It is impossible to pass Microsoft AZ-801 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Microsoft AZ-801 practice questions. You will get a surprising result by our Improve Configuring Windows Server Hybrid Advanced Services practice guides.

Free demo questions for Microsoft AZ-801 Exam Dumps Below:

NEW QUESTION 1

You have an Azure Active Directory Domain Services (Azure AD DS) domain named aadds.contoso.com. You have an Azure virtual network named Vnet1. Vnet1 contains two virtual machines named VM1 and VM2 that run Windows Server. VMI and VM2 are joined to aadds.contoso.com.
You create a new Azure virtual network named Vnet2. You add a new server named VM3 to Vnet2. When you attempt to join VM3 to aadds.contoso.com, you get an error message that the domain cannot be
found.
You need to ensure that you can join VM3 toaadds.contoso.com.
AZ-801 dumps exhibit


Solution:
AZ-801 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 2

You have two servers that have the Web Server (IIS) server role installed. The servers are configured as shown in the following table.
AZ-801 dumps exhibit
Both servers are configured to enable website deployment by using the Web Deployment Tool. Server1 hosts a website named Site1 that has Web Deploy Publishing configured.
You plan to migrate Site1 to Server2.
You need to perform a pull synchronization of Site1 by using the Web Deployment Agent Service. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
AZ-801 dumps exhibit


Solution:
Reference:
https://docs.microsoft.com/en-us/iis/publish/using-web-deploy/synchronize-iis

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 3

You need to meet the technical requirements for Cluster3. What should you include in the solution?

  • A. Enable integration services on all the virtual machines.
  • B. Add a Windows Server server role.
  • C. Configure a fault domain doe the cluster.
  • D. Add a failover cluster role.

Answer: D

Explanation:
The Hyper-V replica broker role is required on the cluster. Reference:
https://docs.microsoft.com/en-us/virtualization/community/team-blog/2012/20120327-why-is-the-hyper-v-replic

NEW QUESTION 4

You have three Azure virtual machines named VM1, VM2, and VM3 that host a multitier application. You plan to implement Azure Site Recovery.
You need to ensure that VM1, VM2, and VM3 fail over as a group. What should you configure?

  • A. an availability zone
  • B. a recovery plan
  • C. an availability set

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/site-recovery/site-recovery-overview

NEW QUESTION 5

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server.
You need to ensure that only specific applications can modify the data in protected folders on Server1. Solution: From App & browser control, you configure the Exploit protection settings.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/customize-controlled-folders?view=

NEW QUESTION 6

You have a server that runs Windows Server. The server is configured to encrypt all incoming traffic by using a connection security rule.
You need to ensure that Server1 can respond to the unencrypted tracert commands initiated from computers on the same network.
What should you do from Windows Defender Firewall with Advanced Security?

  • A. From the IPsec Settings, configure IPsec defaults.
  • B. Create a new custom outbound rule that allows ICMPv4 protocol connections for all profiles.
  • C. Change the Firewall state of the Private profile to Off.
  • D. From the IPsec Settings, configure IPsec exemptions.

Answer: D

NEW QUESTION 7

You have a Storage Spaces Direct configuration that has persistent memory and contains the data volumes shown in the following table.
AZ-801 dumps exhibit
You plan to add data volumes to Storage Spaces Direct as shown in the following table.
AZ-801 dumps exhibit
On which volumes can you use direct access (DAX)?

  • A. Volume3 only
  • B. Volume4 only
  • C. Volume1 and Volume3 only
  • D. Volume2 and Volume4 only
  • E. Volume3 and Volume4 only

Answer: A

Explanation:
DAX can only be used on one volume and the volume has to be NTFS. You could configure DAX on Volume1 (although that would require reformatting the volume) or Volume3. However, ‘Volume1 only’ isn’t an answer option so Volume3 is the correct answer.
‘Volume1 and Volume3’ is incorrect because of the single volume limitation. Reference:
https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/persistent-memory-direct-access

NEW QUESTION 8

Your company uses Storage Spaces Direct.
You need to view the available storage in a Storage Space Direct storage pool. What should you use?

  • A. File Server Resource Manager (FSRM)
  • B. the Get-StorageSubsystem cmdlet
  • C. Disk Management
  • D. Windows Admin Center

Answer: D

NEW QUESTION 9

Your network contains an Active Directory Domain Services (AD DS) domain that has the Active Directory Recycle Bin enabled. All domain controllers are backed up daily.
You accidentally remove all the users from a domain group.
You need to get a list of the users that were previously in the group.
Which four actions should you perform in sequence from a domain controller? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-801 dumps exhibit


Solution:
Graphical user interface, text, table Description automatically generated with medium confidence
Reference:
http://sysadmindoc.blogspot.com/2018/10/mount-active-directory-database-from.html

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 10

You have two file servers named Server1 and Server2 that run Windows Server. Server1 contains a shared folder named Data. Data contains 10 TB of data.
You plan to decommission Server1.
You need to migrate the files from Data to a new shared folder on Server2. The solution must meet the following requirements:
AZ-801 dumps exhibit Ensure that share, file, and folder permissions are copied.
AZ-801 dumps exhibit After the initial copy occurs, ensure that changes in \\Server1\Data can be synced to the destination without initiating a full copy.
AZ-801 dumps exhibit Minimize administrative effort.
What should you use?

