Proper study guides for Leading Cisco Managing Industrial Networks with Cisco Networking Technologies certified begins with Cisco 200-401 preparation products which designed to deliver the Best Quality 200-401 questions by making you pass the 200-401 test at your first time. Try the free 200-401 demo right now.

2021 Nov expected status code (200-299) got 401:

Q21. - (Topic 5) 

Which two pieces of information are commonly tracked as part of a change management process? (Choose two.) 

A. reason for the change 

B. names of people involved in the change 

C. return on investment related to the change 

D. SWOT analysis related to the change 

E. scatter diagrams related to the change 

Answer: A,B 


Q22. - (Topic 4) 

At which Layer would you check for spanning tree loops? 

A. Layer 1 

B. Layer 2 

C. Layer 3 

D. Layer 4 

Answer: B 


Q23. - (Topic 5) 

With a Cisco IE 2000 switch, what does a power status LED indicate when it is solid green? 

A. Power is present on the associated circuit and the system is operating normally. 

B. Power is present on the associated circuit, but there is no correlation to whether the system is operating normally. 

C. The system is operating normally, but power is not necessarily present on the associated circuit. 

D. Power is not present on the associated circuit and the power supply alarm is configured. 

E. The power status LED does not show solid green. 

Answer: A 


Q24. - (Topic 5) 

What is a characteristic of cables that are used in articulating equipment arms? 

A. fiber-optic zip-cord construction 

B. shielded copper twisted pair 

C. high flex rated cable 

D. type PLTC.cable 

Answer: C 


Q25. - (Topic 5) 

What do deflections indicate to the time domain reflectometer user? 

A. They indicate splices, water in the cable, split pairs, and discontinuities or faults. 

B. Do not connect live circuit cables to the input of the time domain reflectometer. Connect the cable that is being tested to the cable connector on the front panel of the time domain reflectometer. 

C. Upward deflections indicate high-impedance mismatches or opens, and downward deflections indicate shorts or low-impedance mismatches. 

D. They are used to select the I/O impedance of the time domain reflectometer. You can select 50, 75, 95, or.125? impedances. 

Answer: C 


Down to date 200-401:

Q26. - (Topic 2) 

Which two ports does EtherNet/IP use to communicate? (Choose two.) 

A. TCP 44818 

B. UDP 44818 

C. TCP 502 

D. UDP 502 

E. TCP 2222 

F. UDP 2222 

Answer: A,F 


Q27. - (Topic 3) 

Which option best describes a mechanical, ingress, climatic, chemical and electromagnetic environment that is classified as M3 I3 C3 E3? 

A. the highest quality 

B. office environment 

C. severe 

D. serviced by multiple cable segments 

Answer: C 


Q28. - (Topic 5) 

How does the optical time domain reflectometer use "backscattered" light to make measurements? 

A. It uses pulses to locate and test for sheath faults, damaged conductors, loose connectors, splices, bridge taps, split pairs, and other problems. 

B. It performs wiremapping to measure that all pins are correctly connected. 

C. It correlates the returned light pulses with a location in the fiber. 

D. It measures light-pulse width to measure that all pins are correctly connected. 

Answer: C 


Q29. - (Topic 4) 

What are two symptoms of duplex mismatch? (Choose two.) 

A. Ping does not return from one direction versus the other direction. 

B. Communication is slow and locks up. 

C. Speed is seen equally slow in both directions. 

D. The half-duplex side sees frame sequence errors or runt frames. 

E. The full-duplex side sees CRC errors. 

Answer: B,D 


Q30. - (Topic 5) 

Which protocol is a secure alternative to Telnet? 

A. SSH 

B. FTP 

C. SMTP 

D. SNMP 

E. HTTP 

Answer: A