Update NS0-513 Preparation 2021

NEW QUESTION 1
You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s. How are the high-availability interconnects cabled?

• A. High-availability interconnects are only needed for the remote connections between the nodes.
• B. High-availability interconnects are cabled both locally and remotely between the nodes.
• C. High-availability interconnects between the nodes are not needed.
• D. Each high-availability pair controller is cabled to its local partner.

Answer: B

NEW QUESTION 2
You must determine if there have been any backup problems overnight. Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?
(Choose two.)

• A. Unresolved Incidents and Risks area
• B. On Command Unified Manager Dashboard
• C. On Command Cluster Events Details
• D. On Command Job Events Details

Answer: BD

NEW QUESTION 3
Beginning with On Command Workflow Automation 3.0, which feature allows you to download and manage your WFA workflow packs from the NetApp resources.

• A. Workflow Automation External Data Sources
• B. Workflow Automation Database
• C. Storage Automation Store
• D. Workflow Automation Community

Answer: C

NEW QUESTION 4
You are using SnapLock for SnapVault to protect Snapshot copies on secondary storage. In ONTAP 9.3, which source aggregate feature is supported in this scenario?

• A. SnapLock Enterprise
• B. SnapLock Compliance
• C. 32 bit
• D. RAID-TEC

Answer: D

NEW QUESTION 5
A company wants to implement a hybrid cloud backup model for their file services. They want to configure an incremental forever backup that can then push to a public or private cloud.
Which products satisfy this requirement?

• A. FlashPool with AltaVault and OnCommand Cloud Manager
• B. SnapMirror with SnapCenter Software and AltaVault
• C. ONTAP with FlexGroup and OnCommand Unified Manager
• D. System Manager with Cloud Sync and NetApp Volume Encryption

Answer: B

NEW QUESTION 6
Your customer has issued the metrocluster heal command. Which two statements are true regarding this command?
(Choose two.)

• A. The customer has replaced failed disks in one of the cluster nodes.
• B. The customer has to run the command twice.
• C. The customer has one node in the site down and wants to heal the cluster.
• D. The customer is preparing for a disaster recovery switchback.

Answer: AD

NEW QUESTION 7
After manually implementing a SnapVault relationship between two volumes on two separate clusters, the primary Snapshot copies are working fine. The baseline has been transferred successfully. The relationship is shown as healthy and idle.
However, the updates are not taking place as scheduled on the secondary system. What is causing the problem?

• A. The Snapshot copy label has not been set correctly in the used SnapMirror policy.
• B. The SnapMirror policy schedule has not been enabled.
• C. The SnapMirror access has not been configured.
• D. The cluster peering has not been set properly.

Answer: A

NEW QUESTION 8
In a clustered Data ONTAP environment, the customer is using SnapVault to back up data from a primary to a secondary cluster.
Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6. OnCommand Workflow Automation takes care of the secondary provisioning. The customer wants to update the SnapMirror Policy with a custom Snapshot copy label.
What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?

• A. Add the SnapMirror label in the efficiency policy of the secondary system.
• B. Re-initialize the SnapMirror relationship and transfer a new baseline.
• C. Add the SnapMirror label in the SnapMirror policy of the secondary system.
• D. Re-initialize the SnapMirror relationship without transferring a new baseline.

Answer: D

NEW QUESTION 9
What are two reasons why the status of the SnapMirror relationship is showing ~Healthy: false~? (Choose two.)

• A. A manual update has failed.
• B. It has missed a scheduled transfer.
• C. The lag time has exceeded the threshold.
• D. A transfer operation is in progress.

Answer: AB

NEW QUESTION 10
Your customer is concerned that his volume might run out of space. Which two volume command options would be used to resolve this problem?
(Choose two.)

• A. snapshot autodelete
• B. autosize
• C. space-guarantee
• D. filesystem-size-fixed

Answer: AB

NEW QUESTION 11
A customer wants to modify the retention count of the SnapVault destination volume. Which policy should be used modify the attribute?

• A. Snapshot policy
• B. Volume policy
• C. SnapMirror policy
• D. Efficiency policy

Answer: C

NEW QUESTION 12
You want to generate performance-related reports and alerts using the OnCommand Unified Manager 6.x server. Which two additional tasks must be completed to enable these features?
(Choose two.)

