The Most Recent Guide To FCP_FMG_AD-7.4 Study Guide

NEW QUESTION 1
What will be the result of reverting to a previous revision version in the revision history?

• A. It win install configuration changes to managed device automatically.
• B. It will tag the device settings status as Auto-Update.
• C. It will modify the device-level database.
• D. It will generate a new version ID and remove all other revision history versions.

Answer: C

Explanation:
✑ Option C: It will modify the device-level database.This is correct. Reverting to a previous revision version in the revision history affects the device-level database by restoring it to the state saved in the selected revision. This ensures that any changes made after the selected revision are discarded, and the device configuration is returned to the earlier state.
Explanation of Incorrect Options:
✑ Option A: It will install configuration changes to managed devices automaticallyis incorrect because reverting a revision does not automatically push changes to the devices; it merely reverts the configuration on the FortiManager.
✑ Option B: It will tag the device settings status as Auto-Updateis incorrect because "Auto-Update" is not a status related to the revision history mechanism.
✑ Option D: It will generate a new version ID and remove all other revision history versionsis incorrect as reverting to a previous revision does not delete all other versions; it creates a new revision point for tracking.
FortiManager References:
✑ Refer to the "Revision Management" section in the FortiManager Administration Guide, which provides an overview of how revisions are managed and utilized for restoring configurations.

NEW QUESTION 2
Refer to the exhibit.

Given the configuration shown in the exhibit, which two conclusions can you draw from the installation targets in the Install On column? (Choose two.)

• A. Policy seq.S will be installed on all managed devices and VDOMs that are listed under Installation Targets
• B. Policy seq.# 3 will be skipped because no installation targets are specified.
• C. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target
• D. Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.

Answer: AD

Explanation:
✑ Option A: Policy seq.S will be installed on all managed devices and VDOMs that are listed under Installation Targets.This is correct. The "Install On" column indicates that the policy is targeted for installation on all listed managed devices and VDOMs under Installation Targets.
✑ Option D: Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.This is correct. Policy sequence #1 specifies that it will be installed only on the ISFW device and the VDOMs 'root[NAT]' and 'Student[NAT]' as indicated by the "Install On" column.
Explanation of Incorrect Options:
✑ Option B: Policy seq.# 3 will be skipped because no installation targets are specifiedis incorrect because it is clearly listed under "Installation Targets," which means it will be installed according to the specified configuration.
✑ Option C: Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Targetis incorrect as the exhibit does not show any specific exclusion for seq.# 2 on the Local-FortiGate root VDOM.
FortiManager References:
✑ Refer to the FortiManager Administration Guide sections on "Policy Packages" and "Policy Installation Targets" for more details.

NEW QUESTION 3
An administrator created a new global policy package that includes header and footer policies and then assigned it to an ADOM. What are two outcomes of this action? (Choose two.)

• A. To assign another global policy package later to the same ADO
• B. you must unassign this policy first.
• C. After you assign the global policy package to an ADO
• D. the impacted policy packages become hidden in that ADOM.
• E. You can edit or delete all the global objects in the global ADOM.
• F. You must manually move the header and footer policies after the policy assignment.

Answer: AC

Explanation:
✑ Option A: To assign another global policy package later to the same ADOM, you must unassign this policy first.This is correct. FortiManager does not allow multiple global policy packages to be assigned to a single ADOM simultaneously. If you want to assign a different global policy package, the existing one must be unassigned first.
✑ Option C: You can edit or delete all the global objects in the global ADOM.This is correct. Once a global policy package is assigned, you have the flexibility to edit or delete global objects in the global ADOM, affecting all ADOMs to which this package is assigned.
Explanation of Incorrect Options:
✑ Option B: After you assign the global policy package to an ADOM, the impacted policy packages become hidden in that ADOMis incorrect because the policy packages do not become hidden; they are modified according to the global
policies.
✑ Option D: You must manually move the header and footer policies after the policy assignmentis incorrect because header and footer policies are automatically applied when assigned.
FortiManager References:
✑ See the "Global Policy and ADOM Management" section in the FortiManager Administration Guide.

NEW QUESTION 4
Refer to the exhibit.

An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?

• A. During discover
• B. FortiManager uses only the FortiGate serial number to establish the
• C. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
• D. During discover
• E. FortiManager sets the NATed device IP address on FortiGate.
• F. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.

Answer: D

Explanation:
When adding a FortiGate device to FortiManager that is operating behind a NAT device, and the FortiManager NATed IP address is configured under the system administration settings, FortiManager will set the FortiManager NATed IP address on the FortiGate device during the discovery process. This ensures that the FortiGate knows how to reach the FortiManager through the NAT device.
Options A, B, and C are incorrect because:
✑ Ais incorrect because the discovery process also requires knowing the NATed IP to establish a connection, not just the serial number.
✑ Bis incorrect because FortiManager does not set the NAT device's IP address on the FortiGate.
✑ Cis incorrect because it implies that the NAT device IP is set on FortiGate, which is not the expected outcome.
FortiManager References:
✑ Refer to FortiManager 7.4 Administrator Guide: Device Discovery and Management with NAT.

NEW QUESTION 5
An administrator wants to create a policy on an ADOM that is in backup mode and install it on a FortiGate device in the same ADOM. How can the administrator perform this task?

• A. The administrator must use the Policy & Objects section to create a policy first.
• B. The administrator must use a FortiManager script.
• C. The administrator must disable the FortiManager offline mode first.
• D. The administrator must change the ADOM mode to Advanced to bring the FortiManager online.

