Your success in 300-080 Braindumps is our sole target and we develop all our 300-080 Exam Dumps in a way that facilitates the attainment of this target. Not only is our 300-080 Exam Dumps material the best you can find, it is also the most detailed and the most updated. 300-080 Free Practice Questions for Cisco 300-080 are written to the highest standards of technical accuracy.

Cisco 300-080 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
Which meaning does the universal keyword have in this dspfarm profile configuration?
300-080 dumps exhibit

  • A. The profile allocates DSP resources in flexible mode.
  • B. The profile allows transcoding between any configured codecs.
  • C. The profile can be used not only as transcoder but also as MTP.
  • D. No special meaning, this is the default setting.

Answer: B

NEW QUESTION 2
Which Cisco Unified Communications Manager tool can you use to troubleshoot issues with international calling?

  • A. Cisco Prime
  • B. Cisco Deployment Tool
  • C. RTMT
  • D. Dialed Number Analyzer

Answer: C

NEW QUESTION 3
Calls drop right after the called party tries to answer the call. Which of the below reasons is true?

  • A. Phone A is using SCCP and phone B is using SIP
  • B. Firewall is blocking RTP packets
  • C. An incompatible MTP type is allocated to the call
  • D. Codec are mismatched between phones

Answer: D

NEW QUESTION 4
Partitions can be assigned to which two items? (Choose two)

  • A. directory numbers
  • B. trunks
  • C. devices
  • D. gateways
  • E. IP phones

Answer: AD

NEW QUESTION 5
When parsing trace output after the call routing decision and path selection have been made, which two records can be found in the CCM|RouteList? (Choose two.)

  • A. PretransfromDigitString
  • B. CallingPartyNumber
  • C. PretransformCallingPartyNumber
  • D. RouteListName
  • E. findLocalDevice
  • F. RouteListCdrc :

Answer: DF

NEW QUESTION 6
Refer to the exhibits.
300-080 dumps exhibit
Assume that all learned SAF routes are placed in the SAF_Pt partition. An IP phone CSS contains the following partitions in this order: Internal_Pt, SAF_Pt. When the IP phone places a Call to 3001, what will occur?

  • A. The call will succeed and will be placed via the SAF networ
  • B. SAF-learned routes always take precedence.
  • C. The call will fail because it will be blocked by the route pattern.
  • D. The call will be placed in a round-robin fashion between the SAF network and SIP_Trunk.
  • E. The call will be placed in a round-robin fashion between the SAF network and SIP_Trun
  • F. Every other call will fail.

Answer: B

NEW QUESTION 7
Refer to the exhibit.
300-080 dumps exhibit
When the user tried to configure the command maximum sessions 5 under the dspfarm profile 1, the error shown in the exhibit was reported. Which course of action will resolve this issue?

  • A. The maximum conference-participants value must be configured >0.
  • B. Ensure that the conference bridge is not registered in Cisco Unified Communications Manager.
  • C. The command dsp services dspfarm must be configured under the voice-card configuration.
  • D. Configure the dspfarm all command under the voice card.

Answer: C

NEW QUESTION 8
Refer to the exhibit.
300-080 dumps exhibit
ACustomer has two Cisco Unified Communications Manager clusters (NY and CAL). The customer recently tried to enable intercluster communication between these clusters. When NY users call CAL, they get a
fast-busy tone. A network administrator collects Cisco CallManager traces and sees the displayed SIP message coming from the remote Cisco Unified Communication Manager (CAL cluster). What is a likely reason for this?

  • A. Cisco CallManager service is shut down on the CAL cluster.
  • B. The SIP service is shut down on the CAL cluster.
  • C. The SIP trunk on the CAL cluster is configured incorrectly.
  • D. Cisco CTI Manager service is shut down on the CAL cluster.
  • E. The remote Cisco IP phone is not registered.

