Master the 500-710 Cisco Video Infrastructure Implementation content and be ready for exam day success quickly with this Exambible 500-710 free exam questions. We guarantee it!We make it a reality and give you real 500-710 questions in our Cisco 500-710 braindumps.Latest 100% VALID Cisco 500-710 Exam Questions Dumps at below page. You can use our Cisco 500-710 braindumps and pass your exam.

Free demo questions for Cisco 500-710 Exam Dumps Below:

NEW QUESTION 1
Which method does the Conductor use to determine the source of an incoming call to a rendezvous type conference?

  • A. conference IP addresses
  • B. location IP addresses
  • C. management IP addresses
  • D. source IP addresses

Answer: B

NEW QUESTION 2
While scheduling a CMS conference on TMS, an engineer notices that it will not add a WebEx meeting as a participant. Which option is the possible issue?

  • A. WebEx requires a domain be added to the CMS.
  • B. WebEx can be added to conferences only using Telepresence Server/Conductor.
  • C. A SIP trunk is required between the WebEx server and CMS.
  • D. The WebEx server address must be properly configured in TMS and the CM

Answer: B

NEW QUESTION 3
Integrated Development Environment helps you to develop, test, and build an application. Which option is an IDE tool that can be used with Cisco Spark?

  • A. GitHub
  • B. OSX: Atom
  • C. Windows: Notepad ++
  • D. Linux: Brackets
  • E. Pythonanywhere

Answer: A

NEW QUESTION 4
For Business to Business calls, which option must be configured on an Expressway Edge to route calls to an unknown domain?

  • A. SIP trunk to a public DNS server
  • B. traversal zone to a public DNS address
  • C. DNS zone and a public DNS address
  • D. neighbor zone to the other business

Answer: C

NEW QUESTION 5
Where does an engineer lookfora list of all endpoints registered to an Expressway?

  • A. Status > Registrations > By Device
  • B. Configuration > Registrations > Registration ListC Registrations can only be found in the CLI interface.
  • C. Status > Calls > Call History

Answer: A

NEW QUESTION 6
The TMS Systems > Navigator menu selection is not visible on a scheduler's computer. Which cause is the most likely?

  • A. The scheduler s computer has a port blockage.
  • B. NET or US is not set up on the scheduler's computer.
  • C. The scheduler does not have adequate permissions associated to their log in credentials.
  • D. The network has a port blockag

Answer: C

NEW QUESTION 7
An engineer wants to schedule endpoints that are registered to the Cisco UCM to conferences using TMS. Which action is required before endpoints can be scheduled?

  • A. The Cisco UCM must have a SIP trunk directed at TMS.
  • B. Only endpoints registered to VCS or Expressway can be scheduled in conferences by TMS.
  • C. The Cisco UCM must first be added to a folder in TMS Systems > Navigator.
  • D. The MAC address of the endpoint must be entered in the System > Manage Dial Plan men

Answer: C

NEW QUESTION 8
Cisco Meeting Server uses four API commands to interact with the server. Which API command is used to modify a
configuration setting on the Cisco Meeting Server?

  • A. DELETE
  • B. PUT
  • C. POST
  • D. GET

Answer: B

NEW QUESTION 9
Cisco Meeting Server has several components that can be enabled to expand the functionality of the server. Which component is used for interworking between different communication protocols?

  • A. web bridge
  • B. load balancer
  • C. TURN server
  • D. H.323 gateway
  • E. SIP edge
  • F. call bridge
  • G. XMPP

Answer: D

NEW QUESTION 10
An engineer wants to use TMS to send registration configurations automatically every Sunday at 3:00 a.m. to a group of endpoints in a remote office. Where does the engineer navigate to create this setting?

  • A. Systems> Manage Dial Plan
  • B. Systems > Configuration Templates
  • C. Systems > Provisioning
  • D. Systems > Navigator

Answer: B

NEW QUESTION 11
Which Iwo administrative functions can a Cisco Spark Partner reseller perform from the Osco Spark Management portal? (Choose two.)

  • A. Quickly start customer trials.
  • B. Determine Single Sign-On customer usage reports.
  • C. Enable Single Sign-On and Directory sync through corporate LDAP services on-premises.
  • D. Determine role-based access and view usage reports.
  • E. Help to manage the customer account

Answer: AE

NEW QUESTION 12
Which Cisco WebEx products can support up to 3000 attendees?

  • A. Cisco WebEx Meeting Center
  • B. Cisco WebEx Event Center
  • C. Cisco WebEx Training Center
  • D. Cisco WebEx Support Center

Answer: B

NEW QUESTION 13
Which Cisco WebEx products can support calls from end points and WebEx clients?

  • A. Cisco WebEx Meeting Center
  • B. Cisco WebEx Training Center
  • C. Cisco WebEx Support Center
  • D. Cisco WebEx Event Center

Answer: A

NEW QUESTION 14
Which group of items must be configured when adding a Cisco Meeting Server toTMS before the server can be used in scheduled conferences?

  • A. DNS address, numeric ID base, numeric ID quantity
  • B. domain, numeric ID base, conference ID range
  • C. MACaddress, numeric ID base, numeric ID quantity
  • D. domain, numeric ID base, numeric ID quantity

Answer: D

NEW QUESTION 15
Which description of the role of the conference alias in the Cisco Conductor is true?

  • A. It determines the bridge pool to be selected for a conference.
  • B. The conference template determines the bridge pool to be selected for a conference.
  • C. It is dialed by a user and Conductor uses that alias to determine the conference template.
  • D. It selects the Expressway to be used for media traversa

Answer: C

NEW QUESTION 16
Which information can be retrieved from the Cisco event log on the Telepresence Server?

  • A. view and sort through conferencing events
  • B. view upcoming conferences
  • C. view registration events
  • D. view packet loss, jitter, and latency of a call

Answer: D

NEW QUESTION 17
Which statement about the deployment of Cisco Conductor with Cisco Telepresence Server for Rendezvous Conferences is true?

  • A. Conductor must be added to the TMS database.
  • B. A SIP trunk must be established between Conductor and the TelePresence Server.
  • C. A neighbor zone and search rules must be built between the Expressway and the Conductor.
  • D. A neighbor zone and search rules must be built between the Expressway and TelePresence Serve

Answer: C

NEW QUESTION 18
Which two options are included in an endpoint registration request message that is sent to a SIP Server? (Choose two.)

  • A. SIP Server IP address
  • B. E.164 address
  • C. Endpoint IP address
  • D. E.164URI
  • E. SIP URI

Answer: AE

NEW QUESTION 19
Which protocol is used to communicate codec capabilities and Real-Time Transport Protocol ports?

  • A. Real-Time Transport Control Protocol
  • B. Session Description Protocol
  • C. H.460
  • D. Assent

Answer: B

NEW QUESTION 20
Which type of Cisco Spark Bot acts as a text-based remote control for external services?

  • A. Spark DocuSign Bot
  • B. SMS to Spark Bot
  • C. assistants
  • D. Spark Poll Bot
  • E. controllers
  • F. notifiers

Answer: B

NEW QUESTION 21
......

Recommend!! Get the Full 500-710 dumps in VCE and PDF From Thedumpscentre.com, Welcome to Download: https://www.thedumpscentre.com/500-710-dumps/ (New 91 Q&As Version)