Act now and download your today! Do not waste time for the worthless tutorials. Download with real questions and answers and begin to learn with a classic professional.

Also have 2V0-622D free dumps questions for you:

NEW QUESTION 1
A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?

  • A. CPU and Memory capacity will be set to 25%.
  • B. CPU and Memory capacity will be set to 50%.
  • C. CPU and Memory capacity will be set to 20%.
  • D. CPU and Memory capacity will be set to 30%.

Answer: C

Explanation: Select the Percentage of Cluster Resources Reserved admission control policy. This policy offers the most flexibility in terms of host and virtual machine sizing. When configuring this policy, choose a percentage for CPU and memory that reflects the number of host failures you want to support. For example, if you want vSphere HA to set aside resources for two host failures and have ten hosts of equal capacity in the cluster, then specify 20%

NEW QUESTION 2
When using DPM in a vSphere HA cluster with Admission Control enabled, which two statements are true? (Choose two.)

  • A. DPM cannot be enabled on a cluster with HA Admission control enabled.
  • B. If necessary, DPM powers on hosts from standby mode to maintain failover needs.
  • C. EVC must be enabled on the cluster before DPM can be enabled.
  • D. DPM and HA do not interact with each othe
  • E. There will be no change in behavior when DPM is enabled on a cluster using HA.
  • F. DPM does not place hosts in standby mode if doing so would violate failover requirements.

Answer: BE

NEW QUESTION 3
Which two storage technologies are supported for MSCS? (Choose two.)

  • A. VAAI
  • B. NFS
  • C. iSCSI
  • D. FC

Answer: CD

Explanation: https://kb.vmware.com/s/article/2147661?other.KM_Utility.getArticleLanguage=1&r=1&other.KM_Utility.getA

NEW QUESTION 4
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)

  • A. Auto Deploy can be configured and managed via PowerCLI.
  • B. Auto Deploy can be configured and managed via the vSphere Client.
  • C. Auto Deploy can be configured and managed via the vSphere Web Client.
  • D. Auto Deploy can be configured and managed via vCLI commands.

Answer: AC

NEW QUESTION 5
An ESXi host’s VMCA-Signed certificate has expired. How can the certificate be renewed?

  • A. In the vSphere Web Client, browse to the host in questio
  • B. Click the Manage tab and select settings.Select System and click Certificate, then click the Renew button.
  • C. In the vSphere Web Client, browse to the host in questio
  • D. Click the Manage tab and select settings.Select System and click Certificate, then click the Refresh CACertificates button.
  • E. Run the command /sbin/generate-certificates on the affected host.
  • F. Disconnect the host from vCenter Server and reconnect it.

Answer: D

Explanation: You can renew your certificates when they are about to expire, or if you want to provision the host with a new certificate for other reasons. If the certificate is already expired, you must disconnect the host and reconnect it.

NEW QUESTION 6
An administrator is trying to vMotion a VM from his datacenter to a recovery site.
Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?

  • A. 100 milliseconds
  • B. 150 milliseconds
  • C. 15 milliseconds
  • D. 10 milliseconds

Answer: B

Explanation: Round-Trip Time for Long-Distance vMotion Migration
If you have the proper license applied to your environment, you can perform reliable migrations between hosts that are separated by high network round-trip latency times. The maximum supported network round-trip time for vMotion migrations is 150 milliseconds. This round-trip time (RTT) lets you migrate virtual machines to another geographical location at a longer distance.

NEW QUESTION 7
What is the VMware-recommended best practice for Fibre Channel zoning?

  • A. single-initiator–single-target zoning
  • B. single-initiator-zoning
  • C. single-initiator–multiple-target zoning
  • D. soft zoning

Answer: A

Explanation: With ESXi hosts, use a single-initiator zoning or a single-initiator-single-target zoning. The latter is a preferred zoning practice. Using the more restrictive zoning prevents problems and misconfigurations that can occur on the SAN.

NEW QUESTION 8
It is determined that the Migration Assistant will be used to migrate from vCenter Server 5.5 on Windows with an external instance of Update Manager to a vCenter Server Appliance 6.5.
Which option is correct in regard to migrating Update Manager?

  • A. The Migration Assistant must be run on vCenter Server first and then on the Update Manager server.
  • B. The Migration Assistant must be run on the Update Manager server first and then on vCenter Server.
  • C. Migrating Update Manager from legacy versions of vCenter Server to a vCenter Server Appliance 6.5 is not supported.
  • D. The Migration Assistant can only migrate local instances of Update Manager to the vCenter Server Appliance 6.5.

Answer: B

NEW QUESTION 9
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:
vSphere Distributed Switch MTU supported status
The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?

