♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Red Hat RH302 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW RH302 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/RH302-exam-dumps.html

Q101. CORRECT TEXT

Install the Redhat Linux RHEL 5 through NFS. Where your Server is server1.example.com having IP 172.24.254.254 and shared /var/ftp/pub. The size of the partitions are listed below:

/ à 1048

/home à 1028

/boot à 512

/var à 1028

/usr à 2048

Swap -> 1.5 of RAM Size

/archive à configure the RAID Level 0 of remaining all free space.

After completing the installation through NFS solve the following questions. There are two networks 172.24.0.0/16 and 172.25.0.0/16. As well as there are two domains example.com on 172.24.0.0/16 network and my133t.org on 172.25.0.0/16 network. Your system is based on example.com domain. SELinux must be in enforcing mode.

Answer and Explanation:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt type linux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Create the two RAID partitions having equal size of remaining all free space.

11. Click on RAID button

12. Type mount point /archive

13. Select RAID Level 0

14. Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.


Q102. CORRECT TEXT

You have a domain in your LAN named example.com and my133t.org. Allow the

- Allow the FTP connection only from local domain.

- Deny the FTP connection from my133t.org

Answer and Explanation:

1. vi /etc/hosts.deny

vsftpd:ALL EXCEPT .example.com

or

1. vi /etc/hosts.deny

vsftpd:ALL

2. vi /etc/hosts.allow

vsftpd:.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

- Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation.

Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.


Q103. CORRECT TEXT

Create the user named eric but eric should not belong to the sysadmin group.

Answer and Explanation:

1. useradd eric

Very tricky question given to you that this user should not belongs to sysadmin group.


Q104. CORRECT TEXT

Install the Redhat Linux RHEL 4 through NFS. Where your Server is server1.example.com having IP 172.24.254.254 and shared /var/ftp/pub. The size of the partitions are listed below:

/ à 1048

/home à 1028

/boot à 512

/var à 1028

/usr à 2048

Swap -> 1.5 of RAM Size

/data à configure the RAID Level 0 of remaining all free space.

After completing the installation through NFS solve the following questions. There are two networks 172.24.0.0/16 and 172.25.0.0/16. As well as there are two domains example.com on 172.24.0.0/16 network and cracker.org on 172.25.0.0/16 network. Your system is based on example.com domain.

Answer and Explanation:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt type linux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Create the two RAID partitions having equal size of remaining all free space.

11. Click on RAID button

12. Type mount point /data

13. Select RAID Level 0

14. Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.


Q105. CORRECT TEXT

There is a NFS server 192.168.0.254 and all required packages are dumped in /var/ftp/pub of that server and the /var/ftp/pub directory is shared. Install the Redhat Enterprise Linux 5 by creating following partitions:

/ 1000

/boot 200

/home 1000

/var 1000

/usr 4000

swap 2X256 (RAM SIZE)

Answer and Explanation:

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt type linux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 192.168.0.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.


Q106. CORRECT TEXT

You have ftp site named ftp.example.com. You want to deny login as an anonymous on your ftp site. Configure to deny the anonymous.

Answer and Explanation:

1. vi /etc/vsftpd/vsftpd.conf

anonymous_enable=no

2. service vsftpd restart

/etc/vsftpd/vsftpd.conf file is used to allow or deny to anonymous or real user. To allow anonymous anonymous_enable=yes should be there. Sample configuration is like.

