It is impossible to pass Microsoft 70-412 exam without any help in the short term. Come to Testking soon and find the most advanced, correct and guaranteed Microsoft 70-412 practice questions. You will get a surprising result by our Improved Configuring Advanced Windows Server 2012 Services practice guides.

2021 Mar 70-412 test engine

Q141. Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. The File Server Resource Manager role service is installed on Server1. All servers run Windows Server 2012 R2. 

A Group Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. The following graphic shows the configured settings in GPO1. 

Server1 contains a folder named Folder1. Folder1 is shared as Share1. 

You attempt to configure access-denied assistance on Server1, but the Enable access-denied assistance option cannot be selected from File Server Resource Manager. 

You need to ensure that you can configure access-denied assistance on Server1 manually by using File Server Resource Manager. 

Which two actions should you perform? 

A. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1. 

B. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1. 

C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1. 

D. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1. 

Answer: C,D 

Explanation: 

C. To configure access-denied assistance for all file types by using Group Policy . Open Group Policy Management. In Server Manager, click Tools, and then click 

Group Policy Management. . Right-click the appropriate Group Policy, and then click Edit. . Click Computer Configuration, click Policies, click Administrative Templates, click 

System, and then click Access-Denied Assistance. 

Right-click Enable access-denied assistance on client for all file types, and then 

click Edit. 

Click Enabled, and then click OK. 

D. To configure access-denied assistance by using Group Policy (see step 5) 

Open Group Policy Management. In Server Manager, click Tools, and then click 

Group Policy Management. 

Right-click the appropriate Group Policy, and then click Edit. 

Click Computer Configuration, click Policies, click Administrative Templates, click 

System, and then click Access-Denied Assistance. 

Right-click Customize message for Access Denied errors, and then click Edit. 

Select the Enabled option. 

Etc Reference: Deploy Access-Denied Assistance (Demonstration Steps) http://technet.microsoft.com/en-us/library/hh831402.aspx 


Q142. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. Server1 has an IPv6 scope named Scope1. 

You implement an additional DHCP server named Server2 that runs Windows Server 2012 R2. 

You need to provide high availability for Scope1. The solution must minimize administrative effort. 

What should you do? 

A. Install and configure Network Load Balancing (NLB) on Server1 and Server2. 

B. Create a scope on Server2. 

C. Configure DHCP failover on Server1. 

D. Install and configure Failover Clustering on Server1 and Server2. 

Answer: C 

Explanation: 

Overview: Configure DHCP failover using the DHCP console To configure DHCP failover using the DHCP console, right-click a DHCP scope or right-click IPv4 and then click Configure Failover. 

Configure Failover 

The Configure Failover wizard guides you through configuring DHCP failover on the 

selected scope. 

Note: The DHCP server failover feature, available in Windows Server 2012 and later, 

provides the ability to have two DHCP servers provide IP addresses and option 

configuration to the same subnet or scope, providing for continuous availability of DHCP 

service to clients. 

Incorrect: 

Not A. NLB is not related to DHCP scope availability. 

Not B. DHCP failover requirements include: 

DHCP Scopes requirement: 

At least one IPv4 DHCP scope must be configured on the primary DHCP server. 

The same DHCP scope ID, or an overlapping scope, must not be configured on the failover 

partner. 

Not D. Failover clustering is possibly, but would not minimize administration. 

Reference: Deploy DHCP Failover 


Q143. HOTSPOT 

Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2. 

Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the URL http://app1.contoso.com. 

You deploy a new server named Server3 that runs Windows Server 2012 R2. The contoso.com DNS zone contains the records shown in the following table. 

You need to add Server3 to the NLB cluster. 

What command should you run? 

To answer, select the appropriate options in the answer area. 

Answer: 


Leading 70-412 vce:

Q144. DRAG DROP 

You have a file server named Server1 that runs Windows Server 2012 R2. The folders on Server1 are configured as shown in the following table. 

A new corporate policy states that backups must use Windows Azure Online Backup whenever possible. 

You need to identify which technology you must use to back up Server1. The solution must use Windows Azure Online Backup whenever possible. 

What should you identify? 

To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 

Answer: 


Q145. Your network contains an Active Directory domain named adatum.com. The domain contains a file server named FS1 that runs Windows Server 2012 R2 and has the File Server Resource Manager role service installed. All client computers run Windows 8. 

File classification and Access-Denied Assistance are enabled on FS1. 

You need to ensure that if users receive an Access Denied message, they can request assistance by email from the Access Denied dialog box. 

What should you configure? 

A. A file management task 

B. A classification property 

C. The File Server Resource Manager Options 

D. A report task 

Answer: C 

Explanation: 

You can configure access-denied assistance individually on each file server by using the File Server Resource Manager console. 

Note: 

To configure access-denied assistance by using File Server Resource Manager 

Open File Server Resource Manager. In Server Manager, click Tools, and then 

click File Server Resource Manager. 

Right-click File Server Resource Manager (Local), and then click Configure 

Options. 

Click the Access-Denied Assistance tab. 

Select the Enable access-denied assistance check box. 

In the Display the following message to users who are denied access to a folder or 

file box, type a message that users will see when they are denied access to a file 

or folder. 

You can add macros to the message that will insert customized text. 

Click Configure email requests, select the Enable users to request assistance 

check box, and then click OK. 

Click Preview if you want to see how the error message will look to the user. 

Click OK. 

Reference: Deploy Access-Denied Assistance (Demonstration Steps) 


Q146. Your network contains two servers named Server1 and Server 2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed. 

Server1 hosts a virtual machine named VM1. The virtual machine configuration files and the virtual hard disks for VM1 are stored in D: VM1. 

You shut down VM1 on Server1. 

You copy D:VM1 to D:VM1 on Server2. 

You need to start VM1 on Server2. You want to achieve this goal by using the minimum amount of administrative effort. 

What should you do? 

A. Run the Import-VMIntialReplication cmdlet. 

B. Create a new virtual machine on Server2 and attach the VHD from VM1 to the new virtual machine. 

C. From Hyper-V Manager, run the Import Virtual Machine wizard. 

D. Run the Import-IscsiVirtualDisk cmdlet. 

Answer: C 

Explanation: 

Starting in Windows Server 2012, you no longer need to export a virtual machine to be able to import it. You can simply copy a virtual machine and its associated files to the new host, and then use the Import Virtual Machine wizard to specify the location of the files. This registers the virtual machine with Hyper-V and makes it available for use. 

In addition to the wizard, the Hyper-V module for Windows PowerShell includes cmdlets for importing virtual machines. For more information, see Import-VM 

Reference: Overview of exporting and importing a virtual machine