It is more faster and easier to pass the Cisco 300-730 exam by using Downloadable Cisco Implementing Secure Solutions with Virtual Private Networks (SVPN) questuins and answers. Immediate access to the Improved 300-730 Exam and find the same core area 300-730 questions with professionally verified answers, then PASS your exam with a high score now.
Check 300-730 free dumps before getting the full version:
NEW QUESTION 1
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
- A. Endpoint Assessment
- B. Cisco Secure Desktop
- C. Basic Host Scan
- D. Advanced Endpoint Assessment
Answer: D
NEW QUESTION 2
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?
- A. sequence numbers that enable scalable replay checking
- B. enabled use of ESP or AH
- C. design for use over public or private WAN
- D. no requirement for an overlay routing protocol
Answer: D
NEW QUESTION 3
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-connect
- C. auto-start
- D. auto-run
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/vpn/asa_91_vpn_config/webvpn-configure-policy-group.html
NEW QUESTION 4
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
- A. interface virtual-access
- B. ip nhrp redirect
- C. interface tunnel
- D. interface virtual-template
Answer: D
NEW QUESTION 5
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?
- A. The XML profile is not configured correctly for the affected users.
- B. The new client image does not use the same major release as the current one.
- C. Client services are not enabled.
- D. Client software updates are not supported with IKEv2.
Answer: C
NEW QUESTION 6
Refer to the exhibit.
The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
A.
- A.

- B.
D.
Answer: D
NEW QUESTION 7
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
- A. Add NHRP shortcuts on the hub.
- B. Add NHRP redirects on the spoke.
- C. Disable EIGRP next-hop-self on the hub.
- D. Enable EIGRP next-hop-self on the hub.
- E. Add NHRP redirects on the hub.
Answer: CE
NEW QUESTION 8
Refer to the exhibit.
All internal clients behind the ASA are port address translated to the public outside interface that has an IP address of 3.3.3.3. Client 1 and client 2 have established successful SSL VPN connections to the ASA. What must be implemented so that "3.3.3.3" is returned from a browser search on the IP address?
- A. Same-security-traffic permit inter-interface under Group Policy
- B. Exclude Network List Below under Group Policy
- C. Tunnel All Networks under Group Policy
- D. Tunnel Network List Below under Group Policy
Answer: D
NEW QUESTION 9
Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)
- A. group-alias
- B. certificate map
- C. optimal gateway selection
- D. group-url
- E. AnyConnect client version
Answer: BD
NEW QUESTION 10
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. GRE over IPsec on IOS router
- B. GRE over IPsec on FTD
- C. IPsec tunnel on FTD
- D. GRE tunnel on ASA
Answer: B
NEW QUESTION 11
What is a requirement for smart tunnels to function properly?
- A. Java or ActiveX must be enabled on the client machine.
- B. Applications must be UDP.
- C. Stateful failover must not be configured.
- D. The user on the client machine must have admin access.
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111007-smart-tunnel-asa-00.html
NEW QUESTION 12
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. crypto access list
- B. Phase 1 policy
- C. transform set
- D. preshared key
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409-ipsec-debug-00.html#ike
NEW QUESTION 13
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. code version
- B. highest IP address
- C. highest-priority value
- D. lowest IP address
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/deployment_guide_c07_554713.html
NEW QUESTION 14
Which technology works with IPsec stateful failover?
- A. GLBR
- B. HSRP
- C. GRE
- D. VRRP
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ft_vpnha.html#wp1122512
NEW QUESTION 15
Refer to the exhibit.
Which VPN technology is used in the exhibit?
- A. DVTI
- B. VTI
- C. DMVPN
- D. GRE
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnips/configuration/zZ-Archive/IPsec_Virtual_Tunnel_Interface.html#GUID-EB8C433B-2394-42B9-997F-B40803E58A91
NEW QUESTION 16
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
- A. svc import profile SSL_profile flash:simos-profile.xml
- B. anyconnect profile SSL_profile flash:simos-profile.xml
- C. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
- D. webvpn import profile SSL_profile flash:simos-profile.xml
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/200533-AnyConnect-Configure-Basic-SSLVPN-for-I.html
NEW QUESTION 17
Refer to the exhibit.
A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. An authentication failure occurs on the remote peer.
- B. A certificate fragmentation issue occurs between both sides.
- C. UDP 4500 traffic from the peer does not reach the router.
- D. An authentication failure occurs on the router.
Answer: C
NEW QUESTION 18
What are two functions of ECDH and ECDSA? (Choose two.)
- A. nonrepudiation
- B. revocation
- C. digital signature
- D. key exchange
- E. encryption
Answer: CD
Explanation:
Reference: https://tools.cisco.com/security/center/resources/next_generation_cryptography
NEW QUESTION 19
Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?
- A. show crypto ikev2 sa
- B. show crypto isakmp sa
- C. show crypto gkm
- D. show crypto identity
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116413-configure-flexvpn-00.pdf
NEW QUESTION 20
Refer to the exhibit.
The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. The HostName is incorrect.
- B. The IP address is incorrect.
- C. Primary protocol should be SSL.
- D. UserGroup must match connection profile.
Answer: D
Explanation:
Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION 21
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (general-attributes)
- B. tunnel-group (webvpn-attributes)
- C. webvpn (group-policy)
- D. webvpn (global configuration)
Answer: D
NEW QUESTION 22
Which VPN solution uses TBAR?
- A. GETVPN
- B. VTI
- C. DMVPN
- D. Cisco AnyConnect
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get-vpn-xe-3s-book/sec-get-vpn.html
NEW QUESTION 23
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show crypto isakmp sa
- B. show ip traffic
- C. show crypto ipsec sa
- D. show ip nhrp traffic
- E. show dmvpn detail
Answer: AD
NEW QUESTION 24
Which parameter must match on all routers in a DMVPN Phase 3 cloud?
- A. GRE tunnel key
- B. NHRP network ID
- C. tunnel VRF
- D. EIGRP split-horizon setting
Answer: A
NEW QUESTION 25
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?
- A. IKEv2 IKE_SA_INIT
- B. IKEv2 INFORMATIONAL
- C. IKEv2 CREATE_CHILD_SA
- D. IKEv2 IKE_AUTH
Answer: B
NEW QUESTION 26
......
Recommend!! Get the Full 300-730 dumps in VCE and PDF From Allfreedumps.com, Welcome to Download: https://www.allfreedumps.com/300-730-dumps.html (New 0 Q&As Version)