Our pass rate is high to 98.9% and the similarity percentage between our exam 70 680 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Microsoft 70 680 practice test exam in just one try? I am currently studying for the Microsoft 70 680 practice test exam. Latest Microsoft exam 70 680 Test exam practice questions and answers, Try Microsoft microsoft 70 680 Brain Dumps First.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
Q31. - (Topic 4)
Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BrachCache features installed.
You add new client computers the network. The computers have Windows 7 installed and are members of a workgroup.
You need to ensure that the new client computers are configured to cache and share files.
What should you do?
A. Run the Netsh branchcache set service mode=HOSTEDSERVER client authentication=NONE command
B. Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702, and inbound and outbound trafficfor local TCP port 80.
C. Create a Group Policy that sets Hash Publication for BranchCache as disabled.
D. Run the netsh branchcache set service mode=DISTRIBUTED command.
E. Create a Group Policy object and configure the Set percentage of disk space used for client computer cache option.
F. Check permisions.
G. Run the netsh branchcache set service mode=HOSTEDCLIENT command.
H. Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.
I. Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and outbound traffic for local TCP port 8443.
Answer: D
Q32. DRAG DROP - (Topic 6)
A company has an Active Directory forest which is shown in the following graphic.
The company's client computers run Windows 7. You deploy BitLocker Drive Encryption on all the client computers.
You need to configure BitLocker Drive Encryption to back up recovery information to Active Directory for BitLocker protected drives and the Trusted Platform Module (TPM).
Which actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q33. HOTSPOT - (Topic 6)
You work with Windows 7 computers.
Your company has a policy of not allowing software to be upgraded without proper authorization from the managers.
You set a Software Restriction Policy to allow only a certain version of Microsoft Word 2010 to run. The policy of the Local Group Policy Editor is shown in the Policy Editor exhibit. (Click the Exhibit button.)
Additionally, the hash policy for WmWord. exe is shown in the Hash Policy exhibit. (Click the Exhibit button. )
Any upgrades or change to the WinWord.exe will result in the program not operating.
When you attempt to run MS Word, the program does not execute. The error is shown in the Hashblock exhibit. (Click the Exhibit button.)
Consider each of the following statements. Does the information in the three statements support the inference as stated? (This question is worth three points. )
Answer:
Q34. - (Topic 1)
You have a Virtual Hard Disk (VHD) and a computer that runs Windows 7. The VHD has Windows 7 installed.
You need to start the computer from the VHD.
What should you do?
A. From Diskpart.exe, run Select vdisk.
B. From Disk Management, modify the active partition.
C. Run Bootcfg.exe and specify the /default parameter.
D. Run Bcdedit.exe and modify the Windows Boot Manager settings.
Answer: D
Explanation:
When you have created a VHD and installed a system image on it, you can use the BCDEdit tool Bcdedit.exe to add a boot entry for the VHD file in your computer running Windows 7.
Q35. - (Topic 1)
Which of the following is used to control when the security pop-up notifications are used?
A. Security Control Manager
B. User Account Control
C. User Access Control Panel
D. Notification Control Settings Manager
Answer: B
Q36. - (Topic 2)
You have a computer that runs Windows 7. The computer is joined to a domain.
You need to ensure that only approved USB drives can be used on the computer.
Which two policy settings should you configure? (Each correct answer presents part of the solution. Choose two.)
A. Enable Prevent installation of removable devices.
B. Enable Prevent installation of devices not described by other policy settings.
C. Enable Prevent installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.
D. Enable Allow installation of devices that match any of these device IDs and enter the device ID for the approved USB drives.
Answer: B,D
Q37. - (Topic 2)
You have a computer that runs windows 7.
You log on to the computer by using a user account that is a member of Administrator Group.
From Windows Explorer you open C:windowssystem32driversetchosts in notepad.
You attempt to save the file and receive the save as dialog box.
You need to ensure that you can save changes to c:windowssystem32drivers
What should you do?
A. Stop the windows search service
B. Remove the inherited permissions from the file.
C. Start Windows Notepad by using elevated privileges.
D. Change the user account control (UAS) settings to Notify Me Only when programs try to make changes to my computer.
Answer: C
Explanation:
Windows 7 does not allow applications to write data to these secure locations.
