Exambible H12-811_V1.0 Questions are updated and all H12-811_V1.0 answers are verified by experts. Once you have completely prepared with our H12-811_V1.0 exam prep kits you will be ready for the real H12-811_V1.0 exam without a problem. We have Most up-to-date HUAWEI H12-811_V1.0 dumps study guide. PASSED H12-811_V1.0 First attempt! Here What I Did.
Also have H12-811_V1.0 free dumps questions for you:
NEW QUESTION 1
Three Layer 2 switches are interconnected with one HUB. The switches are all enabled with STP bridge ID. Refer to the figure below. What are the default errors of other configurations? () (Single-choice question)
- A. The two ports on SWA are designated ports and are in the forwarding state
- B. G0/0/2 of SWA is blocked
- C. G0/0/1 of SWC is alternativ
- D. It is in blocking state
Answer: B
NEW QUESTION 2
When the device running STP receives the RSTP configuration BPDU, it will discard it. ()
- A. True
- B. False
Answer: A
NEW QUESTION 3
Compared with STP, which of the following port roles are newly defined in RSTP? ()*
- A. Designated port
- B. Root port
- C. Alternate port
- D. Backup port
Answer: CD
NEW QUESTION 4
The output information of the router is shown in the figure. Which of the following statements is wrong? () (Single-choice question)
- A. The broadcast address corresponding to the AEthernet0/0/0 interface is 10.0.12.255 B.The physical link of the Ethernet0/0/0 interface is normal
- B. Ethernet0/0/0 interfaceThe MTU value is 1480
- C. Ethernet (The IP address of the /0/0 interface is 10.0.12.1/24
Answer: C
NEW QUESTION 5
As shown in the figure below. Host A and Host B cannot communicate. ()(True or False)
- A. True
- B. False
Answer: B
NEW QUESTION 6
What is the maximum negotiation rate supported by the IEEE802.11g standard? ()
- A. 150Mbps
- B. 54Kbps
- C. 1200Mbps
Answer: C
NEW QUESTION 7
The information shown in the figure is the port status information displayed on a switch running STP. According to this information, what is wrong in the following description? () (Single-choice question)
- A. B.The priority of this switch is 0
- B. C.This network may only contain this switch
- C. This switch may be connected to 6 other switches
Answer: B
NEW QUESTION 8
In the broadcast network, OSPF runs on four routers in the same area and on the same network segment. OSPF will automatically elect one DR and multiple BDRs to achieve a better backup effect ()
- A. True
- B. False
Answer: B
NEW QUESTION 9
In the RSTP standard, in order to improve the convergence speed, the port that the switch is directly connected to the terminal can be defined as ()
- A. Edge port
- B. Root port
- C. Fast port
- D. Backup port
Answer: A
NEW QUESTION 10
By default, the bridge priority of Huawei switches is 32768 ()
- A. True
- B. False
Answer: A
NEW QUESTION 11
Which version of the SNMP protocol below supports encryption features? ()
- A. SNMPv3
- B. SNMPv2c
- C. SNMPv1
- D. SNMPv2
Answer: A
NEW QUESTION 12
* 192.168.1.127 /25 represents () address ()
- A. broadcast
- B. Multicast
- C. The internet
- D. Host
Answer: A
NEW QUESTION 13
The network structure and OSPF partition are shown in the figure. Except for RTA in the figure, the routers RTB, RTC and RTD are all ABR routers. ()(True or False)
- A. True
- B. False
Answer: B
NEW QUESTION 14
Which of the following statements about the election of DR and BDR are correct? ()*
- A. BDR must exist in broadcast networks
- B. If the priority is the same, compare the Router ID, the larger the value, the more preferred to be elected as the DR
- C. DR must exist in broadcast networks
- D. If the priority of an interface is, the interface will not participate in the election of DR or BDR
Answer: BCD
NEW QUESTION 15
The administrator plans to implement route backup by configuring static floating routes. The correct way to achieve this is ()
- A. The administrator needs to configure different metric values for the main static route and the standby static route
- B. The administrator needs to configure different TAGs for the main static route and the standby static route
- C. The administrator only needs to configure two static routes
- D. The administrator needs to configure different protocol priority values for the main static route and the standby static route
Answer: D
NEW QUESTION 16
Which of the following statements about IPv6 anycast addresses are correct? ()*
- A. Anycast address and unicast address use the same address space
- B. Provide additional functions for the service
- C. The packet whose destination address is the anycast address will be sent to the nearest network interface in the sense of routing
- D. Realize service load sharing
Answer: ABC
NEW QUESTION 17
Telnet.read in TelnetliB._The role of all() is to read all data until EOF. If the echo does not return EOF, it will always block ()
- A. True
- B. False
Answer: A
NEW QUESTION 18
Which of the following protocols does the RA. message used by IPv6 stateless autoconfiguration belong to? ()
- A. ICMPv6
- B. UDPv6
- C. TCPv6
Answer: B
NEW QUESTION 19
......
Recommend!! Get the Full H12-811_V1.0 dumps in VCE and PDF From Downloadfreepdf.net, Welcome to Download: https://www.downloadfreepdf.net/H12-811_V1.0-pdf-download.html (New 730 Q&As Version)