It is impossible to pass Microsoft 70-741 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed 70-741 dumps. You will get a surprising result by our 70-741 dumps.
Free demo questions for Microsoft 70-741 Exam Dumps Below:
NEW QUESTION 1
You have a RADIUS server named RADIUS1. RADIUS1 is configured to use an IP address of 172.23.100.101.
You add a wireless access point (wap) named WAP-Secure to your network. You configure WAP-Secure to use an IP address of 10.0.100.101.
You need to ensure that WAP-Secure can authenticate to RADIUS1 by using a shared secret key. What command should you run? To answer, select the appropriate options in answer area.
Answer:
Explanation: 
NEW QUESTION 2
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the graphic.
Answer:
Explanation: 
NEW QUESTION 3
You have a virtual machine named Server1 that runs Windows Server 2021.
You plan to use Server1 as part of a Software Defined Networking (SDN) solution.
You need to implement the Border Gateway Protocol (BGP) on Server1. What should you install?
- A. the peer Name Resolution Protocol (PNRP)feature
- B. the Routing role service
- C. the Network Device Enrollment Service role service
- D. the Network Policy and access Services server role
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/windows-server/remote/remote-access/bgp/border-gateway-protocol-bgp
NEW QUESTION 4
You have multiple servers that run Windows Server 2021.
You need to install the DNS Server server role on one of the servers. What should you run?
- A. dism.exe
- B. dns.exe
- C. dnscmd.exe
- D. netsh.exe
- E. Set-DhcpServerDatabase
- F. Set-DhcpServerv4DnsSetting
- G. Set-DhcpServerv6DnsSetting
- H. Set-DNSServerSetting
Answer: A
NEW QUESTION 5
You are deploying DirectAccess to a server named DA1. DA1 will be located behind a firewall and will have a single network adapter. The intermediary network will be IPv4.
You need to configure the firewall to support DirectAccess.
Which firewall rules should you create for each type of traffic? To answer, drag the appropriate ports and protocols to the correct traffic types. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation: 
NEW QUESTION 6
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host. You run the commands shown in the following graphic:
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
Explanation: 
NEW QUESTION 7
You are implementing a secure network. The network contains a DHCP server named Server1 that runs Windows Server 2021.
You create a DHCP allow filter that contains all of the computers on the network that are authorized to receive IP addresses.
You discover that unauthorized computers can obtain an IP address from Server1.
You need to ensure that only authorized computers can receive an IP address from Server1. Solution: You run the following command.
Add-DHCPServer4Filter -ComputerName Server1 -MacAddress -List Deny
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/dhcpserver/add-dhcpserverv4filter?view=win10-ps
NEW QUESTION 8
You have a Microsoft Azure subscription and an on-premises network.
To the on-premises network, you deploy a new server named Server1 that runs Windows Server 2021. In Azure, you configure a virtual gateway on an Azure virtual network.
You need to ensure that the computers on the on-premises network can access virtual machines on the Azure virtual network.
What should you do on Server1?
- A. Install the Remote Access server rol
- B. From the Routing and Remote Access Server Setup Wizard, select Secure connection between two private networks.
- C. Install the Data Center Bridging (DCB) feature, and then run the Install-RemoteAccess cmdlet.
- D. Install the Remote Access server rol
- E. From the Routing and Remote Access Server Setup Wizard, select Virtual private network (VPN) access and NAT.
- F. Install the Data Center Bridging (DCB) feature, and then run the E nable-RemoteAccessRoutingDomain cmdlet.
Answer: A
NEW QUESTION 9
You have Hyper-V host named Server1. Serve1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an Ipv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
What should you do?
- A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
- B. From Windows PowerShell on VM1, run the Enable-NetAdapterRSS cmdlet.
- C. From Windows PowerShell on Server1, run the Enable-NetAdapterPacketDirect cmdlet.
- D. From Windows PowerShell on VM1, run the Enable-NetAdapterPacketDirect cmdlet.
Answer: B
NEW QUESTION 10
You have a server named Server1 that runs Windows Server 2021.
Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network.
You need to enable a user named TECH1 to create pointer (PTR), host (A) and service location (SRV) records on all of the DNS servers on the network.
What should you do on Server1?