User Account Control (UAC)UAC is a security feature of Windows 7 that informs you when
the action that you want to undertake requires an elevation of privileges. If you logged on with a user account that was a member of the local administrators group in previous versions of Microsoft Windows, such as Windows XP, you automatically had administrator-level access at all times. This, by itself, was not a problem because recommended good practice was that people logged on with accounts that were members of the local administrator group only when they needed to do something related to administration. The problem with this is that people tended to use their administrator account as their normal user account. It was convenient for them because they did not have to log off and log on again each time they wanted to do something related to systems administration. Unfortunately, this behavior presented a security problem because any program run by a user logged on with an administrative account runs with the rights and privileges of that user. UAC resolves this problem by allowing a user that is a member of the local Administrators group to run as a standard user most of the time and to briefly elevate their privileges so that they are running as administrators when they attempt to carry out specific administration-related tasks.Privilege elevationAll users of clients running Windows 7 run with the rights of a standard user. When a user attempts an act that requires administrative privileges, such as creating a new user account, her rights need to be raised from those of a standard user to those of an administrative user. This increase in rights is termed privilege elevation. UAC is a gateway to privilege elevation. It allows users who are members of the local Administrators group to access administrative rights, but ensures that the person accessing the Administrative rights is aware that they are doing so. This privilege elevation occurs only for a specific task. Another task executed at the same time that also requires privilege elevation generates its own UAC
Q38. - (Topic 2)
You have a computer that runs windows 7.
The computer is configured as shown in the following table.
You plan to install a new application that requires 40 GB of space. The application will be installed to C:app1.
You need to provide 40 GB of free space for the application.
What should you do?
A. Create a shortcut.
B. Create hard link.
C. Create a mount point.
D. Change the quota settings.
Answer: C
Explanation:
Assign a mount point folder path to a driveYou can use Disk Management to assign a mount-point folder path (rather than a drive letter) to the drive. Mount-point folder paths are available only on empty folders on basic or dynamic NTFS volumes.Volume Mount PointsVolume mount points are new system objects in the internal namespace of Windows 2000 that represent storage volumes in a persistent, robust manner. This feature allows multiple disk volumes to be linked into a single tree, similar to the way Dfs links remote network shares. You can have many disk volumes linked together, with only a single drive letter pointing to the root volume. The combination of an NTFS junction and a Windows 2000 volume mount point can be used to graft multiple volumes into the namespace of a host NTFS volume. Windows 2000 offers this new mounting feature as an alternative to drive letters so system administrators can transcend the 26-drive letter limit that exists in Windows NT. Volume mount points are robust against system changes that occur when devices are added or removed from a computer. Important-icon Important A volume is a self-contained unit of storage administered by a file system. The file system that administers the storage in a volume defines a namespace for the volume. A volume mount point is a directory name in an NTFS file system that denotes the root of an arbitrary volume. A volume mount point can be placed in any empty directory of the namespace of the containing NTFS volume. Because volumes can be denoted by arbitrary directory names, they are not required to have a traditional drive letter. Placing a volume mount point on an NTFS directory causes the storage subsystem to resolve the directory to a specified local volume. This "mounting" is done transparently and does not require a drive letter to represent the volume. A Windows 2000 mount point always resolves to the root directory of the desired volume. Volume mount points require that the version of NTFS included with Windows 2000 be used because they are based on NTFS reparse points.
Q39. - (Topic 2)
You have a computer that runs Windows 7 and Windows Internet Explorer 8. You discover that your browsing history is sent to a third-party advertising content provider. You need to prevent the browsing history from being sent only to that specific content provider. What should you do?
A. Enable InPrivate Filtering and click Automatically block.
B. Add the Web site for the content provider to the Restricted sites zone.
C. Enable InPrivate Filtering and select the Choose content to block or allow option.
D. View the privacy policy for the Web site and enable the Never allow this site to use cookies option.
Answer: C
Q40. - (Topic 4)
A company has client computers that run Windows 7 Enterprise.
A user has saved files in a C:Users folder that coworkers must be able to read and edit.
However, when coworkers try to edit those files, they get an "Access Denied" error.
You need to configure new NTFS permissions for the user's C:Users folder to ensure that the coworkers have access to write to that folder.
Which two choices should you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. share permissions
B. the folder Properties window
C. the User Account Control Settings Control Panel window
D. the Group Policy management console
E. the Services management console
F. Local Users and Groups
G. the netsh command
H. Device Manager
I. the icacls command
Answer: B,I