• A. Create a local user with limited Event Publisher role privileges
• B. Install and configure OnCommand Workflow Automation.
• C. Configure a connection between the Unified Manager server and OnCommand System Manager.
• D. Configure a connection between the Unified Manager server and a Performance Manager server.

Answer: AD

NEW QUESTION 13
Management wants the ability to transfer more data over a low bandwidth network connection. Which action would satisfy the request?

• A. Enable version flexible replication with a SnapMirror policy.
• B. Enable network compression with a SnapMirror policy.
• C. Disable throttle with a SnapMirror policy.
• D. Modify the SnapMirror schedules.

Answer: B

NEW QUESTION 14
What is a NetApp Snapshot copy?

• A. a SnapVault target
• B. a read-only copy of a FlexVol
• C. a SnapMirror destination volume
• D. a SnapProtectMediaAgent

Answer: B

NEW QUESTION 15
You have deployed a 4-node fabric MetroCluster configuration for cross-site disaster-recovery protection. In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation?
(Choose two.)

• A. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
• B. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
• C. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.
• D. AUSO is enabled by default on a MetroCluster cluster.

Answer: AD

NEW QUESTION 16
A customer is running clustered Data ONTAP and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore -file-list.
Which two statements are true about this operation? (Choose two.)

• A. The maximum number of files that you can select at the same time is one.
• B. The maximum number of files that you can select at the same time is eight.
• C. You can choose any destination volume for the restore, as long as the volume type is RW.
• D. You can choose any destination volume for the restore, as long as the volume type is DP.

Answer: BD

NEW QUESTION 17
You have a network outage that affects client access to site

• A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site
• B. Which two steps must you perform first?(Choose two.) Response:
• C. Take the source volume offline.
• D. Break the SnapMirror relationship.
• E. Delete the SnapMirror relationship.
• F. Abort the SnapMirror relationship.

Answer: AB

NEW QUESTION 18
Click the Exhibit button on the right.

Referring to the exhibit, which two tiers are monitored in the volume capacity? (Choose two)

• A. metadata
• B. licensed
• C. capacity
• D. performance

Answer: CD

NEW QUESTION 19
In which two scenarios would a SnapMirror policy be applied? (Choose two.)
Response:

• A. a log file
• B. a storage virtual machine
• C. a data protection mirror relationship
• D. a SnapVault relationship

Answer: CD

NEW QUESTION 20
Which clustered Data ONTAP technology replicates only the changed blocks of a volume for pointin- time restores?

• A. NDMP copy
• B. FlexClone volume clone
• C. Snapshot copies
• D. SnapVault replication

Answer: C

NEW QUESTION 21
You want to ensure that a particular version of SnapManager for SQL is supported in a configuration. Which three components need to be verified in the Interoperability Matrix?
(Choose three.)

• A. On Command Unified Manager version
• B. SnapDrive version
• C. FC HBA firmware
• D. SnapManager version
• E. Data ONTAP version

Answer: BDE

NEW QUESTION 22
A customer wants to convert some SnapMirror relationships to SnapVault relationships. How would this be accomplished without creating a new baseline?
Response:

• A. Break and delete the relationship followed by SnapMirror resync.
• B. Break the relationship followed by SnapMirror delete.
• C. Break and delete the relationship followed by SnapMirror resync with relationship type XDP.
• D. Break the relationship followed by SnapMirror modify.

Answer: D

NEW QUESTION 23
A Windows user requests assistance to restore a file on a CIFS share that they have mistakenly deleted. Which tool would restore the deleted file?

• A. Windows Shadow Copy Client
• B. OnCommand Unified Manager
• C. OnCommand Systems Manager
• D. Windows Unified Host Utilities

Answer: A

NEW QUESTION 24
What are two NetApp data protection solutions? (Choose two.)

• A. RecoverPoint
• B. SnapMirror
• C. TimeFinder
• D. SnapVault

Answer: BD

NEW QUESTION 25
You want to replicate data from ONTAP to NetApp Cloud Backup (formerly AltaVault).
To prevent a conflict with another backup application, you need to update the policy that contains the backup schedule so that the backup runs at a different time of day.
Which product would accomplish this task?
Response:

• A. OnCommand Unified Manager
• B. OnCommand System Manager
• C. OnCommand Insight
• D. Commvault IntelliSnap

Answer: B

NEW QUESTION 26
......