We assure that you can also undoubtedly pass the genuine exam without just about any difficulties. 100% passing ensure is not hollow words and phrases. However, in the event you really dont get through the Cisco genuine certification exam, no matter what? purpose, we offer full funds back in the paying fees. Absolutely no questions asked!
2021 Jan latest ccie r&s dumps:
Q461. Which option is a core event publisher for EEM?
A. Timer
B. Policy Director
C. Applet
D. Script
Answer: A
Explanation:
EEM is a flexible, policy-driven framework that supports in-box monitoring of different components of the system with the help of software agents known as event detectors. The figure below shows the relationship between the EEM server, core event publishers (event detectors), and the event subscribers (policies). Basically, event publishers screen events and publish them when there is a match on an event specification that is provided by the event subscriber. Event detectors notify the EEM server when an event of interest occurs. The EEM policies that are configured using the Cisco command-line interface (CLI) then implement recovery on the basis of the current state of the system and the actions specified in the policy for the given event. EEM offers the ability to monitor events and take informational or corrective action when the monitored events occur or when a threshold is reached. An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration. A script is a form of policy that is written in Tool Command Language (Tcl).
Figure 1. Embedded Event Manager Core Event Detectors
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/configuration/15-mt/eem-15-mt-book/eem-overview.html
Q462. DRAG DROP
Drag and drop the multicast protocol or feature on the left to the correct address space on the right.
Answer:
Q463. Refer to the exhibit.
If the traffic flowing from network 192.168.254.0 to 172.16.250.0 is unencrypted, which two actions must you take to enable encryption? (Choose two).
A. Configure the transform-set on R2 to match the configuration on R1.
B. Configure the crypto map on R2 to include the correct subnet.
C. Configure the ISAKMP policy names to match on R1 and R2.
D. Configure the crypto map names to match on R1 and R2.
E. Configure the Diffie-Hellman keys used in the ISAKMP policies to be different on R1 and R2.
Answer: A,B
Explanation:
A transform set combines an encryption method and an authentication method. During the IPsec security association negotiation with ISAKMP, the peers agree to use a particular transform set to protect a particular data flow. The transform set must be the same for both peers. Also, the crypto map on R2 points to the address name of VPN, which includes 172.16.0.0/16, but it should be the local subnet of 192.168.0.0/16
Q464. Which three address family types does EIGRP support? (Choose three.)
A. IPv4 unicast
B. IPv4 multicast
C. IPv6 unicast
D. IPv6 multicast
E. IPv4 anycast
F. IPv6 anycast
Answer: A,B,C
Q465. Refer to the exhibit.
Which two statements about the R1 configuration are true? (Choose two.)
A. The IP TTL value is copied to the MPLS field during label imposition.
B. The structure of the MLPS network is hidden in a traceroute.
C. The LDP session interval and hold times are configured for directly connected neighbors.
D. R1 protects the session for 86400 seconds.
E. All locally assigned labels are discarded.
Answer: B,D
Updated 400-101 cisco ccie written:
Q466. Refer to the exhibit.
Why is the loopback 0 interface of R4 missing in the routing table of R2?
A. R2 is configured as a route reflector client.
B. There is no peering between R2 and R3.
C. The next hop is not reachable from R2.
D. The route originated within the same AS.
Answer: B
Explanation:
In the “show ip bgp” output we see that there is no peering session between R2 and R3. Since R3 is the route reflector here, R3 would reflect routes advertised from R4 to R2, but the peer needs to be established first.
Q467. Which two solutions can reduce UDP latency? (Choose two.)
A. fast retransmission
B. fast recovery
C. fast start
D. low-latency queuing
E. IP service level agreements
F. congestion-avoidance algorithm
Answer: D,E
Explanation:
IP SLA uses active traffic monitoring, which generates traffic in a continuous, reliable, and predictable manner to measure network performance. IP SLA sends data across the network to measure performance between multiple network locations or across multiple network paths. It simulates network data and IP services, and collects network performance information in real time. This information is collected:
Response times
One-way latency, jitter (interpacket delay variance)
Packet loss
Network resource availability
LLQ uses the priority command. The priority command allows you to set up classes based on a variety of criteria (not just User Datagram Ports (UDP) ports) and assign priority to them, and is available for use on serial interfaces and ATM permanent virtual circuits (PVCs). A similar command, the ip rtp priority command, allows you to stipulate priority flows based only on UDP port numbers. Note: All the other answer choices can be used to improve TCP performance, but not UDP.
References: http://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r4-2/system_monitoring/configuration/guide/b_sysmon_cg42xr12k/b_sysmon_cg42xr12k_chapter_011.html http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fsllq26.html
Q468. Which two statements about route summarization are true? (Choose two.)
A. RIP, IGRP, and EIGRP can automatically summarize routing information at network address boundaries.
B. EIGRP can automatically summarize external routes.
C. The area range command can aggregate addresses on the ASBR.
D. The summary-address command under the router process configures manual summarization on RIPv2 devices.
E. The ip classless command enables classful protocols to select a default route to an unknown subnet on a network with other known subnets.
Answer: A,E
Q469. Refer to the exhibit.
Which BGP feature allows R1 to send R2 a list of prefixes that R2 is prevented from advertising to R1?
A. route refresh
B. Prefix-Based Outbound Route Filtering
C. distribute lists
D. prefix lists
Answer: B
Q470. Which three statements about GLBP are true? (Choose three.)
A. It uses a virtual MAC address that starts with 0007.b4.
B. It elects a single active virtual gateway to appoint and manage multiple active virtual forwarders.
C. It allows the configured virtual IP address to be used on a physical interface as well.
D. It uses a virtual MAC address that starts with 0070.4b.
E. It elects multiple active virtual gateways to appoint and manage a single active virtual forwarder.
F. Preemption is enabled for the configured active virtual gateway by default.
Answer: A,B,C
Explanation:
The virtual MAC address in GLBP is 0007.b400.xxyy where xx is the GLBP group number and yy is the different number of each gateway (01, 02, 03…). One of the routers in a GLBP group is elected as an AVG – Active Virtual Gateway. There is only one active AVG in a group, and its task is to respond to ARP requests sent to the virtual gateway IP address replying different virtual MAC addresses in response packets. GLBP allows the configured virtual IP address to be used on a physical interface. By default, the GLBP gateway preemptive scheme is disabled. A backup virtual gateway can become the AVG only if the current AVG fails, regardless of the priorities assigned to the virtual gateways.