Proper study guides for 300-175 DCUCI Implementing Cisco Data Center Unified Computing (DCUCI) certified begins with preparation products which designed to deliver the by making you pass the 300-175 test at your first time. Try the free right now.

Online Cisco 300-175 free dumps demo Below:

NEW QUESTION 1
Drag and drop the fabric interconnect characteristics on the left to the correct Ethernet switching modes on the right.
300-175 dumps exhibit

    Answer:

    Explanation: Egress server traffic can use more than one uplink port = End-Host Mode
    The fabric interconnect denies forwarded traffic between the uplink ports = Switch mode The fabric interconnect runs STP = Switch Mode
    vNic are pinned to the uplink ports = End-Host Mode

    NEW QUESTION 2
    Which adapter is capable of supporting VM-FEX?

    • A. VIC 1280
    • B. Cisco UCS M61KR-I
    • C. Cisco UCS M72KR
    • D. Cisco UCS M51KR-B

    Answer: A

    Explanation: Topic 3, Exam Set 2

    NEW QUESTION 3
    300-175 dumps exhibit
    300-175 dumps exhibit

      Answer:

      Explanation: 1

      NEW QUESTION 4
      Which VMware ESXi 5.0 CLI command will validate PassThru interfaces when they are available?

      • A. vem status -v
      • B. vempassthru-v
      • C. vemintf -v
      • D. vemifconfig -v
      • E. vempts -v

      Answer: A

      NEW QUESTION 5
      Which statement about fabric failover for Fibre Channel communication is true?

      • A. You can enable hardware Fibre Channel failover.
      • B. Cisco UCS load balances Fibre Channel traffic between the two fabrics.
      • C. You must use a Fibre Channel multipath I/O driver.
      • D. You do not have to use anything.

      Answer: C

      Explanation: Reference:
      https://supportforums.cisco.com/t5/unified-computing-system/san-multi-pathing-best-practices/td-p/1545645 https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/unified-computing-system/116471-confi https://kb.netapp.com/support/s/article/how-to-verify-windows-fibre-channel-configurations-with-multipathing-i

      NEW QUESTION 6
      Which two are true with respect to the unified ports on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)

      • A. The port mode is automatically discovered after plugging in a LAN or Fibre Channel-attached cable.
      • B. By default, unified ports that are changed to Ethernet port mode are set to uplink Ethernet port type.
      • C. Ethernet ports must be grouped together in a block and must start with the first port and end with an odd numbered port.
      • D. After making Ethernet and Fibre Channel ports is supported on the expansion module.
      • E. After making port mode changes on an expansion module, the module will reboot.
      • F. In a standalone configuration, making port mode changes to the fixed module will not cause the fabric interconnect to reboot.

      Answer: CE

      NEW QUESTION 7
      300-175 dumps exhibit

        Answer:

        Explanation: 300-175 dumps exhibit

        NEW QUESTION 8
        300-175 dumps exhibit

          Answer:

          Explanation: 300-175 dumps exhibit

          NEW QUESTION 9
          Refer to the exhibit.
          300-175 dumps exhibit
          Which two action do you perform on the remote switch before you run the commands? 9Choose two)

          • A. Configure a minimum of eight links in the port channel.
          • B. Configure the remote switch to use NPIV mode.
          • C. Set port channel mode to on.
          • D. Configure the remote switch for NPV.
          • E. Enable the port-channel-trunk feature.

          Answer: BC

          NEW QUESTION 10
          300-175 dumps exhibit

            Answer:

            Explanation: 300-175 dumps exhibit

            NEW QUESTION 11
            Which option describes what Cisco Integrated Management Controller Network Security provides?

            • A. protection against DDoS on the Cisco IMC
            • B. a whilelist that specifies the servers allowed to access the Cisco IMC
            • C. 802.1x support, allowing the Cisco IMC to log in to a port security network
            • D. user-configured ACLs to block known bad servers from accessing the Cisco IMC

            Answer: A

            NEW QUESTION 12
            You plan to implement FCoE on a Cisco UCS -Series server. Which option must you configure from the Cisco Integrated Management Controller GUI?

