we provide Highest Quality Cisco 300 075 vce free practice questions which are the best for clearing cisco 300 075 test, and to get certified by Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2). The 300 075 vce Questions & Answers covers all the knowledge points of the real cisco 300 075 exam. Crack your Cisco 300 075 vce Exam with latest dumps, guaranteed!


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-075-exam-dumps.html

Q31. Refer to the exhibit. 

IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.) 

A. Add port 1/0:23 to dial-peer voice 123 pots. 

B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4. 

C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All). 

D. Add the command h323-gateway voip id on interface vlan120. 

E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4. 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html 


Q32. Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder? 

A. Call Control Discovery requesting service 

B. Hosted DNs service 

C. Service Advertisement Framework client control 

D. Cisco Unified Communications Manager database 

E. Service Advertisement Framework-enabled trunk 

F. gatekeeper 

Answer:


Q33. Which functionality does ILS use to link all hub clusters in an ILS network? 

A. Fullmesh 

B. Automesh 

C. ILS updates 

D. multicast 

Answer:


Q34. When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility? 

A. The login will fail because only a single Cisco Extension Mobility profile is allowed. 

B. The user must select the desired profile. 

C. The user must login to both profiles in the order they are presented. 

D. The user may login to both profiles in any order. 

E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). If a user has more than one user device profile, a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsem.html 


Q35. Which three devices support the SAF Call Control Discovery protocol? (Choose three.) 

A. Cisco Unified Border Element 

B. Cisco Unity Connection 

C. Cisco IOS Gatekeeper 

D. Cisco Catalyst Switch 

E. Cisco IOS Gateway 

F. Cisco Unified Communications Manager 

Answer: A,E,F 


Q36. Company X has three locations connected via a low bandwidth WAN. Which two configurations are required in the Cisco Unified Communications Manager regions to provide the most suitable use of bandwidth while preserving the call quality? (Choose two.) 

A. g729 codec for intraregion calling 

B. g722/g711 codec for interregion calling 

C. g729 codec for interregion calling 

D. g722/g711 for intraregion calling 

E. g729 codec for all calling 

F. g722/g711 codec for all calling 

Answer: C,D 


Q37. Refer to the exhibit. 

If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.) 

A. The physical locations are not different, so the configuration of the phone is not modified. 

B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied. 

C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters. 

D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm. 

E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone. 

Answer: B,C 


Q38. How can the location setting be modified to resolve poor call quality? 

A. No adjustment to location setting is needed 

B. Mark the bandwidth between the locations as unlimited 

C. Decrease the audio bandwidth setting 

D. Remove the audio bandwidth setting 

Answer:


Q39. Which two locations are the best locations that an end user can use to determine if an IP phone is working in SRST mode? (Choose two.) 

A. Cisco Unified Communications Manager Administration 

B. IP phone display 

C. Cisco Unified SRST Router 

D. Cisco Unified MGCP Fallback Router 

E. physical IP phone settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D IP Phone display and Physical phone IP settings are two locations were an end user can determine if an IP phone is working in SRST mode. Link: http://my.safaribooksonline.com/book/telephony/1587050757/survivable-remote-site-telephony-srst/529 


Q40. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.) 

A. Calling-party numbers are routed from the gateway or trunks to phones. 

B. Called-party numbers are routed from the gateway or trunks to phones. 

C. Calling-party numbers of internal calls are routed from the gateway or trunks. 

D. Calling-party calls are routed to the gateway and trunks. 

Answer: A,D