- A. From the IPAM node in Server Manager, assign the IPAM DNS Administrator Role to TECH1 and create a new access scope.
- B. Run the Set-IpamRange cmdlet, and then run the Set-IpamAccessScope cmdlet.
- C. From the IPAM node in Server Manager, create a new user role and a new access policy.
- D. Run the Set-IpanCustomFiels cmdelt, and then run the Set-IpamAddressSpace cmdlet.
Answer: A
Explanation: References:
https://docs.microsoft.com/en-us/windows-server/networking/technologies/ipam/view-roles-and-role-permission
NEW QUESTION 11
You have a DHCP server named Server1.
Server1 has an IPv4 scope that serves 75 client computers that run Windows 10.
When you review the address leases in the DHCP console, you discover several leases for devices that you do not recognize.
You need to ensure that only the 75 Windows 10 computers can obtain a lease from the scope. What should you do?
- A. Run the Add-DhcpServerv4ExclusionRange cmdlet.
- B. Create and enable a DHCP filter.
- C. Create a DHCP policy for the scope.
- D. Run the Add-DhcpServerv4OptionDefinition cmdlet.
Answer: A
Explanation: References: https://technet.microsoft.com/en-us/library/jj590721(v=wps.630).aspx
NEW QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 than run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.
A domain user named User1 is a member of the groups shown in the following table.
Which actions can User1 perform? To answer, select the appropriate options in the answer area.
Answer:
Explanation: https://technet.microsoft.com/en-us/library/jj878351(v=ws.11).aspx#SM_menu https://technet.microsoft.com/en-us/library/dd183605(v=ws.10).aspx
NEW QUESTION 13
You have multiple servers that run Windows Server 2021.
The DNS Server server role is installed on a server named Server1.
You need to configure Server1 to use a DNS forwarder that has an IP address of 192.168.10.15. What should you run?
- A. dism.exe
- B. dns.exe
- C. dnscmd.exe
- D. netsh.exe
- E. Set-DhcpServerDatabase
- F. Set-DhcpServerv4DnsSetting
- G. Set-DhcpServerv6DnsSetting
- H. Set-DNSServerSetting
Answer: C
NEW QUESTION 14
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.
You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?
- A. New-NetNeighbor
- B. New-NetRoute
- C. Set-NetTcpSetting
- D. Set-NetNeighbir
Answer: B
NEW QUESTION 15
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has two network adapters that are Remote Direct Memory Access (RDMA)-enabled.
You need to verify whether Switch Embedded Teaming (SET) is enabled. Which cmdlet should you use?
- A. Get-NetworkSwitchFeature
- B. Get-VMNetworkAdapter
- C. Get-VMSwitch
- D. Get-VMNetworkAdapterFailoverConfiguration
Answer: C
NEW QUESTION 16
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of the repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.
End of the repeated scenario
You need to ensure that when computers query for records in tailspintoys.com, the query results are based on the subnet of the computer that generates the query.
What should you do?
- A. Enable DNS round robin.
- B. Configure DNS policies.
- C. Create zone delegation records.
- D. Modify the Priority settings of each resource record.
Answer: B
NEW QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of the servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation: https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamdiscoverydomain https://technet.microsoft.com/itpro/powershell/windows/ipam/add-ipamserverinventory https://technet.microsoft.com/itpro/powershell/windows/ipam/invoke-ipamserverprovisioning
NEW QUESTION 18
You have a DNS server named Server1 that runs Windows Server 2021. Server1 has two Active Directory-integrated zones named contoso.com and adatum.com.
All client computers run Windows 10.
Server1 recently experienced millions of erroneous DNS queries causing a denial of service.
You need to reduce the likelihood that a similar attack will cause a denial of service. The solution must ensure that Server1 continues to resolve names for clients.
What should you do?
- A. Sign both adatum.com and contoso.com zones.
- B. Implement DNS-based Authentication of named Entities (DANS).
- C. Configure DNS policies on Server1.
- D. Enable Response Rate Limiting (RRL) on Server1.
Answer: D
P.S. Easily pass 70-741 Exam with 235 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 70-741 Dumps: https://www.2passeasy.com/dumps/70-741/ (235 New Questions)