            • A. a vNIC failover
            • B. a boot table entry
            • C. NIV
            • D. FIP mode

            Answer: D

            Explanation: Reference:
            http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-21/b_Cisco_UCS_CSerie
            _1/Cisco_UCS_CSeries_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_1_chapter9.ht

            NEW QUESTION 13
            You need to configure a new Fibre Channel port channel from the Cisco UCS Manager GUI. To do this, from the SAN tab, you navigate to SAN Cloud > Fabric A or B > FC Port Channels, and you click the plus sign. In the popup window, you specify the Fibre Channel port channel name and ID.
            Which two rules should you follow when you set the Fibre Channel port channel name and ID? (Choose two.)

            • A. The Name field must be a number.
            • B. The ID field can contain ASCII characters, except for spaces.
            • C. The Name field is optional, but it cannot contain spaces.
            • D. TheFibre Channel port channel ID is optional.
            • E. TheFibre Channel port channel ID must be a number.

            Answer: CE

            Explanation: The identifier for the port channel.
            Enter an integer between 1 and 256. This ID cannot be changed after the port channel has been saved. Name field A user-defined name for the port channel.
            This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), _ (underscore), : (colon), and . (period), and you cannot change this name after the object has been saved.
            The Fibre Channel port channel ID is NOT optional
            The ID field CANNOT contain ASCII characters, OR spaces. The Name field must be a number IS NOT CORRECT.
            The Fibre Channel port channel ID must be a number. IS CORRECT The Name field is optional, but it cannot contain spaces. IS CORRECT
            The name field is optional (notice the "Next >" button is available when the name field is empty.

            NEW QUESTION 14
            300-175 dumps exhibit
            300-175 dumps exhibit

              Answer:

              Explanation: to allow local management of the cluster to be configured.

              NEW QUESTION 15
              Which three items represent some of the components to implement Cisco VM-FEX for Cisco Unified Computing System Manager B-Series blades? (Choose three.)

              • A. Cisco VSM VM
              • B. VEM installed on the VMware vCenter server
              • C. VEM in the VMware ESX or ESXi host
              • D. Cisco Unified Computing System Manager version 1.2 or higher
              • E. VMware vCenter server
              • F. Fibre Channel VMFS volume

              Answer: CDE

              NEW QUESTION 16
              You have a Cisco UCS B200 M2 server configured with 12 4-GBDDR3 1333-MHz dual-voltage memory DIMMs. You learned that the server memory speed is running at 1066 MHz instead. How can you configure the server to run at maximum memory speed?

              • A. You cannot configure memory speed of 1333 MH
              • B. The maximum memory speed of a Cisco UCS B200 M2 server with 12 4-GBDIMM is 1066 MHz.
              • C. Memory speed of the ESX host is configurable on VMware vCenter.
              • D. Create a BIOS polic
              • E. In the RAS Memory BIOS settings, select Performance Mode for LV DDR Mode.
              • F. On the CIMC of the Cisco UCS B200 M2, select 1333 MHz in the Memory Speed option.

              Answer: C

              NEW QUESTION 17
              Which four physical connections on a fabric interconnect are needed to perform the initial system setup for a cluster configuration? (Choose four.)

              • A. Ethernet uplink ports connected to upstream switch
              • B. console port connected to a computer terminal or console server.
              • C. Layer 1 ports on both fabric interconnects connected to each other
              • D. Layer 1 port of the first fabric interconnect connected to Layer 2 port of the second fabric interconnect
              • E. Layer 2 ports on both fabric interconnects connected to each other
              • F. Fibre Channel uplink ports connected to upstream fabric switch
              • G. management Ethernet port (mgmt0) connected to external switch or router
              • H. port channel to each fabric interconnect

              Answer: BCEG

              NEW QUESTION 18
              Refer to the exhibit.
              300-175 dumps exhibit
              Which result of the configuration is true?

              • A. The usNIC replaces any vNICs in the server.
              • B. The kernel is bypassed when sending networking packets.
              • C. Device-specific DMA translations are cached on the fabric interconnect only
              • D. All network traffic goes to the OS kernel directly.

              Answer: D

              100% Valid and Newest Version 300-175 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/300-175/ (New 349 Q&As)