# Allow anonymous FTP? (Beware - allowed by default if you comment this out).

anonymous_enable=YES

#

# Uncomment this to allow local users to log in.

local_enable=YES

#

# Uncomment this to enable any form of FTP write command.

write_enable=YES

#

# Default umask for local users is 077. You may wish to change this to 022,

# if your users expect that (022 is used by most other ftpd's)

local_umask=022

#

# Uncomment this to allow the anonymous FTP user to upload files. This only

# has an effect if the above global write enable is activated. Also, you will

# obviously need to create a directory writable by the FTP user.

#anon_upload_enable=YES

#

# Uncomment this if you want the anonymous FTP user to be able to create

# new directories.

#anon_mkdir_write_enable=YES

#

# Activate directory messages - messages given to remote users when they

# go into a certain directory.

dirmessage_enable=YES

#

# Activate logging of uploads/downloads.

xferlog_enable=YES

#

# Make sure PORT transfer connections originate from port 20 (ftp-data).

connect_from_port_20=YES

#

# If you want, you can arrange for uploaded anonymous files to be owned by

# a different user. Note! Using "root" for uploaded files is not

# recommended!

#chown_uploads=YES

#chown_username=whoever

#

# You may override where the log file goes if you like. The default is shown

# below.

#xferlog_file=/var/log/vsftpd.log

#

# If you want, you can have your log file in standard ftpd xferlog format

xferlog_std_format=YES

#

# You may change the default value for timing out an idle session.

#idle_session_timeout=600

#

# You may change the default value for timing out a data connection.

#data_connection_timeout=120

#

# It is recommended that you define on your system a unique user which the

# ftp server can use as a totally isolated and unprivileged user.

#nopriv_user=ftpsecure

#

# Enable this and the server will recognise asynchronous ABOR requests. Not

# recommended for security (the code is non-trivial). Not enabling it,

# however, may confuse older FTP clients.

#async_abor_enable=YES

#

# By default the server will pretend to allow ASCII mode but in fact ignore

# the request. Turn on the below options to have the server actually do ASCII

# mangling on files when in ASCII mode.

# Beware that turning on ascii_download_enable enables malicious remote parties

# to consume your I/O resources, by issuing the command "SIZE /big/file" in

# ASCII mode.

# These ASCII options are split into upload and download because you may wish

# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),

# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be

# on the client anyway..

#ascii_upload_enable=YES

#ascii_download_enable=YES

#

# You may fully customise the login banner string:

#ftpd_banner=Welcome to blah FTP service.

#

# You may specify a file of disallowed anonymous e-mail addresses. Apparently

# useful for combatting certain DoS attacks.

#deny_email_enable=YES

# (default follows)

#banned_email_file=/etc/vsftpd.banned_emails

#

# You may specify an explicit list of local users to chroot() to their home

# directory. If chroot_local_user is YES, then this list becomes a list of

# users to NOT chroot().

#chroot_list_enable=YES

# (default follows)

#chroot_list_file=/etc/vsftpd.chroot_list

#

# You may activate the "-R" option to the builtin ls. This is disabled by

# default to avoid remote users being able to cause excessive I/O on large

# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume

# the presence of the "-R" option, so there is a strong case for enabling it.

#ls_recurse_enable=YES

pam_service_name=vsftpd

userlist_enable=YES

#enable for standalone mode

listen=YES

tcp_wrappers=YES


Q107. CORRECT TEXT

Run the squid proxy server on port 8080 by allowing internet access to 192.168.0.0/24 and block msn.com site to access.

Answer and Explanation:

1. vi /etc/squid/squid.conf

#detault:

http_port 8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl msnnet dstdomain .msn.com

#Default:

# http_access deny all

#Under Here

http_access deny msnnet

http_access allow allownet

2. service squid start

3. chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

To block or allow the Internet access to hosts, we should create the acl (Access Control List). In this file we can specify only the IP address.

Example: acl aclname src IP/Netmask

After creating acl we can block or allow the Internet to specified acl.

http_access allow | deny alcname


Q108. CORRECT TEXT

Create the directory /storage and group owner should be the sysusers group.

Answer and Explanation:

1. chgrp sysusers /storage

2. Verify using ls -ld /storage command. You should get like

drwxr-x--- 2 root sysusers 4096 Mar 16 17:59 /storage

chgrp command is used to change the group ownership of particular files or directory.

Another way you can use the chown command.

chown root:sysusers /storage


Q109. CORRECT TEXT

Boot your System Successfully on runlevel 3.

Answer and Explanation:

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.


Q110. CORRECT TEXT

One Package named zsh is dump on ftp://server1.example.com under pub directory. Install the package from ftp server.

Answer and Explanation:

1. rpm -ivh ftp://server1.example.com/pub/zsh-*

2. Package will install

rpm command is used to install, update and remove the package, -i means install, -v means verbose and -h means display the hash mark.