♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
Q71. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Server1 and Server2 are member servers.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Remote Server Administration Tools on Server1.
B. Install Windows Management Framework 3.0 on Server2.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: B,D
Explanation:
To be able to fully manage remote servers that run Windows Server 2008 or the R2 Service Pack 1 operating system, you should install the .NET Framework 4 on Server2 first followed by the Windows Management Framework 3.0.
Q72. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and a global security group named Group1.
You need to add a new domain controller to the domain.
You install Windows Server 2012 R2 on a new server named DC3.
Which cmdlet should you run next?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install WindowsFeature
D. Install AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: C
Explanation:
It is the 2nd step when installing a DC by powershell on a fresh server.
Q73. - (Topic 3)
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company’s desktop applications. A network technician shares Folder1 as Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B
Q74. - (Topic 3)
You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise.
Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1.
For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system. You install the drivers for the wireless network adapter.
You need to ensure that you can connect to Network1 from Windows Server 2012 R2.
What should you do?
A. Restart the WLAN AutoConfig service.
B. From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.
C. From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.
D. From Server Manager, install the Wireless LAN Service feature.
Answer: D
Explanation:
The Wireless LAN service is a feature in Windows Server. 2012 R2 that you can use to enable the wireless WLAN AutoConfig service, and to configure the WLAN AutoConfig service for automatic startup. Once enabled, the WLAN AutoConfig service dynamically selects which wireless network the computer automatically connects to, and configures the necessary settings on the wireless network adapter. This includes automatically selecting and connecting to a more preferred wireless network when one becomes available. To enable the Wireless LAN Service In Server Manager Dashboard, click Manage, and then click Add Roles and Features. The Add Roles and Features Wizard opens. Click Next. In Select installation type, select Role-based or feature-based installation, and then click Next. In Select destination server, enable Select a server from the server pool, and in Server Pool, select the server for which you want to enable the Wireless LAN Service, and then click Next. In Select server roles, click Next. In Select Server features, in Features, select Wireless LAN Service, and then click Next.
: http://technet.microsoft.com/en-us/library/hh994698.aspx
Q75. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to create a new volume on Server1.
The new volume must have the following configurations: Be stored on a new virtual hard disk Be assigned the drive letter G Have the NTFS file system In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Q76. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has two physical disks installed. The C: drive hosts the boot partition, while the D: drive is not being used. Both disks are online.
You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequent to creating the virtual machine, you have to connect the D: drive to the virtual machine.
Which of the following is TRUE with regards to connecting a physical disk to a virtual machine?
A. The physical disk should not be online.
B. The physical disk should be uninstalled and re-installed.
C. The physical disk should be configured as a striped disk.
D. The physical disk should be configured as a mirrored disk.
Answer: A
Explanation:
Your virtual machines can also be connected to physical hard disks on the virtualization server virtual hard disks. (This is sometimes referred to as having a “pass-through” disk connected to a virtual machine.) The physical hard disk that you connect to a virtual machine can also be a network-attached disk, like a logical unit number (LUN) in a storage area network (SAN). A common example is an iSCSI LUN that has been mapped to the virtualization server by using Microsoft iSCSI Initiator. Because the virtualization server sees network-attached storage as local disks, the iSCSI LUN can be connected to a virtual machine. The most important limitation about having a physical hard disk connected to a virtual machine is that it cannot be connected to the virtualization server or to other virtual machines at the same time. The virtual machine must have exclusive access to the physical hard disk. Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-Vserver perspective.
Q77. - (Topic 3)
You have a print server named Server1.
You install a printer on Server1. You share the printer as Printer1.
You need to configure Printer1 to be available only from 19:00 to 05:00 every day.
Which settings from the properties of Printer1 should you modify?
A. Sharing
B. Security
C. Advanced
D. Device Settings
E. Ports
Answer: C
Explanation:
When navigating to the printer properties, the Properties tab is divided into several different tabs of which the Advanced tab will give you access to the scheduling where you can configure the availability of the printer.
: http://technet.microsoft.com/en-us/library/cc722526.aspx
Q78. - (Topic 3)
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.
ABC.com’s user accounts are located in an organizational unit (OU), named ABCStaff. ABC.com’s managers belong to a group, named ABCManagers.
You have been instructed to create a new Group Policy object (GPO) that should be linked to the ABCStaffOU, but not affect ABC.com’s managers.
Which of the following actions should you take?
A. You should consider removing the user accounts of the managers from the ABCStaff OU.
B. You should consider configuring the new GPO’s WMI filter.
C. You should consider adding the user accounts of ABC.com’s managers to the Admins group.
D. You should consider adding the user accounts of ABC.com’s managers to the local Administrators group.
Answer: B
Q79. - (Topic 2)
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the
likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS
B. FAT32
C. ReFS
D. NTFS
Answer: C
Explanation:
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
Q80. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk. Which tool should you use?
A. diskpart.exe
B. vdsldr.exe
C. fsutil.exe
D. vds.exe
Answer: A