Microsoft 70-698 Dumps 2021

NEW QUESTION 1
You use a Windows 8.1 tablet. The tablet receives Windows Update updates automatically from the Internet. The tablet has Wi-Fi and is connected to a 3G mobile broadband Wi-Fi hot spot.
You need to minimize data usage while connected to this hot spot. What should you do?

• A. Turn on Airplane Mode.
• B. Disable File and Print Sharing for mobile broadband connections.
• C. Configure the interface metric of IP settings for Wi-Fi connection as1.
• D. Edit the Inbound Rule of Windows Firewall, and then disable Internet Control Message Protocol (ICMP) traffic.
• E. Configure the broadband connection as a metered network.

Answer: E

Explanation: You can limit the bandwidth used by the broadband connection by configuring it as a metered network. A metered network is a network where data downloaded is ‘metered’(measured) and you are charged for the amount of data downloaded.
Setting a connection as metered prevents Windows from automatically using bandwidth in a number of ways including the following:
Disables automatic downloading of Windows updates: Windows won’t automatically download updates from Windows Update on metered Internet connections. You’ll get a “Download” button you can click whenever you want to install updates.
Disables automatic downloading of app updates: The Windows Store won’t automatically download updates for your installed “Store apps” on metered connections, either. Desktop apps like Chrome, Firefox, and others will continue updating themselves normally.
Tiles may not update: Microsoft says that the live tiles on your Start menu or Start screen “may” stop updating on a metered connection:

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2. User1 fails to remotely manage the devices on Computer2 by using Device Manager on Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can disable a device on Computer2 remotely.
Solution: You enable the Allow remote access to the Plug and Play interface Group Policy setting on Computer2.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: http://winintro.com/?Category=Windows_10_2021
&Policy=Microsoft.Policies.DeviceInstallation%3A%3ADeviceManagement_RPCInterface_Allow

NEW QUESTION 3
You administer a Windows 10 Enterprise computer. The computer has File History turned on, and system protection turned on for drive C.
You accidentally delete a folder named LibrariesCustomers by using the Shift+Delete keyboard shortcut. You need to restore the most recent version of the folder to its original location.
Which approach should you use to restore the folder?

• A. Recycle Bin
• B. the latest restore point
• C. File History
• D. a manually selected restore point

Answer: C

Explanation: File History is similar to Previous Versions in previous versions of Windows. It takes regular backups of your data and saves them to a separate disk volume or external drive. When File History is enabled, it backs up all the system libraries and your custom libraries by default.
To restore a deleted folder, you can browse to the parent folder or library and select Restore Previous Versions. The Previous Versions tab will list the previous versions that can be restored to its original location or restored to an alternative location.

NEW QUESTION 4
Your company uses a Window Store for Business that contains an app named App1. You have three computers that are prevented from accessing the Internet.
You need to distribute App1 to the three computers.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. a provisioning package created by using Windows Imaging and Configuration Designer
• B. A deployment from Microsoft Intune.
• C. A deployment from Windows Deployment Services (WDS)
• D. an AppX package deployed by using Deployment Imaging Servicing and Management (DISM)
• E. an answer file created by using Windows System Image Manager (Windows SIM)

Answer: DE

Explanation: https://technet.microsoft.com/en-us/itpro/windows/deploy/windows-deployment-scenarios-and-tools

NEW QUESTION 5
company manages Windows 8.1 Pro and Windows 10 Pro client devices by using Group Policy objects (GPOs). The company plans to migrate from GPOs to mobile device management (MDM) policies.
You need to create an HTML report of the GPO settings that are cross-referenced with supported MDM policies.
Solution: You run DISM on the client computers and generate a report. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 6
You have a reference computer named Computer1 that runs Windows 10. You plan to run sysprep.exe several times on Computer1.
You need to prevent the Windows Product Activation clock from being reset on Computer1. What should you do?

