Cisco Cisco 642-035 exam questions and answers update freely within 120 days. Your 642-035 test engine software may check along with download the updated Cisco study materials automatically for you. Our own professionals renovate the Cisco Cisco braindumps regularly and upgrade the actual 642-035 exam questions and answers instantly when new questions included with the Cisco genuine exam. You will find any kind of Cisco practice questions in our demos.

2021 Nov 642-035 dumps:

Q11. Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.) 

A. TFTP 

B. FTP 

C. SCP 

D. Telnet 

E. SecureTelnet 

Answer: BC 


Q12. For a KVM session to be successful, which two of these need to be done? (Choose two.) 

A. The Cisco IMC IP address needs to be assigned on the Admin tab. 

B. The Cisco IMC IP address needs to be in the same subnet as the management IP. 

C. The Cisco IMC needs to be upgraded to the same version as the UCS Manager. 

D. The server needs to be fully discovered. 

Answer: AD 


Q13. Which remote access protocol is used by default to obtain CLI access to a Cisco UCS C-Series standalone server? 

A. Telnet 

B. SSH 

C. HTTP 

D. SSL 

E. SOCKS 

Answer: B 


Q14. Which statement is true about system event logs? 

A. By default, they require manual clearing. 

B. They report operating system crashes and errors. 

C. They are also referred to as system error logs. 

D. They can only be accessed from Cisco UCS Manager. 

Answer: A 


Q15. RBAC is a method of restricting access for a particular user on which two of these? (Choose two.) 

A. roles 

B. realm 

C. locales 

D. RADIUS 

E. LDAP 

Answer: AC 


Down to date 642-035 certification:

Q16. You are troubleshooting an FCoE boot issue on a Cisco UCS C220 M3 server with a VIC 1225 CNA. Which two pieces of information can you directly infer from the output of the show zone active command below? (Choose two.) 

zone name Server_1-to-Storage vsan 11 

pwwn 50:06:01:60:3b:a0:08:9f [Storage] 

*fcid 0x3b000b [pwwn 20:00:00:25:b5:04:0a:02] [C22_Server] 

A. The storage controller is not logged into the fabric. 

B. The server is not logged into the fabric. 

C. Only the storage controller is logged into the fabric. 

D. Only the server is logged into the fabric. 

E. The initiator and target cannot communicate because they are on the wrong VSAN. 

F. The WWPN of the storage controller is mistyped. 

G. The initiator and target cannot communicate because the zone name does not match the server name (C22_Server). 

Answer: AD 


Q17. Which two types of ports does end host mode switching have? (Choose two.) 

A. VSS 

B. border 

C. router 

D. server 

E. STP 

F. client 

Answer: BD 


Q18. Which piece of information does the FSM provide? 

A. the current task and status 

B. a collection of blade statistics 

C. the last user to access the resource 

D. a list of faults currently suppressed by the Cisco UCS Manager 

Answer: A 


Q19. A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network. The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue? 

A. The MTU specified here must be greater than the MTU specified in the associated QoS system class. If this MTU value is less than the MTU value in the QoS system class, packets may be dropped during data transmission. 

B. The MTU specified here must be equal to or less than the MTU specified in the associated QoS system class. If this MTU value exceeds the MTU value in the QoS system class, packets may be dropped during data transmission. 

C. The MTU specified here must be less than the MTU specified in the associated QoS system policy. If this MTU value exceeds the MTU value in the QoS system policy, packets may be not be dropped during data transmission. 

D. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc. 

Answer: B 


Q20. Which actions on a Cisco UCS Server can be performed under the Cisco IMC utilities? (Choose Four.) 

A. export tech support information to a remote host 

B. download a tech support file locally 

C. reboot the Cisco IMC 

D. recover a corrupt BIOS 

E. install firmware updates 

Answer: ABCD