The Secret Of EMC DES-6322 Simulations

NEW QUESTION 1
From what location should NVT for VxRail be run?

• A. Jump server on a different network
• B. Workstation on the same network as VxRail Manager
• C. VxRail network Top of Rack switch
• D. Laptop connected to the first VxRail ESXi node

Answer: B

NEW QUESTION 2
What are the requirements for a customer-supplied VDS in a VxRail deployment?

• A. 4 or 8 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• B. 2 or 4 uplinksPort groups for Discovery, Management, vMotion, and vSAN only
• C. 2 or 4 uplinksPort groups for Discovery, Management vCenter Server, vMotion, and vSAN
• D. 4 or 8 uplinksPort groups for Discovery, Management, vCenter Server, vMotion, and vSAN

Answer: D

NEW QUESTION 3
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?

• A. Set the port type to edge
• B. Enable link aggregation for all ports
• C. Set the port mode to access
• D. Enable MLD snooping and querier

Answer: A

NEW QUESTION 4
Match each VxRail configuration with its related characteristic.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
A company has multiple VxRail systems installed at geographically dispersed data centers They want to upgrade all their VxRail systems to the latest release- Before the upgrade, they want an inventory report of all the VxRail systems which shows the current health status and versions of all installed VxRail components.
What should be used to meet these requirements?

• A. MitrendVxRail Log insight
• B. VxRail Plugin for vCenter Server DRM Services
• C. itrendLive Optics
• D. VxRail Plugin for vCenter Server VxRail API

Answer: A

NEW QUESTION 6
A VxRail Manager VM must be configured as follows:
* IP address: 192 168.10.16
* Net mask: 255.255.255.0
* Gateway: 192 168 10 254 Which command must be used?

• A. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254
• B. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254
• C. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 -vxrail-gateway 192.168,10 254
• D. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 --vxrail-gateway 192.168.10.254

Answer: C

NEW QUESTION 7
An implementation engineer is configuring External SRS. Where can they find the installation files for SRS VE?

• A. VxRail Support Matrix
• B. VxRail Manager
• C. SolVe Online
• D. Dell Support Page

Answer: B

NEW QUESTION 8
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

• A. PCIe network card must be added to all nodes
• B. Node requires only the same drive configuration
• C. Node hardware must be identical to the other three nodes
• D. New node must be at the same VxRail version as existing nodes

Answer: B

NEW QUESTION 9
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.
What action does the engineer need to perform on each host once the upgrade has been completed?

• A. From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host
• B. From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them
• C. Set the InstantClone Maintenance annotation value to the original value
• D. Set the InstantClone Maintenance annotation value to 2

Answer: A

NEW QUESTION 10
According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

• A. VxRail vCenter Server Planning Guide Network Validation Tool
• B. VxRail vCenter Server Planning Guide VxRail Network Planning Guide
• C. VxRail QuickStart Guide VxRail Network Planning Guide
• D. VxRail QuickStart Guide Network Validation Tool

Answer: D

NEW QUESTION 11
A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12
An implementation engineer needs to validate the VxRail network configuration. Where can they obtain the NVT for VxRail?

• A. Dell Technologies Central
• B. Dell Technologies Information Hub
• C. Dell VxRail Expert Channel
• D. Dell VxRail Fast Pass

Answer: A

NEW QUESTION 13
What is the correct CLI command to collect only the vCenter logs on VxRail Manager

• A. vc-support.sh –v
• B. generateFullBundle.py –v
• C. vc-support-bundle.sh –c
• D. generateLogBundle.py –c

Answer: D

NEW QUESTION 14
A planned VxRail Stretched Cluster will have four hybrid nodes at each site. What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?

• A. Site disaster tolerance – None keep data on Preferred (stretched cluster) Failures to tolerate – 1 failure – RAID-1 (Mirroring)
• B. Site disaster tolerance – Dual site mirroring (stretched cluster) Failures to tolerate – 1 failure – RAID-5 (Erasure Coding)
• C. Site disaster tolerance – Dual site mirroring (stretched cluster) Failures to tolerate – No data redundancy
• D. Site disaster tolerance – Dual site mirroring (stretched cluster)Failures to tolerate – 1 failure – RAID-1 (Mirroring)

Answer: B

NEW QUESTION 15
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-6 (Erasure Coding)?

• A. 4
• B. 5
• C. 6
• D. 7

Answer: C

NEW QUESTION 16
......