 ESXi hosts in the site.
  • E. A Shared Edge/Management cluster and one for Compute.
  • F. Install a minimum of 3 ESXi hosts in the site.

Answer: ABC

NEW QUESTION 7
An NSX-T Architect is working in a brownfield environment with 4 ESXi hosts. These constraints were documented:
3V0-42.20 dumps exhibit new servers cannot be purchased
3V0-42.20 dumps exhibit North/South bandwidth must be guaranteed
3V0-42.20 dumps exhibit Top-of-Rack switches have additional uplinks
Which three recommendations should the architect implement? (Choose three.)

  • A. Remove one of the ESXi hosts and install a bare-metal Edge.
  • B. Use a resource pool for production workloads.
  • C. Use a resource pool to deploy the Edge nodes on.
  • D. Recommend obtaining 2 new physical NICs for the servers.
  • E. Install Edge nodes on a separate cluster.

Answer: ACD

NEW QUESTION 8
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the assessment:
3V0-42.20 dumps exhibit There must be a performance based SLA for East ?C West traffic.
Which two key performance features should the architect recommend? (Choose two.)

  • A. Configure N-VDS enhanced Data Path
  • B. Install advanced Edge pNIC Features
  • C. Setup RSS to leverage multiple cores
  • D. Leverage DPDK drivers
  • E. Enable GENEVE Offload

Answer: CE

NEW QUESTION 9
Which type of design includes vendor models, host names, IP Addresses, port connections, logical unit number sizes, and number of CPUs? (Choose the best answer.)

  • A. Physical Design
  • B. Conceptual Design
  • C. High-Level Design
  • D. Logical Design

Answer: A

NEW QUESTION 10
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:
3V0-42.20 dumps exhibit Some workloads should be moved to a Cloud Provider.
3V0-42.20 dumps exhibit Extend network??s VLAN or VNI across sites on the same broadcast domain.
3V0-42.20 dumps exhibitSupport 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)

  • A. Load Balancer
  • B. Reflexive NAT
  • C. SSL VPN
  • D. L2 VPN

Answer: D

NEW QUESTION 11
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit Existing hardware will be used in any design proposal.
3V0-42.20 dumps exhibit Network bandwidth cannot be expanded.
Which concept of the Discover Task do these items belong to? (Choose the best answer.)

  • A. constraint
  • B. requirement
  • C. risk
  • D. assumption

Answer: A

NEW QUESTION 12
A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.
Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)

  • A. Distributed IDS
  • B. EVPN
  • C. Load Balancer
  • D. BGP

Answer: D

NEW QUESTION 13
An NSX-T architect is working with a customer who wants to improve performance and future-proof their workloads with a multi-site architecture.
A current-state analysis captured this information:
3V0-42.20 dumps exhibit Latency between sites is 160ms.
3V0-42.20 dumps exhibit Bandwidth is 2Gbps.
3V0-42.20 dumps exhibit The MTU is 1600.
What two VMware design recommendations should the architect recommend to the organization to achieve future-proofing? (Choose two.)

  • A. MTU is recommended to be 9000.
  • B. MTU must be at least 1700.
  • C. Bandwidth must be at least 10Gbps.
  • D. Latency RTT is acceptable.
  • E. Latency must be less than 150ms.

Answer: AE

NEW QUESTION 14
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Enagagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which constraint was documented by the architect? (Choose the best answer.)

  • A. Dynamic routing should be configured between the physical and virtual network.
  • B. There are applications which use IPv6 addressing.
  • C. Hosts can only be configured with two physical NICs.
  • D. There are enough CPU and memory resources in the existing management cluster.

Answer: A

NEW QUESTION 15
A customer wants to place their NSX Managers in different subnets.
Which would an architect recommend to support the request? (Choose the best answer.)

  • A. Use a load balancer.
  • B. Use round-robin DNS.
  • C. Use NAT.
  • D. Use a cluster Virtual IP.

