We offers 70-741 exam. "Networking with Windows Server 2021", also known as 70-741 exam, is a Microsoft Certification. This set of posts, Passing the 70-741 exam with 70-741 exam, will help you answer those questions. The 70-741 exam covers all the knowledge points of the real exam. 100% real 70-741 dumps and revised by experts!
Online Microsoft 70-741 free dumps demo Below:
NEW QUESTION 1
Refer to Exhibit:
You plan to implement a VPN. FabRA1 will use the RADIUS proxy for authentication.
You need to ensure that VPN clients can be authenticated and can access internal resources. The solution must ensure that FabRS1 is used as a RADIUS server and FabRPl is used as a RADIUS proxy.
Which two actions should you perform? Each correct answer presents part of the solution.
- A. Create a connection request policy on FabRSl.
- B. Create a connection request policy on FabRPl.
- C. Create a network policy on FabRSl.
- D. Delete the default connection request policy on FabRSl.
- E. Create a network policv on FabRPl.
Answer: BC
NEW QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2021.
You have a DHCP scope for the 10.0.0.0/24 IP subnet. One hundred and fifty clients reside in the subnet. Fifty of the DHCP clients are NOT domain-joined.
You need to ensure that DHCP clients without a configured DNS suffix register automatically in a DNS zone named workgroup.contoso.com. The other DHCP clients must register in the DNS zone of their respective domain.
What should you do?
- A. Configure the DNS properties of the 10.0.0.0/24 DHCP scope.
- B. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the IP address range properties of the policy.
- C. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the DNS properties of the policy.
- D. Configure the 015 DNS Domain Name scope option in the 10.0.0.0/24 DHCP scope.
Answer: C
NEW QUESTION 3
You are implementing IPv6 addressing for your company by using the following specifications:
The global address space is 2001:db8:1234. The company has 100 locations worldwide. Each location has up to 300 subnets. 64 bits will be used for hosts.
You need to identify how many bits to use for the locations and the subnets.
How many bits should you identify? To answer, drag the appropriate amounts to the correct targets. Each amount may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. IPAM users a Windows Internal Database. You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.
Answer:
Explanation: 
NEW QUESTION 5
You implement Software Defined Networking (SDN) by using the network Controller server role. You have a virtual network named VNET1 that contains servers used by developers.
You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1.
What should you configure?
- A. a network security group (NSG)
- B. role-based access control
- C. a universal security group
- D. Dynamic Access Control
Answer: A
NEW QUESTION 6
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment.
Server1 has an IPv4 scope named Scope1.
You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1.
What should you do?
- A. From the properties of Scope1, modify the Conflict detection attempts setting.
- B. From the properties of Scope1, configure Name Protection.
- C. From the properties of IPv4, configure the bindings.
- D. From IPv4, create a new filter.
- E. From the properties of Scope1, create an exclusion range.
- F. From IPv4, run the DHCP Policy Configuration Wizard.
- G. From Control Panel, modify the properties of Ethernet.
- H. From Scope1, create a reservation.
Answer: C
Explanation: https://technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx
NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/netadapter/get-netadaptersriov?view=win10-ps
NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit.
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You authorize the server. Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION 9
You have three servers named Server1, Server2, and Server3 that run Windows Server 2021. On all three servers, Windows Firewall is configured to allow ICMP traffic. Server2 has two network adapters named NIC1 and NIC2.
Your network is configured as shown in the exhibit. (Click the Exhibit button.)
The parameters for NIC2 on Server1 are shown in the following output.
Which ping request will result in a reply from the destination host?
- A. From Server2, ping 192.168.15.1
- B. From Server3, ping 192.168.15.1
- C. From Server1, ping 172.16.0.1
- D. From Server1, ping 172.16.0.35
Answer: A
NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a network administrator for a company named Contoso, Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2. Server2 has the following configured: 
Network address translation (NAT) The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to Server2. You identify the following requirements: Add 28 devices to subnet2 for a temporary project. Configure Server2 to accept VPN connections from the internet. Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. Which VPN protocol should you configure on Server2?
- A. L2TP
- B. IKEv2
- C. PPTP
- D. SSTP
Answer: C
NEW QUESTION 11
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 are connected to the same network.
On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machine shown in the following table.
All three virtual machines are connected to Switch1.
You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.
What should you do?
- A. Configure network virtualization for VM1 and VM2.
- B. Modify the subnet mask of VM1 and VM2.
- C. On Server2, configure the VLAN ID setting of Switch1.
- D. On Server2, create an external switch and connect VM3 to the switch.
Answer: A
Explanation: https://blogs.technet.microsoft.com/networking/2021/10/26/network-virtualization-with-ws2021-sdn/
NEW QUESTION 12
You have a server named Server1 that runs Windows Server 2021. You install the Hyper-V server role on Server1. Server1 has eight network adapters that are dedicated to virtual machines. The network adapters are Remote Direct Memory Access (RDMA)-enabled.
You plan to use Software Defined Networking (SDN). You will host the virtual machines for multiple tenants on the Hyper-V host.
You need to ensure that the network connections for the virtual machines are resilient if one or more physical network adapters fail.
What should you implement?
- A. single root I/O virtualization (SR-IOV)
- B. NIC Teaming on the Hyper-V host
- C. virtual Receive-side Scaling (vRSS)
- D. Switch Embedded Teaming (SET)
Answer: D
NEW QUESTION 13
You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)
The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation: https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx
NEW QUESTION 14
You have multiple subnets.
On one of the subnets, you install a server named Server1 that runs Windows Server 2021. Server1 has the following IPv6 addresses:
ff00:e378:8000::63bf:3fff:fdd2 fe80::200:5aee:feaa:20a2 fc00:fdf8:f53b:82e4::53 2000:1516::6c:2348
Which IPv6 address is used when Server1 communicates with different hosts? To answer, select the appropriate options in the answer area.
Answer:
Explanation: References: https://technet.microsoft.com/pt-pt/library/cc757359(v=ws.10).aspx
NEW QUESTION 15
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has multiple network adapters that have virtual machine queue (VMQ) enabled.
On Server1, you create a virtual machine named VM1 as shown in the exhibit.
You need to ensure that you can use virtual Receive-side Scaling (vRSS) on VM1.
What should you do?
- A. Add additional memory.
- B. Add additional processors.
- C. Add additional network adapters.
- D. Enable the Data Exchange integration service.
Answer: B
Explanation: References: https://docs.microsoft.com/en-us/windows-server/networking/technologies/vrss/vrss-top
NEW QUESTION 16
Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2021. All of the VPN connections use certificate-based authentication and are subject to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.
All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).
You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?
- A. Manage the DNS zones on the DNS servers.
- B. Audit logon events on the RDS server.
- C. Audit authentication events from DC1.
- D. Manage activations on the KMS server.
Answer: C
NEW QUESTION 17
Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named Radius1 that runs Windows Server 2021.
You need to create a new connection request policy that will allow only Secure Socket Tunneling Protocol (SSTP) connections. Radius1 will manage all authentication requests.
Which NAS port type and which authentication method should you configure in the connection request policy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 18
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.
The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)
The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation: 
100% Valid and Newest Version 70-741 Questions & Answers shared by Surepassexam, Get Full Dumps HERE: https://www.surepassexam.com/70-741-exam-dumps.html (New 235 Q&As)