Renovate 350-401 Free Practice Test For Implementing And Operating Cisco Enterprise Network Core Technologies Certification

NEW QUESTION 1
DRAG DROP
Drag and drop the snippets onto the blanks within the code to construct a script that advertises the network prefix 192.168.5.0/24 into a BGP session. Not all options are used

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 2

What is the difference between CEF and process switching?

• A. CEF processes packets that are too complex for process switching to manage.
• B. CEF is more CPU-intensive than process switching.
• C. CEF uses the FIB and the adjacency table to make forwarding decisions, whereas process switching punts each packet.
• D. Process switching is faster than CEF.

Answer: C

NEW QUESTION 3
DRAG DROP
Drag and drop the tools from the left onto the agent types on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4

Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

NEW QUESTION 5

What is required for intercontroller Layer 3 roaming?

• A. Mobility groups are established between wireless controllers.
• B. The management VLAN is present as a dynamic VLAN on the second WLC.
• C. WLCs use separate DHCP servers.
• D. WLCs have the same IP addresses configured on their interfaces.

Answer: D

NEW QUESTION 6

What is one role of the VTEP in a VXLAN environment?

• A. to forward packets to non-LISP sites
• B. to encapsulate the tunnel
• C. to maintain VLAN configuration consistency
• D. to provide EID-to-RLOC mapping

Answer: B

NEW QUESTION 7

Which JSON script is properly formatted?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

Explanation:
Option A is the properly formatted JSON script. JSON (JavaScript Object Notation) is a standard text-based format for representing structured data based on JavaScript object syntax. It is commonly used for transmitting data in web applications (e.g., sending some data from the server to the client, so it can be displayed on a web page, or vice versa). The JSON syntax rules are as follows12:
✑ Data is in name/value pairs, separated by commas. A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value: "name": "value".
✑ Curly braces hold objects. An object can contain multiple name/value pairs: {"name": "value", "name": "value", ...}.
✑ Square brackets hold arrays. An array can contain multiple values, separated by commas: ["value", "value", ...].
✑ Values can be strings (in double quotes), numbers, booleans (true or false), null, objects, or arrays.
Option A follows these rules and is a valid JSON script. It defines an object with four name/value pairs: "name", "age", "hobbies", and "address". The value of "name" is a string, the value of "age" is a number, the value of "hobbies" is an array of strings, and the value of "address" is another object with two name/value pairs: "city" and "country". The object is enclosed in curly braces and the name/value pairs are separated by commas.
Option B is not a valid JSON script because it uses single quotes instead of double quotes for the field names and string values. JSON requires double quotes for strings12.
Option C is not a valid JSON script because it does not use commas to separate the name/value pairs. JSON requires commas to separate the data elements within an object or an array12.
Option D is not a valid JSON script because it uses a semicolon instead of a colon to separate the field name and the value. JSON requires a colon to separate the name and the value in a name/value pair12. References: 1: JSON Introduction, 2: JSON Syntax

NEW QUESTION 8

A customer has 20 stores located throughout a city. Each store has a single Cisco access point managed by a central WLC. The customer wants to gather analysis for users in each store. Which technique supports these requirements?

• A. angle of arrival
• B. hyperlocation
• C. trilateration
• D. presence

Answer: B

NEW QUESTION 9

Which behavior can be expected when the HSRP versions is changed from 1 to 2?

• A. Each HSRP group reinitializes because the virtual MAC address has changed.
• B. No changes occur because version 1 and 2 use the same virtual MAC OUI.
• C. Each HSRP group reinitializes because the multicast address has changed.
• D. No changes occur because the standby router is upgraded before the active router.

Answer: A

NEW QUESTION 10

Refer to the exhibit.

Both controllers are in the same mobility group. Which result occurs when client 1 roams between APs that are registered to different controllers in the same WLAN?

• A. Client 1 contact controller B by using an EoIP tunnel.
• B. CAPWAP tunnel is created between controller A and controller B.
• C. Client 1 users an EoIP tunnel to contact controller A.
• D. The client database entry moves from controller A to controller B.

Answer: D

NEW QUESTION 11

Which authorization framework gives third-party applications limited access to HTTP services?

• A. iPsec
• B. Basic Auth
• C. GRE
• D. OAuth 2.0

Answer: D

NEW QUESTION 12

An engineer is configuring local web authentication on a WLAN. The engineer chooses the Authentication radio button under the Layer 3 Security options for Web Policy. Which device presents the web authentication for the WLAN?

• A. ISE server
• B. local WLC
• C. RADIUS server
• D. anchor WLC

Answer: B

Explanation:
“The next step is to configure the WLC for the Internal web authentication. Internal web authentication is the defaultweb authentication type on WLCs.”
In step 4 of the link above, we will configure Security as described in this question. Therefore we can deduce thisconfiguration is for Internal web authentication.
This paragraph was taken from the link https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html#c5 :

NEW QUESTION 13

What does Call Admission Control require the client to send in order to reserve the bandwidth?

• A. SIP flow information
• B. Wi-Fi multimedia
• C. traffic specification
• D. VoIP media session awareness

Answer: C

NEW QUESTION 14

Why does the vBond orchestrator have a public IP?
to enable vBond to team the public IP of WAN Edge devices that are behind NAT gateways or in private address space

• A. to facilitate downloading and distribution of operational and security patches
• B. to allow for global reachability from all WAN Edges in the Cisco SD-WAN and
• C. to facilitate NAT traversal to provide access
• D. to Cisco Smart Licensing servers for license enablement

Answer: C

NEW QUESTION 15

Refer to the exhibit.

After configuring HSRP an engineer enters the show standby command. Which two facts are derived from the output? (Choose two.)

• A. The router with IP 10.10 1.3 is active because it has a higher IP address
• B. If Fa0/0 is shut down, the HSRP priority on R2 becomes 80
• C. R2 Fa1/0 regains the primary role when the link comes back up
• D. R2 becomes the active router after the hold time expires.
• E. R2 is using the default HSRP hello and hold timers.

Answer: DE

NEW QUESTION 16
......