All of our own Juniper JN0-633 exam questions and answers are usually given the careful revision. Nearly all of the test-takers that have got through the JN0-633 exam speak highly of our own Juniper training materials. So, you can believe in our Juniper JN0-633 products. Obviously, you can claim your current full cash back should you fail in the Juniper Juniper check. If you encounter any troubles during the studying, you can talk to our on-line help. Your satisfaction and success is our own main objective. Thanks to your attention.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Juniper JN0-633 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW JN0-633 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/JN0-633-exam-dumps.html

2021 Apr JN0-633 free practice exam

Q71. What is a benefit of using a dynamic VPN?

A. It provides a layer of redundancy on top of a point-to-point VPN mesh architecture.

B. It eliminates the need for point-to-point VPN tunnels.

C. It provides a way to grant VPN access on a per-user-group basis.

D. It simplifies IPsec access for remote clients.

Answer: D

Explanation: Reference:http://tutarticle.com/networking/benefits-of-dynamic-multipoint-vpn-dmvpn/


Q72. Your company is providing multi-tenant security services on an SRX5800 cluster. You have been asked to create a new logical system (LSYS) for a customer. The customer must be able to access and manage new resources within their LSYS.

How do you accomplish this goal?

A. Create the new LSYS, allocate resources, and then create the user administrator role so that the customer can manage their allocated resources.

B. Create the new LSYS, and then create the user administrator role so that the customer can allocate and manage resources.

C. Create the new LSYS, and then create the master adminstrator role for the LSYS so that the customer can allocate and manage resources.

D. Create the new LSYS, then request the required resources from the customer, and create the required resources.

Answer: A

Explanation:

Reference

http://www.juniper.net/techpubs/en_US/junos12.1/topics/task/configuration/logical-system-security-user-lsys-overview-configuring.html


Q73. You are asked to configure class of service (CoS) on an SRX device running in transparent mode. Which command would you use?

A. set interfaces ge-0/0/0 unit 0 classifiers dscp priority-app

B. set class-of-service interfaces ge-0/0/0 unit 0 classifiers dscp priority-app

C. set class-of-service interfaces ge-0/0/0 unit 0 classifiers ieee-802.1 priority-app

D. set interfaces ge-0/0/0 unit 0 classifiers inet-precedence priority-app

Answer: C

Explanation: Reference: http://kb.juniper.net/InfoCenter/index?page=content&id=KB23234


Q74. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

Referring to the exhibit, the session close log was generated by the application firewall rule set HTTP.

Why did the session close?

A. The application identification engine was unable to determine which application was in use, which caused the SRX device to close the session.

B. The host with the IP address of 192.168.1.123 received a TCP segment with the FIN flag set from the host with the IP address of 65.197.244.218.

C. The SRX device was unable to determine the user and role in the allotted time, which caused the session to close.

D. The host with the IP address of 192.168.1.123 sent a TCP segment with the FIN flag set to the host with the IP address of 65.197.244.218.

Answer: D 

Explanation: 

Reference:http://netscreen.com/techpubs/software/junos/junos92/syslog- messages/download/rt.pdf


Q75. You are asked to allow access to an external application for an internal host subject to address translation. The application requires multiple sessions initiated from the internal host and expects all the sessions to originate from the same source IP address.

Which Junos feature meets this objective?

A. destination NAT with address persistence

B. source NAT with address persistence

C. static NAT with port translation

D. interface-based persistent NAT

Answer: B


Refresh JN0-633 latest exam:

Q76. A branch SRX Series device in flow mode is forwarding between two virtual routers using a paired set of logical tunnel interfaces. You have a server connected to one virtual router and the client is on the other virtual router.

How many security policies are needed to connect from the client to the server across the logical tunnel link?

A. 0

B. 2

C. 3

D. 1

Answer: D


Q77. Click the Exhibit button.

[edit protocols ospf area 0.0.0.0]

user@host# run show security ike security-associations Index State Initiator cookie Responder cookie Mode Remote Address

3289542 UP 48d928408940de28 e418fc7702fe483b Main

172.31.50.1

3289543 UP eb45940484082b14 428086b100427326 Main 10.10.50.1

[edit protocols ospf area 0.0.0.0]

user@host# run show security ipsec; security-associations Total active tunnels: 2

ID Algorithm SPI Life:sec/kb Mon lsys Port Gateway

<131073 ESP:des/ shal 6d40899b 1360/ unlim - root 500 10.10.50.1

>131073 ESP:des/ shal 5a89400e 1360/ unlim - root 500 10.10.50.1

<131074 ESP:des/ shal c04046f 1359/ unlim - root 500 172.31.50.1

>131074 ESP:des/ shal 5508946c 1359/ unlim - root 500 172.31.50.1

[edit protocols ospf area 0.0.0.0] user@host# run show ospf neighbor

Address Interface State ID Pri Dead 10.40.60.1 st0.0 Init 10.30.50.1 128 35

10.40.60.2 st0.0 Full 10.30.50.1 128 31

[edit protocols ospf area 0.0.0.0] user@host# show

interface st0.0;

You have already configured a hub-and-spoke VPN with one hub device and two spoke devices. However, the hub device has one neighbor in the Init state and one neighbor in the Full state.

What would you do to resolve this problem?

A. Configure the st0.0 interface under OSPF as a nonbroadcast multiple access interface.

B. Configure the st0.0 interface under OSPF as a point-to-multipoint interface.

C. Configure the st0.0 interface under OSPF as a point-to-point interface.

D. Configure the st0.0 interface under OSPF as an unnumbered interface.

Answer: B


Q78. You have installed a new IPS license on your SRX device and successfully downloaded the attack signature database. However, when you run the command to install the database, the database fails to install.What are two reasons for the failure? (Choose two.)

A. The file system on the SRX device has insufficient free space to install the database.

B. The downloaded signature database is corrupt.

C. The previous version of the database must be uninstalled first.

D. The SRX device does not have the high memory option installed.

Answer: A,B

Explanation:

We don’t need to uninstall the previous version to install a new license, as we can update the same. Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB16491. Also high memory option is licensed feature.

The only reason for failure is either there is no space left or downloaded file is corrupted due to incomplete download because of internet termination in between. Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB23359


Q79. HostA (1.1.1.1) is sending TCP traffic to HostB (2.2.2.2). You need to capture the TCP packets locally on the SRX240. Which configuration would you use to enable this capture?

A. [edit security flow] user@srx# show traceoptions {

file dump;

flag basic-datapath;

}

B. [edit security] user@srx# show application-tracking { enable;

}

flow { traceoptions { file dump;

flag basic-datapath;

}

}

C. [edit firewall filter capture term one] user@srx# show

from {

source-address { 1.1.1.1;

}

destination-address { 2.2.2.2;

}

protocol tcp;

}

then {

port-mirror; accept;

}

D. [edit firewall filter capture term one] user@srx# show

from {

source-address { 1.1.1.1;

}

destination-address { 2.2.2.2;

}

protocol tcp;

}

then { sample; accept;

}

Answer: D

Explanation: Reference:http://khurramkhalid.wordpress.com/2012/05/22/packet-capture-on-srx-devices/


Q80. What are two intrusion protection mechanisms available on SRX Series Services Gateways? (Choose two.)

A. routing update detection

B. traffic anomaly detection

C. NAT anomaly protection

D. DoS protection

Answer: B,D

Explanation:

Juniper IPS system prevents Traffic Anamoly detection and DoS/DDoS attacks. Reference: http://www.juniper.net/in/en/products-services/software/router-services/ips/