  • A. Configure the Distributed Switch to MTU 9100.
  • B. Disconnect and reconnect the physical network cable.
  • C. Configure the physical switch to MTU 1600.
  • D. Disable the Distributed Switch MTU.

Answer: C

NEW QUESTION 10
Which are two supported storage primitives for VAAI NAS? (Choose two.)

  • A. block zeroing
  • B. Reserve Space
  • C. hardware assisted locking
  • D. Full File Clone

Answer: AC

NEW QUESTION 11
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)

  • A. VASA
  • B. PSP
  • C. VAAO
  • D. SATP

Answer: BD

NEW QUESTION 12
In a vSphere environment, two resource pools are created as shown in the Exhibit.
2V0-622D dumps exhibit
Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed.
What action in the resource pool settings will allow VM3 to power on successfully?

  • A. Increase Memory Reservation.
  • B. Deselect Expandable Memory Reservation
  • C. Increase the CPU Reservation
  • D. Deselect Expandable CPU Reservation.

Answer: A

NEW QUESTION 13
Virtual machines that are known to run read-intensive applications have begun to underperform. Which action can improve performance?

  • A. Enable vFlash Read Cache.
  • B. Migrate virtual machines to a VMFS6 datastore.
  • C. Ensure that DRS is in manual mode.
  • D. Disable virtual machine encryption.

Answer: A

NEW QUESTION 14
An administrator is trying to remove a host from a vSphere Distributed Switch named DSwitch01. The following error message is displayed:
vDS DSwitch01 port 17 is still on host 192.168.100.23 connected to VM01 nic=4000 type=vmVnic
Which two actions can the administrator make before removing the host from the vSphere Distributed Switch? (Choose two.)

  • A. Migrate VM01 to DSwitch01 port 1.
  • B. Add an additional vNIC to VM01 to another vSphere Distributed Switch.
  • C. Migrate VM01 to another host.
  • D. Disconnect the VM01’s vNIC.
  • E. Place VM01 into Maintenance Mode.

Answer: CD

Explanation: Before removing the host from distributed switch, migrate VM01 to Dswitch01 Port1. Then disconnect VM01 NIC.

NEW QUESTION 15
Which is the minimum vSphere Distributed Switch version needed to support Network Health Check?

  • A. 6.5
  • B. 5.1
  • C. 4.1
  • D. 5.5

Answer: B

NEW QUESTION 16
vSphere Data Protection 6.1 provides the ability to back up and restore individual applications. Which are the three supported applications? (Choose three.)

  • A. Microsoft Dynamics Server
  • B. Oracle Database Server
  • C. Microsoft SharePoint Server
  • D. Microsoft Exchange Server
  • E. Microsoft SQL Server

Answer: CDE

NEW QUESTION 17
Which three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)

  • A. The disk is not listed in the VMware hardware compatibility guide.
  • B. The disk is not detected as local.
  • C. The disk is not detected as an SSD.
  • D. The disk is in use by VMFS.

Answer: BCD

NEW QUESTION 18
DRS is set to Fully-Automated mode and seems to be migrating virtual machines too frequently. Which action can potentially decrease the amount of automated migrations performed by DRS?

  • A. Increase the Migration Threshold by moving the slider to the right.
  • B. Decrease the Migration Threshold by moving the slider to the left.
  • C. Set DRS to Partially-Automated mode.
  • D. Enable EVC for the cluster.

Answer: B

NEW QUESTION 19
When you attempt to open a virtual machine console from the vSphere Web Client, the console does not connect. The following error message appears:
2V0-622D dumps exhibit
Why did not connect?

  • A. Port 443 is in use.
  • B. Port 9443 is in use.
  • C. Port 8443 is in use.
  • D. Port 22443 is in use.

Answer: B

Explanation: Another program or process is using port 9443, the default port used by the HTML5 virtual machine console.

NEW QUESTION 20
A VM-Host affinity rule states that VM group “X” must run on hosts in group “Y”.
If all ESXi hosts in group “Y” fail, which is the resulting behavior with vSphere HA enabled?

  • A. The virtual machines in group “X” will failover to hosts that do not belong to group “Y”, but will vMotion back to hosts in group “Y” when they become available.
  • B. The virtual machines in group “X” will not failover to hosts that do not belong to group “Y”.
  • C. This scenario is not possible because vSphere HA and DRS cannot work together.
  • D. The virtual machines in group “X” will only fail over to hosts that do not belong to group “Y” if they are marked as “High” VM Restart Priority within vSphere HA.

Answer: B

Thanks for reading the newest 2V0-622D exam dumps! We recommend you to try the PREMIUM 2passeasy 2V0-622D dumps in VCE and PDF here: https://www.2passeasy.com/dumps/2V0-622D/ (269 Q&As Dumps)