Exam Code: 400 101 ccie (Practice Exam Latest Test Questions VCE PDF)
Exam Name: CCIE Routing and Switching (v5.0)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass cisco 400 101 Exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-101-exam-dumps.html
Q371. What is the function of the command ip pim autorp listener?
A. It allows a border PIM sparse mode router to accept autorp information from another autonomous system.
B. It allows the mapping agents to accept autorp information from the PIM rendezvous point.
C. It allows the routers to flood the autorp information in a sparse-mode-only network.
D. It allows a BSR to accept autorp information and translate it into BSR messages.
Answer: C
Explanation:
To cause IP multicast traffic for the two Auto-RP groups 224.0.1.39 and 224.0.1.40 to be Protocol Independent Multicast (PIM) dense mode flooded across interfaces operating in PIM sparse mode, use the ip pim autorp listener command in global configuration mode. To disable this feature, use the no form of this command.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti/command/imc-cr-book/imc_i3.html#wp3085748429
Q372. DRAG DROP
Drag and drop the Metro Ethernet circuit on the left to the corresponding Service Type category on the right.
Answer:
Q373. Which statement describes what it means if a router has an OSPF priority set to 0?
A. A router with the OSPF priority set to 0 is one that can participate in the election of a DR. It has the highest priority.
B. A router with the OSPF priority set to 0 is one that cannot participate in the election of a DR, but it can become a BDR
C. A router with the OSPF priority set to 0 is one that cannot participate in the election of a DR. It can become neither a DR nor a BDR.
D. A router with the OSPF priority set to 0 is one that cannot participate in the election of a BDR, but it can become a DR
Answer: C
Q374. Refer to the exhibit.
Which two statements are true? (Choose two.)
A. This router is not 4-byte autonomous system aware.
B. This router is 4-byte autonomous system aware.
C. The prefix 10.100.1.1/32 was learned through an autonomous system number with a length of 4 bytes, and this router is 4-byte autonomous system aware.
D. The prefix 10.100.1.1/32 was learned through an autonomous system number with a length of 4 bytes, and this router is not 4-byte autonomous system aware.
E. The prefix 10.100.1.1/32 was originated from a 4-byte autonomous system.
Answer: A,D
Explanation:
Prior to January 2009, BGP autonomous system (AS) numbers that were allocated to companies were 2-octet numbers in the range from 1 to 65535 as described in RFC 4271, A Border Gateway Protocol 4 (BGP-4). Due to increased demand for AS numbers, the Internet Assigned Number Authority (IANA) started to allocate four-octet AS numbers in the range from 65536 to 4294967295. RFC 5396, Textual Representation of Autonomous System (AS) Numbers, documents three methods of representing AS numbers. Cisco has implemented the following two methods:
. Asplain — Decimal value notation where both 2-byte and 4-byte AS numbers are represented by their decimal value. For example, 65526 is a 2-byte AS number and 234567 is a 4-byte AS number.
. Asdot — Autonomous system dot notation where 2-byte AS numbers are represented by their decimal value and 4-byte AS numbers are represented by a dot notation. For example, 65526 is a 2-byte AS number and 1.169031 is a 4-byte AS number (this is dot notation for the 234567 decimal number).
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-xe-3s-book/irg-4byte-asn.html
Q375. Refer to the exhibit.
You have configured two routing protocols across this point-to-point link. How many BFD sessions will be established across this link?
A. three per interface
B. one per multicast address
C. one per routing protocol
D. one per interface
Answer: D
Explanation:
Cisco devices will use one Bidirectional Forwarding Detection (BFD) session for multiple client protocols in the Cisco implementation of BFD for Cisco IOS Releases 12.2(18)SXE, 12.0(31)S, and 12.4(4)T. For example, if a network is running OSPF and EIGRP across the same link to the same peer, only one BFD session will be established, and BFD will share session information with both routing protocols.
Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1053749
Q376. Which two statements about IPv4 and IPv6 networks are true? (Choose two.)
A. In IPv6, hosts perform fragmentation.
B. IPv6 uses a UDP checksum to verify packet integrity.
C. In IPv6, routers perform fragmentation.
D. In IPv4, fragmentation is performed by the source of the packet.
E. IPv4 uses an optional checksum at the transport layer.
F. IPv6 uses a required checksum at the network layer.
Answer: A,B
Q377. Refer to the exhibit.
Which statement is true?
A. This is an MPLS TE point-to-multipoint LSP in an MPLS network.
B. This is an MPLS TE multipoint-to-point LSP in an MPLS network.
C. This is a point-to-multipoint LSP in an MPLS network.
D. This is a multipoint-to-multipoint LSP in an MPLS network.
Answer: D
Explanation:
Same example of this provided on slide 24 at the reference link below:
Reference: “mVPN Deployment Models” Cisco Live Presentation
http://d2zmdbbm9feqrf.cloudfront.net/2014/eur/pdf/BRKIPM-2011.pdf, slide 24
Q378. DRAG DROP
Drag each OSPF route-type identifier on the left to its description on the right.
Answer:
Q379. Refer to the exhibit.
Which two configuration changes enable the user admin to log in to the device? (Choose two.)
A. Configure the login authentication to be case-insensitive.
B. Configure the user admin with a password and appropriate privileges.
C. Configure the login authentication to be case-sensitive.
D. Modify the configuration to use a named group.
E. Configure additional login authentication under the terminal lines.
Answer: A,B
Explanation:
Usernames and passwords are case-sensitive. Users attempting to log in with an incorrectly cased username or password will be rejected. If users are unable to log into the router with their specific passwords, reconfigure the username and password on the router.
Reference: http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-110/45843-configpasswords.html
Q380. Which IP SLA operation type uses IP to measure the round-trip time between a router and a device?
A. HTTP
B. ICMP Echo
C. ICMP Path Jitter
D. UDP Jitter for VoIP
Answer: B