Cisco 300-075 study guidebook, Pdf exam demos and examination engine will be available at Actualtests once you pay for that fees. Immediate access for you to our Cisco Cisco exam merchandise will be presented for you for you to download on your PC. This can be the quickest and shortest way for you for you to prepare for that actual Cisco exam. Actualtests?¡¥s Cisco 300-075 exam dumps save you a lot of occasion and cash. You can throw apart the lengthy books. Carry the Cisco 300-075 printable Pdf demos along with you to evaluate the theoretical knowledge and practice the actual simulated test in your PC with each of our test engine. Make notes on the blunders every occasion and spare a lot more efforts about the weak aspects in your later preparation until finally you master all the key items of the Cisco Cisco exam.

2021 Feb 300-075 examcollection:

Q111. When an incoming PSTN call arrives at an H.323 gateway, how does the calling number get normalized to a global E.164 number with + prefix in Cisco Unified Communications Manager? 

A. Normalization is done using translation patterns. 

B. Normalization is done using route patterns. 

C. Normalization is done using the gateway incoming called party prefixes based on number type. 

D. Normalization is done using the gateway incoming calling party prefixes based on number type. 

E. Normalization is achieved by local route group that is assigned to the H.323 gateway. 

Answer:


Q112. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

How many route lists and route groups should be configured for AAR at a minimum? 

A. a single route list with a local route group for each site 

B. two route lists and two route groups for each site 

C. a single route list and four route groups for each site 

D. None. The AAR CSS can point directly to the route pattern. 

Answer:


Q113. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

What two tasks must be completed in order to support calls between the VCS controlled endpoints and the Cisco Unified CM endpoints? (Choose two.) 

A. Media Resource Group List. 

B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS. 

C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS. 

D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM. 

E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM. 

Answer: B,D 


Q114. How is a SIP trunk in Cisco Unified Communications Manager configured for SIP precondition? 

A. The configuration is done by selecting a SIP precondition trunk for trunk type. 

B. The configuration is automatically selected when RSVP is enabled for the location assigned to the trunk. 

C. SIP precondition is configured by selecting E2E for RSVP over SIP on the default SIP profile assigned to the SIP trunk. 

D. SIP precondition is configured by configuring a new SIP profile and selecting E2E for RSVP over SIP. The new SIP profile must then be assigned to the SIP trunk. 

Answer:


Q115. In a Centralized Call processing architecture, you have deployed Extension Mobility (EM) feature. After the deployment of EM, when one of the end-users tries to login to the IP phone, the Error 25 is displayed on the screen. What three things should you do to resolve this issue? (Choose three.) 

A. upgrade the firmware of the IP Phone to the latest version 

B. activate EM feature service under Cisco Unified Serviceability 

C. associate EM Device profile with the end-user 

D. subscribe the MAC address of the IP Phone to EM Service 

E. update EM Phone Service URL to point to the publisher 

F. subscribe device profile to EM phone service in case the enterprise subscription of EM Service is disabled 

Answer: B,C,D 


Avant-garde 300-075 cisco press:

Q116. Which task must you perform before deleting a transcoder? 

A. Delete the dependency records. 

B. Unassign it from a media resource group. 

C. Use the Reset option. 

D. Remove the device pool. 

E. Remove the subunit. 

F. Delete the common device configuration. 

Answer:


Q117. When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting apply? 

A. all phones in the cluster that support device mobility 

B. all phones in the cluster that subscribed to device mobility 

C. mobile phones in the cluster that support device mobility 

D. mobile phones in the cluster that are in default mode 

Answer:


Q118. What happens if location-based CAC is used and there is no bandwidth available when a remote caller is placed on hold? 

A. Cisco Unified Communications Manager sends TOH rather than MOH. 

B. Cisco Unified Communications Manager terminates the call. 

C. Cisco Unified Communications Manager plays default MOH. 

D. Cisco Unified Communications Manager attempts to reconnect the call immediately. 

Answer:


Q119. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.) 

A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses. 

B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses. 

C. Create one neighbor zone in VCS for each Unified CM node. 

D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node. 

E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node. 

Answer: A,D 


Q120. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

SRST 

SRST-BR2 Config 

BR2 Config 

SRSTPSTNCall 

After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Device Pool cannot be default. 

B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router. 

C. The router does not support SRST. 

D. The SRST enabled router is not configured correctly. 

Answer: