Cause all that matters here is passing the Network-Appliance NS0-592 exam. Cause all that you need is a high score of NS0-592 NetApp Certified Support Engineer - ONTAP Specialist exam. The only one thing you need to do is downloading Testking NS0-592 exam study guides now. We will not let you down with our money-back guarantee.

Free NS0-592 Demo Online For Network-Appliance Certifitcation:

NEW QUESTION 1
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer’s request?

  • A. perfstat
  • B. perfmon
  • C. OneCollect
  • D. Performance Archive

Answer: C

NEW QUESTION 2
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?

  • A. The clients are using NFSv4 to access the volumes.
  • B. The export policies are incorrect and must be updated with node’s HA partner LIF information.
  • C. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
  • D. NFSv4 file locks need to be broken manually before initiating an SFO operation.

Answer: A

NEW QUESTION 3
Click the exhibit button.
NS0-592 dumps exhibit
A customer reports that their system recently began logging an error. Referring to the exhibit, which two statements are correct? (Choose two.)

  • A. The bcomd application is responsible for monitoring the observed behavior.
  • B. A user is attempting to restart the ntpd daemon.
  • C. The spmd application failed to restart the ntpd daemon.
  • D. The ntpd daemon is responsible for time services.

Answer: BD

NEW QUESTION 4
Click the exhibit button.
NS0-592 dumps exhibit
A volume move operation has been initiated to move a volume named MirrScr from one aggregate to another. The operation failed with the error that is shown in the exhibit.
In this scenario, which statement is correct?

  • A. Manually trigger the cutover process in order to restart the job.
  • B. The volume move cannot be completed at this time because of high use in this node.
  • C. There are too many snapshots on the source volume.
  • D. Cancel and restart the volume move operation.

Answer: A

NEW QUESTION 5
In a 4-node cluster, nodes 1 and 2 are an HA pair, and nodes 3 and 4 are an HA pair. The following error appears in the log.
12/15/2018 15:48:47 node-2CRITICALclam.node.ooq: Node (name=node- 2, ID= 1001) is out of “CLAM quorum” (reason =quorum update).
In this scenario, which two statements are correct? (Choose two.)

  • A. All LUNs are offline in the cluster.
  • B. All LUNs are online in the cluster.
  • C. Node 1 takes over node 2.
  • D. Node 2 takes over node 1.

Answer: AC

NEW QUESTION 6
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?

  • A. qos statistics performance show
  • B. qos statistics latency show
  • C. sysstat -c 30 -M 1
  • D. wafltop show -v -cpu -I 10 -c 5-n 6

Answer: A

NEW QUESTION 7
Which statement is correct about the wafliron command?

  • A. The wafliron command is used to correct parity inconsistencies.
  • B. The wafliron command is used to correct inconsistent WAFL metadata.
  • C. The wafliron command is used to correct WAFL i2p inconsistencies.
  • D. The wafliron command is used to correct inconsistent user data blocks.

Answer: B

NEW QUESTION 8
Click the exhibit button.
NS0-592 dumps exhibit
A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)

  • A. Verify that the -symlink-properties parameter is enabled on the share.
  • B. Verify that the access-based-enumeration share parameter is configured.
  • C. Verify that the continuously -available share parameter is configured.
  • D. Verify that -offline-files parameter is set to manual on the share.
  • E. Verify that the oplocks share property is configured.

Answer: BCE

NEW QUESTION 9
Click the exhibit button.
NS0-592 dumps exhibit
A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)

  • A. Review the LIF configuration on the cluster.
  • B. Review the driver version on the server.
  • C. Review that the host side FC link ports are enabled.
  • D. Review the igroup configuration on the cluster.

Answer: AB

NEW QUESTION 10
Click the exhibit button.
NS0-592 dumps exhibit
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)

  • A. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
  • B. The FAS2554 system is cabled incorrectly to shelf ID 20.
  • C. The DS2246 shelf is wrong; the shelf ID must be 11.
  • D. Disk shelves 10 and 20 are cabled incorrectly to each other.

Answer: BD

NEW QUESTION 11
Click the exhibit button.
NS0-592 dumps exhibit
NS0-592 dumps exhibit
A storage administrator reports that when they enabled Vscan, they began receiving reports of CIFS users having very slow access to all their files. The storage administrator recovered from the issue by disabling Vscan on their SVM. The storage administrator was able to collect perfstat output during the time of the reported slow access, as shown in the exhibit.
In this situation, what is the problem?

  • A. The problem is on the SVM, as shown in the scan_latency output.
  • B. Vscan server 192.168.100.144 was slower than Vscan server 10.23.23.54 in completing Vscan requests.
  • C. Vscan server 10.23.23.54 was slower than Vscan server 192.168.100.144 in completing Vscan requests.
  • D. The problem was with both Vscan servers 192.168.100.144 and 10.23.23.54.

Answer: B

NEW QUESTION 12
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an “access denied” error.
Which two statements would cause this error? (Choose two.)

  • A. The NFS server does not have NFSv4 enabled.
  • B. The SVM’s root volume allows execute access for all users.
  • C. The export policy applied to the data volume does not allow clients to access it using NFSv4.
  • D. The export policy applied to the SVM’s root volume does not allow the NFSv4 clients to access it.

Answer: BC

NEW QUESTION 13
You want to determine which SMB versions that a CIFS server can use when communicating with external servers.
Which two CIFS server settings should be reviewed to accomplish this task? (Choose two.)

  • A. smb2-enabled
  • B. smb1-enabled-for-dc-connections
  • C. smb2-enabled-for-dc-conections
  • D. smb1-enabled

Answer: CD

NEW QUESTION 14
A customer reports that one their SVMs has two default gateways. The customer wants to know whether this behavior is expected or if one of gateways should be deleted.
In this scenario, what do you tell the customer?

  • A. The configuration is acceptable if the customer configures different metrics on all defaults routes.
  • B. The configuration is acceptable only if both default gateways are in the same subnet.
  • C. This situation is a misconfiguration, and the customer should delete one of the default gateways because there can be only gateway for each SVM.
  • D. The configuration is acceptabl
  • E. The customer can achieve load balancing between the default gateways by setting the same metric on all default routes.

Answer: A

NEW QUESTION 15
In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.
Which three components should be verified to determine what is causing this problem? (Choose three.)

  • A. the SFPs that are connecting the ATTO bridge to the switch
  • B. the dark fiber cables between sites
  • C. the ATTO bridge
  • D. the SFPs in the storage controllers
  • E. the fiber cable that is connecting the ATTO bridge to the switch

Answer: ACE

NEW QUESTION 16
At a customer site, the storage failover giveback command fails when giving back the root aggregate. What would be two reasons for this failure? (Choose two.)

  • A. There are active NFS connections.
  • B. There are failed disks.
  • C. The HA interconnect is not operational.
  • D. There are active SIS operations running.

Answer: BC

NEW QUESTION 17
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

  • A. Verify that there cross-links between the interconnects.
  • B. Verify that the installed FC-VI cards are configured properly.
  • C. Verify that the interconnect cables on the motherboard are connected correctly.
  • D. Verify that the interconnect cables on the IOXM are connected correctly.

Answer: D

NEW QUESTION 18
Click the exhibit button.
NS0-592 dumps exhibit
Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf. Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
“Both SAS connections from one controller go to the same shelf.” Referring to the exhibit, which statement is correct?

  • A. You are unable to obtain a “Cable Visualization” overview from Active IQ.
  • B. A faulty cable is causing the problem.
  • C. A faulty IOM is causing the problem.
  • D. You can correct this problem without downtime on the FAS system.

Answer: D

NEW QUESTION 19
......

100% Valid and Newest Version NS0-592 Questions & Answers shared by DumpSolutions.com, Get Full Dumps HERE: https://www.dumpsolutions.com/NS0-592-dumps/ (New 65 Q&As)