What Printable 350-601 Practice Exam Is

NEW QUESTION 1
An engineer must generate a checkpoint of the running configuration on a Cisco Nexus Switch. The checkpoint file name must be called "before_maintenance' and should be used for recovering the switch to its pre- maintenance state. The rollback of the checkpoint to running configuration should only occur if no errors occur. Which two configuration commands must be used to meet these requirements? (Choose two.)

• A. rollback checkpoint rile before_maintenance stop-at-first-failure
• B. rollback running-conflg checkpoint before.maintenance
• C. checkpoint file before_maintenance
• D. checkpoint before.maintenance
• E. rollback running-conflg file before_maintenance atomic

Answer: CE

NEW QUESTION 2
What is an advantage of streaming telemetry over SNMP?

• A. on-change traps sent to a receiver
• B. periodic push-based subscription messages
• C. periodic polling of the device status
• D. MD5-based authentication on polling

Answer: B

NEW QUESTION 3
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

• A. EPLD updates are installed only via the Cisco DCNM GUI
• B. EPLD packages update hardware functionality on a device
• C. EPLD bundles are released separately from a Cisco MDS NX-OS release
• D. EPLD updates are nondisruptive to traffic flow

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.htm

NEW QUESTION 4
A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment. Which cloud service model meets these requirements?

• A. Infrastructure as a Service
• B. Function as a Service
• C. Platform as a Service
• D. Software as a Service

Answer: C

NEW QUESTION 5
A customer data center experiences bandwidth contention that affects the servers connected to the NPV enabled switch The NPV switch is connected to the NPIV switch using two 10 Gb uplinks but the traffic originating front the connected hosts to the core switch exceeds the available bandwidth The engineers decided to add a third uplink to the NPV server to increase the available bandwidth Which set of commands must be used to provision the new uplink?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: B

NEW QUESTION 6
Drag and drop the characteristics from the left onto the correct storage systems on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 7
Drag and drop the firmware packages from the left onto the software bundles they belong to on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 8
A cisco Nexus 9000 series switch experiences a startup configuration comuption. The engineer must implement a procedure to recover configuration file from the switch. Which command set must be used?

• A. * 1. Copy the running-configuration to the startup configuration.* 2. Clear the current configuration of the switch.* 3. Restart the device.* 4. Copy a previously saved configuration file to the running configuration.
• B. * 1. Clear the current configuration of the switch* 2. Restart the device.* 3. Copy the running configuration to the startup configuration* 4. Copy a previously saved configuration file to the running configuration
• C. * 1. Clear the current configuration of the switch* 2. Restart the device.* 3. Copy a previously saved configuration file to the running-configuration* 4. Copy the running-configuration to the startup configuration.
• D. * 1.Restarting device.* 2. Copy the running-configuration file to a remote server.* 3. Clear the current configuration of the switch.* 4. Copy the running configuration to the startup configuration

Answer: C

Explanation:
Problems, such as memory corruption, can occur that make it necessary for you to recover your configuration from a backed-up version.
Each time that you enter a copy running-config startup-config command, a binary file is created and the ASCII file is updated. A valid binary configuration file reduces the overall boot time significantly. A binary file cannot be uploaded, but its contents can be used to overwrite the existing startup configuration. The write erase command clears the binary file.
SUMMARY STEPS
* 1. write erase
* 2. reload
* 3. copy configuration-file running-configuration
* 4. copy running-config startup-config https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/fundamentals/configuration/guide

NEW QUESTION 9
Refer to the exhibit.

What is the result of this series of commands?

• A. It reboots the server immediately.
• B. It verifies the firmware update on the server.
• C. It activates the firmware on the next adapter boot.
• D. It updates the firmware on adapter 1/1/1 immediately.

Answer: C

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/ Graphical user interface, text, application, email Description automatically generated

NEW QUESTION 10
Which server policy is used to install new Cisco IMC software on a server?

• A. host firmware policy
• B. hypervisor firmware policy
• C. BIOS software policy
• D. Cisco IMC software policy

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware- Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/ b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_01.html#
You can use host firmware packages by defining a host firmware policy as an attribute of a service profile template, which is an updating template. Any change made to the service profile template is automatically made to its instantiated service profiles. Subsequently, the servers associated with the service profiles are also upgraded in parallel with the firmware version.
Graphical user interface, text, application Description automatically generated

NEW QUESTION 11
Which data structure results from running this Python code?

• A. tuple
• B. dictionary
• C. set
• D. list

Answer: B

NEW QUESTION 12
A network administrator attempts to automate the provisioning of several new Cisco Nexus switches. The administrator prepares a bootstrap configuration script for the task Due to the number of switches a zero-touch provisioning solution is preferred Additionally, some switches arrive with outdated software and should be automatically upgraded as part of the provisioning workflow Which solution meets the requirements’

• A. DHCP
• B. Ansible
• C. NX-API
• D. POAP

Answer: C

NEW QUESTION 13
A network architect must design an automation solution to initially support networking and also support the server infrastructure in the future. To keep configuration consistency, the network team requires a solution that enforces the desired state of the network and reverts any manual configuration. Which solution meets these goals?

• A. NX-API
• B. Ansible
• C. Terraform
• D. Puppet

Answer: D

NEW QUESTION 14
Refer to the exhibit.

An engineer must configure FCoE between the N9K-A switch and the FCF-A Nexus 9000 core switch. The deployment has these characteristics:
The N9K-Aand N9K-B top-of-rack switches share the domain ID of the core switches.
The hosts are equipped with converged network adapters.
The only VSAN that is permitted to traverse port-channel 100 is VSAN 20. Which configuration completes the FCoE configuration on the N9K-A device?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 15
A Cisco UCS user called “Employee1” accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?

• A. Modify the privilege level assigned to the user
• B. Assign users to a specific Cisco UCS locale
• C. Assign the user "Employee1" the network-operator role
• D. Define a custom user role and assign it to users

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem User Locales You can assign a user to one or more locales. Each locale defines one or more organizations (domains) to which a user can access. Access is usually limited to the organizations specified in the locale.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_rolebased_ access_control_conflguration.html#d18994e1993a1635

NEW QUESTION 16
......