All About Top Quality 201 Free Demo

NEW QUESTION 1
A virtual server is defined using a source address based persistence profile. The last five connections were A, B, C, A, C . Given the conditions shown in the graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection?

• A. 10.10.20.1:80
• B. 10.10.20.2:80
• C. 10.10.20.3:80
• D. 10.10.20.4:80
• E. 10.10.20.5:80

Answer: B

NEW QUESTION 2
Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content. What is the likely cause of the issue?

• A. The pool associated with the virtual server does not have priority group activation enabled.
• B. The virtual address does not have ARP enabled.
• C. The virtual address does not have route advertising enabled.
• D. The pool associated with the virtual server is falling its health check.

Answer: B

NEW QUESTION 3
A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?

• A. Device Management > Traffic Groups
• B. Device Management > Devices
• C. Local Traffic > Virtual Servers
• D. Device Management > Overview

Answer: C

NEW QUESTION 4
A BIG-IP Administrator needs to find which modules have been licensed for use on the BIG-IP system. In which section of the Configuration Utility can the BIG-IP Administrator find this information?

• A. System > Services
• B. System > Resource Provisioning
• C. System > Platform
• D. System > Support

Answer: B

NEW QUESTION 5
Where is connection mirroring configured?

• A. It an option within a TCP profile.
• B. It is an optional feature of each pool.
• C. It is not configured; it is default behavior.
• D. It is an optional feature of each virtual server.

Answer: D

NEW QUESTION 6
What is the status of a pool member when manual resume is enabled and a health check first fails and then passes?

• A. Offline (Disabled)
• B. Offline (Enabled)
• C. Available (Disabled)
• D. Available (Enabled)

Answer: A

NEW QUESTION 7
You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2?

• A. All changes to TEST1 are propagated to TEST2.
• B. Some of the changes to TEST1 may propagate to TEST2.
• C. Changes to TEST1 cannot affect TEST2 once TEST2 is saved.
• D. When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.

Answer: B

NEW QUESTION 8
Which process or system can be monitored by the BIG-IP system and used as a failover trigger in a redundant pair configuration?

• A. bandwidth utilization
• B. duplicate IP address
• C. CPU utilization percentage
• D. VLAN communication ability

Answer: D

NEW QUESTION 9
Which statement is true concerning iRule events?

• A. All iRule events relate to HTTP processes.
• B. All client traffic has data that could be used to trigger iRule events.
• C. All iRule events are appropriate at any point in the clientserver communication.
• D. If an iRule references an event that doesn't occur during the client's communication, the client's connection will be terminated prematurely.

Answer: B

NEW QUESTION 10
A BIG-IP Administrator wants to add the ASM Module to an HA pair of BIG-IP devices. The BIG-IP Administrator has already installed a new Add-On License on both devices in the HA pair. What should the BIG-IP Administrator do next to use the module?

• A. Provision the new module on both BIG-IP device's
• B. Synchronize both BIG-IP devices
• C. Reboot both BIG-IP devices
• D. Reactivate the Licenses on both BIG IP devices

Answer: A

NEW QUESTION 11
Which three statements describe a characteristic of profiles? (Choose three.)

• A. Default profiles cannot be created or deleted.
• B. Custom profiles are always based on a parent profile.
• C. A profile can be a child of one profile and a parent of another.
• D. All changes to parent profiles are propagated to their child profiles.
• E. While most virtual servers have at least one profile associated with them, it is not required.

Answer: ABC

NEW QUESTION 12
A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic. The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status.

What is the possible cause of this issue?

• A. The Node Health Monitor is NOT responding.
• B. The application is NOT responding with the expected Receive String.
• C. HTTP 1.1 is NOT appropriate for monitoring purposes.
• D. The BIG-IP device is NOT able to reach the Pool.

Answer: A

NEW QUESTION 13
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

NEW QUESTION 14
When configuring a pool member's monitor, which three association options are available? (Choose three.)

• A. inherit the pool's monitor
• B. inherit the node's monitor
• C. configure a default monitor
• D. assign a monitor to the specific member
• E. do not assign any monitor to the specific member

Answer: ADE

NEW QUESTION 15
Refer to the exhibit.
During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

• A. The Tag voice on the Standby device
• B. The interface on the Active device to 1.1
• C. The Tag value on the Active device
• D. The Interface on the Standby device to 1.1

Answer: A

NEW QUESTION 16
A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.
What should the BIG-IP Administrator do to change the boot location to the previous hotfix?

• A. Uninstall the newest hotfix and reinstall the previous hotfix
• B. Reinstall the base version and install the previous hotfix
• C. Reinstall the previous hotfix and re-activate the license
• D. Uninstall the base version and restore the UCS

Answer: B

NEW QUESTION 17
The BIG-IP Administrator generates QKView using tmsh command "qkview -SO". In which directory does the BIG-IP appliance save the QKView?

• A. /etc/tmp
• B. /var/tmp
• C. /shared/qkview
• D. /var /tmp/qkview

Answer: B

NEW QUESTION 18
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?

• A. Verify the TMOS version and review the release notes
• B. Create a UCS archive and upload to Health
• C. Create a UCS archive and open an F5 Support request
• D. Generate a view and upload to Heath

Answer: D

NEW QUESTION 19
Which statement describes a typical purpose of iRules?

• A. iRules can be used to add individual control characters to an HTTP data stream.
• B. iRules can be used to update the timers on monitors as a server load changes.
• C. iRules can examine a server response and remove it from a pool if the response is unexpected.
• D. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing

Answer: A

NEW QUESTION 20
Refer to the exhibit.
A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application
What should the administrator do to resolve this issue?

• A. Change the Virtual Server name
• B. Disable .he State
• C. Reconfigure the Source Address
• D. Reconfigure the Pool Members

Answer: D

NEW QUESTION 21
......