• A. Set the ProductKey option in Sysprep.inf to XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
• B. Set the SkipRearm option in Unattend.xml to 0.
• C. Set the ProductKey option in Sysprep.inf to 00000-00000-00000-00000-00000
• D. Set the SkipRearm option in Unattend.xml to 1.

Answer: D

Explanation: SkipRearm is a registry entry which specifies whether to run the Windows Software Licensing Rearm program. Rearming a computer restores Windows Vista and later, to the original licensing state. All licensing and registry data related to activation is either removed or reset. Any grace period timers are reset as well.
0 : Specifies that the computer will be rearmed & any grace period timers will be reset
1 : Specifies that the computer will not be rearmed & grace period timers will not be reset. References:
https://www.thewindowsclub.com/legally-use-windows-without-activating

NEW QUESTION 7
You are the administrator for a company. All devices run Windows 10 Enterprise.
Client Hyper-V is enabled on some devices. You need to verify how the Hyper-V settings are configured for a specific virtual machine (VM) on one of the devices.

Use the drop-down menus to select the answer choice that answers each question. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/checkpoints https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/dn2822

NEW QUESTION 8
You are the administrator for a company. All devices run Windows 10 Enterprise. Users report that their Windows 10 systems are taking longer than normal to boot up.
You need to configure the Windows 10 systems to record the processes and services that are loaded and running during the boot process.
What should you do?

• A. Use the Task Manager tool to enable a boot log.
• B. Use the Task Manager Startup tab to list the process and services that run at startup.
• C. Use the Task Manager Services tab to list the services that start at boot.
• D. Use the System Configuration tool to enable a boot log.

Answer: D

Explanation: References: https://winaero.com/blog/enable-boot-log-windows-10/

NEW QUESTION 9
You run the Get-Service cmdlet and you receive the following output:

You need to identify what occurs when the status of the services changes.
What should you identify? To answer, select the appropriate options in the answer area.

You need to identify what occurs when the status of the services changes.
What should you identify? To answer, select the appropriate options in the answer area.

Answer:

Explanation: *Box 1* starts
*Box 2* remains stopped
*Box 3* remains stopped
https://msdn.microsoft.com/en-us/library/system.serviceprocess.servicecontroller.servicesdependedon(v=vs.110

NEW QUESTION 10
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2.
User1 fails to access the Event Viewer logs on Computer2 from Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can use Event Viewer on Computer1 to remotely view the Event Viewer logs on Computer2.
Solution: You run winrm quickconfig on Computer2. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx

NEW QUESTION 11
Your network contains a single Active Directory domain named contoso.com. In contoso.com, you create an organizational unit (OU) named OU1.
You need to use a provisioning package to perform the following:
Configure the computer names as “Station”, followed by a random three-digit number.
Join the computers to contoso.com, and then create an account for the computers in OU1.
How should you configure the provisioning package? To answer, select the appropriate options in the answer area.

Answer:

Explanation: *Box 1*
OU=OU1, DC=contoso, DC=com
*Box 2* Station%RAND:3%
https://technet.microsoft.com/en-us/itpro/windows/deploy/provision-pcs-for-initial-deployment

NEW QUESTION 12
You have a computer named Computer1 that runs Windows 10.
On Computer1, C:Folder1 has the permissions configured as shown in the following table. You share C:Folder1 as Folder1 and you grant access to the Everyone group.
Folder1 has the following share settings:

What level of access does User1 have to Folder1?

• A. User1 cannot see the Folder1 share on the network and cannot connect to Folder1.
• B. User1can see the Folder1 share on the network and can connect to Folder1.
• C. User1 cannot see the Folder1 share on the network but can connect to Folder1.
• D. User1 can see the Folder1 share on the network but cannot connect to Folder1.

Answer: B

NEW QUESTION 13
Note: This question is part of a series of a questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has storage configured as shown in the following table.

Pool1 contains a storage space named Space1 that is 300 GB. Pool3 contains a storage space named Space2 that is 100 GB. Pool2 is empty. Disk8 fails.
You add a new disk named Disk9 to Pool3. You need to remove Disk8 from Pool3. What should you use?