Answer: D

NEW QUESTION 16
According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk? (Choose the best answer.)

  • A. Enough power and cooling capacity is available in each rack in the data center.
  • B. To retain certification to provide financial services to end customers, PCI-DSS audits need to be passed.
  • C. A merger and acquisition process was recently completed and new company on-boarding is not completed.
  • D. Due to existing contracts and purchase agreements, the existing server hardware needs to be reused.

Answer: B

NEW QUESTION 17
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:
3V0-42.20 dumps exhibit There are applications which use IPv6 addressing.
3V0-42.20 dumps exhibit Network administrators are not familiar with NSX-T Data Center solutions.
3V0-42.20 dumps exhibit Hosts can only be configured with two physical NICs.
3V0-42.20 dumps exhibit There is an existing management cluster to deploy the NSX-T components.
3V0-42.20 dumps exhibit Dynamic routing should be configured between the physical and virtual network.
3V0-42.20 dumps exhibit There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)

  • A. Network administrators are not familiar with NSX-T Data Center solutions.
  • B. Dynamic routing should be configured between the physical and virtual network.
  • C. There are applications which use IPv6 addressing.
  • D. There is a storage array available to deploy NSX-T components.

Answer: B

NEW QUESTION 18
Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)

  • A. Reduces storage requirements.
  • B. Reduces cost.
  • C. Preserves packet locality.
  • D. Reduces egress data.
  • E. Preserves switchports.

Answer: BD

NEW QUESTION 19
What is a design justification for a solution with 3 NSX Manager nodes deployed in a 4 ESXi cluster Management Cluster? (Choose the best answer.)

  • A. NSX Controllers are separated from NSX Managers allowing 6 ESXi servers to host them.
  • B. NSX Management Plane and Control Plane will be reduced to a single point of failure.
  • C. Compute consumption guarantees NSX Manager nodes can be run on the same ESXi host.
  • D. Single point of failure on Control Plane and Management Plane will be mitigated.

Answer: B

NEW QUESTION 20
A customer wants to use ECMP to provide additional throughput and availability for their critical business applications. Some applications require load balancing for scale and availability.
Which two Edge design choices can an architect present to the customer? (Choose two.)

  • A. Create a Tier-0 gateway in Active/Standby mode and a Tier-1 gateway in Active/Standby mode.
  • B. Configure ECMP and Load Balancing on the Tier-0 gateway.
  • C. Create a Tier-0 gateway in Active/Active mode and a Tier-1 gateway in Active/Standby mode.
  • D. Create a Tier-0 gateway in Active/Standby mode.
  • E. Configure ECMP on the Tier-0 gateway and Load Balancing on the Tier-1 gateway.

Answer: BD

NEW QUESTION 21
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. Which risk is documented by an architect? (Choose the best answer.)

  • A. The security team has a firewall communication matrix documented.
  • B. The team is not trained for NSX-T but have a very strong experience with vSphere.
  • C. Open communication between different application tiers is not allowed.
  • D. Aggregate N-S throughput at any given time should be at least 10G.

Answer: B

NEW QUESTION 22
Refer to the exhibits.
Design Option1:
3V0-42.20 dumps exhibit
Design Option 2:
3V0-42.20 dumps exhibit
Design Option 3:
3V0-42.20 dumps exhibit
Design Option 4:
3V0-42.20 dumps exhibit
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. The conceptual design includes these requirements, assumptions, constraints, and risks:
3V0-42.20 dumps exhibit Critical applications must run across sites without changing IP address.
3V0-42.20 dumps exhibitRTO/RPO must be reduced for recovery of applications on secondary site.
3V0-42.20 dumps exhibit IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)

  • A. Design Option 4
  • B. Design Option 2
  • C. Design Option 1
  • D. Design Option 3

Answer: C

NEW QUESTION 23
......

100% Valid and Newest Version 3V0-42.20 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/3V0-42.20/ (New 57 Q&As)