Answer: E

NEW QUESTION 9
a Company has a headquarters site and a remote site. Cisco Unified Communications Manager acts as a DHCP server. Both sites use their local voice gateways for PSTN calls. At the headquarters site, the PSTN
prefix is 9, and the emergency number is 911. At the remote site, the PSTN prefix is 0, and the emergency number is 112. Here are the deployment policies for roaming devices:
300-080 dumps exhibit Softphones can roam between two sites.
300-080 dumps exhibit A roaming softphone uses the local gateway for all PSTN calls.
300-080 dumps exhibit The user keeps home dial habits on a roaming softphone, with the exception of the emergency number. When a headquarters user uses a softphone at the remote site, the administrator notices that the PSTN calls are
still going via voice gateway in the headquarters. The administrator enabled Device Mobility in the system parameters and on all phones. What are the next two components that the administrator must check, according to the flow of Device Mobility operation? (Choose two.)

  • A. IP address of the softphone
  • B. Cisco Unified CM Group
  • C. Device Mobility Info
  • D. Physical Location
  • E. Device Mobility Group

Answer: AE

NEW QUESTION 10
Which three items are displayed on the endpoint registration verification page in Cisco VCS? (Choose three.)

  • A. E.164 address
  • B. endpoint name
  • C. endpoint MAC address
  • D. endpoint registration status
  • E. device description
  • F. device type
  • G. device pool

Answer: ABF

NEW QUESTION 11
An endpoint has a SIP trunk configured between Cisco Unified Communications Manager (CUCM) and a Cisco VCS cluster. When a Call is made from a Cisco TelePresence System EX60 that is registered to the Cisco VCS to a Cisco IP Phone 9971 that is registered to CUCM, it rings. But upon picking up the call, ABusy tone is heard. What should be checked to resolve this issue?

  • A. CUCM zone on the Cisco VCS.
  • B. SIP trunk and phone region settings.
  • C. SIP trunk registration.
  • D. authentication on the SIP trunk.

Answer: B

NEW QUESTION 12
Several users at your site have reported that they receive a fast busy when they call another site within the same cluster. Which action can you take to connect the problem?

  • A. Rebuild the SIP trunk between Cisco Unified Communications Manager and the gateway.
  • B. Run RTMT to check the status of the Cisco Unified Communications Manager services.
  • C. Reset the intercluster trunk from your site to the remote site.
  • D. Correct the grouping of the site partitions and calling search spaces.

Answer: D

NEW QUESTION 13
Refer to the exhibit. An engineer is troubleshooting a SAF client that is not registering with the SAF forwarder.
300-080 dumps exhibit
What is the root cause of the issue?

  • A. The packets are being dropped on the network.
  • B. The SAF password is incorrectly configured.
  • C. The SAF port is incorrectly configured.
  • D. The client SAF label is incorrectly configured.

Answer: A

NEW QUESTION 14
In a Cisco UCM multisite WAN with centralized call-processing deployment model, what redundancy feature should be configured on remote site routers to provide basic IP telephony services in the event of a WAN outage?

  • A. AAR
  • B. SRST
  • C. CAC
  • D. V3PN

Answer: B

NEW QUESTION 15
Refer to the exhibit.
300-080 dumps exhibit
How many high-complexity transcoding sessions can this Cisco ISR G2 support?

  • A. 21
  • B. 14
  • C. 60
  • D. 15

Answer: B

NEW QUESTION 16
How does an IP Phone react upon initialization, if there is no CTL and ITL files present on the device?

  • A. The phone downloads only the files that are signed to that device.
  • B. The phone blindly trusts the next series of downloadeDFiles.
  • C. The file matches the signature against the files on TFTP.
  • D. The phone displays the message, Unprovisioned.

Answer: D

Recommend!! Get the Full 300-080 dumps in VCE and PDF From 2passeasy, Welcome to Download: https://www.2passeasy.com/dumps/300-080/ (New 219 Q&As Version)