• A. Add-PhysicalDisk
• B. Diskpart
• C. New-VirtualDisk
• D. Remove-PhysicalDisk
• E. Resize-VirtualDisk
• F. Set-StoragePool
• G. Subst
• H. Update-Disk

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn782852(v=ws.11).aspx#BKMK_Step6RemoveOldDisk

NEW QUESTION 14
A user has a laptop named Computer 1 that runs Windows 10 and has a 64-bit application named App1 installed.
App1 fails to launch and generates an error message indicating that the application is not supported on this version of Windows.
You need to ensure that App1 can run successfully. What should you do?

• A. Create a package that includes App1 by using the Windows Imaging and Configuration Designer (Windows ICD).
• B. Create a fix in the Compatibility Administrator.
• C. Run App1 in the Standard User Analyzer (SUA).
• D. Use the Application Compatibility Manager (ACM) to create aninventory package.

Answer: B

Explanation: https://msdn.microsoft.com/en-us/library/windows/desktop/dd744763(v=vs.85).aspx

NEW QUESTION 15
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has a dual-boot configuration. Computer1 has Windows 8.1 and Windows 10 installed.
You need to configure Computer1 to use only 4 GB of RAM when the computer starts in Windows 10. What should you run?

• A. Add-WindowsImage
• B. bcdboot.exe
• C. bcdedit.exe
• D. bootcfg.exe
• E. bootim.exe
• F. bootsect.exe
• G. diskpart.exe
• H. Expand-WindowsImage

Answer: C

Explanation: https://technet.microsoft.com/en-us/library/cc709667(v=ws.10).aspx

NEW QUESTION 16
You are the system administrator for a company. All devices run Windows 10 Enterprise. You have an on-premises Active Directory Domain Services (AD DS) domain as well as a Microsoft Azure Active Directory (Azure AD) environment.
Your on-premises Active Directory infrastructure consists of the following:
Windows Server 2012 R2 domain controllers
Windows Server 2012 domain/forest functional level
Windows Server 2012 Certificate Authority
You are planning a hybrid deployment of Windows Hello for Business.
You need to determine which deployment options are available for your environment.
Which two deployment options can you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

• A. Key trust Group Policy managed
• B. Key trust Modern managed
• C. Certificate trust Modern managed
• D. Certificate trust Mixed managed

Answer: BC

Explanation: References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/hello-for-business/hello-hybrid-key-trust- https://docs.microsoft.com/en-us/windows/security/identity-protection/hello-for-business/hello-hybrid-cert-trust- https://docs.microsoft.com/en-us/windows/security/identity-protection/hello-for-business/hello-planning-guide

NEW QUESTION 17
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains a VPN server that supports all of the VPN protocols.
A user named User1 works from home and has a desktop computer that runs Windows 10 Pro. User1 has an application named App1 that requires access to a server on the corporate network. User1 creates a VPN connection on the computer.
You need to ensure that when User1 opens App1, App1 can access the required data. What should you do?

• A. Click Turn on password protected sharing.
• B. Disable Network Discovery.
• C. Modify the Profile settings of an incoming firewall rule.
• D. Run the Add-VpnConnectionTriggerApplication cmdlet.
• E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
• F. Run the New-VpnConnection cmdlet.
• G. Run the Set-NetConnectionProfile cmdlet.
• H. Run the Set-VPNConnection cmdlet.

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dn296460(v=wps.630).aspx

NEW QUESTION 18
You are the desktop administrator for a company. You plan to deploy a new custom application named App1. All employees must be able to find and install the application. Users who are not employees must not be able to find or install the application.
You need to configure access for App1. What should you do?

• A. Allow access to the Microsoft Store and publish App1.
• B. Run the Publish-Module Windows PowerShell cmdlet.
• C. Implement Microsoft Store for Business and publish App1.
• D. Run the Publish-BCWebContent Windows PowerShell cmdlet.

Answer: C