  • A. xcopy
  • B. Storage Replica
  • C. Storage Migration Service
  • D. azcopy

Answer: C

Explanation:
Reference:
https://docs.microsoft.com/en-us/windows-server/storage/storage-migration-service/overview#why-use-storage

NEW QUESTION 11

You have a server named Server1 that runs Windows Server.
On Server1, you create a Data Collector Set named CollectorSet1 based on the Basic template. You need to configure CollectorSet1 to meet the following requirements:
AZ-801 dumps exhibit Older performance counter logs must be overwritten by new ones.
AZ-801 dumps exhibit Performance counter logging must stop if there is less than 500 MB of free disk space.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
AZ-801 dumps exhibit


Solution:
Table Description automatically generated with medium confidence

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 12

You have 50 on-premises servers that run Windows Server. You have an Azure subscription that contains 50 virtual machines that run Windows Server.
You need to create an Azure Monitor alert that will be triggered if one of the servers or virtual machines has less than 10 percent available disk space.
What should you do first?

  • A. Create an Alert Rule
  • B. Install the Azure Monitor agent on each server.
  • C. Enable System Insights on each server.
  • D. Create a Log Analytics workspace and configure the Agent management settings.

Answer: A

Explanation:
https://learn.microsoft.com/en-us/answers/questions/165893/help-to-set-up-azure-alert-for-disk-space-alert-wh.h

NEW QUESTION 13

You deploy Azure Migrate to an on-premises network.
You have an on-premises physical server named Server1 that runs Windows Server and has the following configuration.
* Operating system disk 600 GB
* Data disic 3 TB
* NIC Teaming: Enabled
* Mobility service: installed
* Windows Firewall: Enabled
* Microsoft Defender Antivirus: Enabled
You need to ensure that you can use Azure Migrate to migrate Server1. Solution: You shrink the data disk on Server1.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 14

Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The functional level of the forest and the domain is Windows Server 2012 R2. The domain contains the domain controllers shown in the following table.
AZ-801 dumps exhibit
You need to raise the forest functional level to Windows Server 2016. The solution must meet the following requirements:
AZ-801 dumps exhibit Ensure that there are three domain controllers after you raises the level.
AZ-801 dumps exhibit Minimize how long the FSMO roles are unavailable.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-801 dumps exhibit


Solution:
Graphical user interface, text, application, email Description automatically generated

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 15

You have two Azure virtual machines named VM1 and VM2. VM1 is backed up to an Azure Recovery Services vault daily and retains backups for 30 days.
You need to restore an individual file named C:\Data\Important.docx from VM1 to VM2. The solution must minimize administrative effort.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
AZ-801 dumps exhibit


Solution:
Text Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-restore-files-from-vm

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 16

You need to use a comma-separated value (CSV) file to import server inventory to Azure Migrate. Which fields are mandatory for each entry in the CSV file?

  • A. Server nam
  • B. Cores, OS Name, and Memory (in MB)
  • C. Server name, IP addresse
  • D. Disk 1 size (in GB), and CPU utilization percentage
  • E. Server name, IP addresses, OS version, and Number of disks

Answer: B

NEW QUESTION 17

Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server. All the servers are on the same network and have network connectivity.
On Server1, Windows Defender Firewall has a connection security rule that has the following settings:
• Rule Type: Server-to-server
• Endpoint 1: Any IP address
• Endpoint 2: Any IP address
• Requirements: Require authentication for inbound connections and request authentication for outbound connections
• Authentication Method: Computer (Kerberos V5)
• Profile: Domain, Private, Public
• Name: Rule1
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
AZ-801 dumps exhibit


Solution:
AZ-801 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 18

Your on-premises network has a 200-Mbps connection to Azure and contains a server named Server1 that stores 70 TB of data files.
You have an Azure Storage account named storage 1.
You plan to migrate the data files from Server1 to a blob storage container in storage!. Testing shows that copying the data files by using azcopy will take approximately 35 days.
You need to minimize how long it will take to migrate the data to Azure. What should you use?

  • A. Storage Migration Service
  • B. Azure Storage Explorer
  • C. Azure Data Box
  • D. Azure File Sync

Answer: C

NEW QUESTION 19
......

P.S. Allfreedumps.com now are offering 100% pass ensure AZ-801 dumps! All AZ-801 exam questions have been updated with correct answers: https://www.allfreedumps.com/AZ-801-dumps.html (128 New Questions)