Answer: B

Explanation:
To create and install a policy on a FortiGate device in an ADOM (Administrative Domain) that is in backup mode, the administrator must use a FortiManager script. This is because backup mode restricts direct configuration changes, and scripts can be used to push specific configuration changes without altering the ADOM mode.
Options A, C, and D are incorrect because:
✑ A requires the ADOM to be in normal or advanced mode to create policies directly in the Policy & Objects section.
✑ C suggests disabling offline mode, which is irrelevant to the backup mode configuration.
✑ D implies changing the ADOM mode, which is unnecessary if using a script to perform the task.
FortiManager References:
✑ Refer to FortiManager 7.4 Administrator Guide: Working with ADOMs and Using Scripts for managing policies in backup mode.

NEW QUESTION 6
What must you consider before deciding to use FortiManager to manage a FortiAnalyzer device?

• A. Confirm that FortiManager has enough storage capacity for the expected logs.
• B. Ensure that FortiAnalyzer features are installed in advance.
• C. Check whether FortiManager is part of a high availability (HA) cluster.
• D. Determine whether the VDOMs of the same FortiGate will be assigned to different ADOMs.

Answer: B

Explanation:
When deciding to use FortiManager to manage a FortiAnalyzer device, you must ensure certain conditions are met so that the integration works seamlessly. One key aspect to consider is whether the necessary FortiAnalyzer features are enabled on FortiManager.
Explanation of Options:
✑ A. Confirm that FortiManager has enough storage capacity for the expected logs.
✑ B. Ensure that FortiAnalyzer features are installed in advance.
✑ C. Check whether FortiManager is part of a high availability (HA) cluster.
✑ D. Determine whether the VDOMs of the same FortiGate will be assigned to different ADOMs.

NEW QUESTION 7
An administrator configures a new OSPF area on FortiManager and has not yet pushed the changes to the managed FortiGate device. In which database will the configuration be saved?

• A. Device-level database
• B. ADOM-level database
• C. Configuration-level database
• D. Revision history database

Answer: A

Explanation:
When an administrator configures a new OSPF area on FortiManager but has not yet pushed the changes to the managed FortiGate device, the configuration is saved in the Device-level database.
Explanation of Options:
✑ A. Device-level database:
✑ B. ADOM-level database:
✑ C. Configuration-level database:
✑ D. Revision history database:

NEW QUESTION 8
An administrator is in the process of copying a system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfile Where does this command import the system template profile from?

• A. FortiManager file system
• B. ADOM2 object database
• C. ADOM2 device database
• D. Source ADOM policy database

Answer: A

Explanation:
The commandexecute fmprofile import-profile ADOM2 3547 /tmp/myfileis used to import a system template profile from the FortiManager file system. The path/tmp/myfileindicates a location in the FortiManager's local file system, from which the profile will be imported into the specified ADOM.
Options B, C, and D are incorrect because:
✑ B, C, and Dsuggest importing from different databases, which is not accurate since the command explicitly refers to the file system location.
FortiManager References:
✑ Refer to FortiManager 7.4 CLI Reference Guide: Commands for Profile Management.

NEW QUESTION 9
Exhibit.

Given the configuration shown in the exhibit, what are two results from this configuration?
{Choose two.)

• A. You can validate administrator login attempts through external servers.
• B. The same administrator can lock more than one ADOM at the same time.
• C. Two or more administrators can make configuration changes at the same time, in the same ADOM.
• D. Concurrent read-write access to an ADOM is disabled.

Answer: BD

Explanation:
The configuration shown in the exhibit sets theworkspace-mode to normal. The workspace mode in FortiManager defines how configuration changes and administrative tasks are handled, specifically regarding locking and collaboration in ADOMs (Administrative Domains).
Understanding the workspace modes:
✑ Normal Mode:In this mode, only one administrator at a time can lock and edit an ADOM. The changes made by one administrator must be completed and saved before another administrator can make changes. It prevents concurrent read-write access within the same ADOM.
✑ Workflow Mode:This mode allows multiple administrators to work on different tasks within the same ADOM, but changes still need to be approved before being committed.
Explanation of Options:
✑ A. You can validate administrator login attempts through external servers.
✑ B. The same administrator can lock more than one ADOM at the same time.
✑ C. Two or more administrators can make configuration changes at the same time, in the same ADOM.
✑ D. Concurrent read-write access to an ADOM is disabled.

NEW QUESTION 10
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package. Fortinet. in the custom ADOM1. What happens to the Fortinet policy package when it is created?

• A. You must assign the global policy package from the global ADOM.
• B. The global policy package is automatically assigned.
• C. You must reapply the global policy package to ADOM1.
• D. You can select the option to assign the global policies.

Answer: B

Explanation:
When a new policy package is created in a custom ADOM that already has a global policy package assigned, the global policy package is automatically assigned to the
new policy package. This behavior ensures consistent policy enforcement across different ADOMs.
Options A, C, and D are incorrect because:
✑ A and C incorrectly suggest that manual reassignment or reapplication is needed.
✑ D implies optional assignment, whereas it is automatically done.
FortiManager References:
✑ Refer to FortiManager 7.4 Administrator Guide: Working with Global and Custom ADOM Policy Packages

NEW QUESTION 11
Refer to the exhibit.

• A. Policy ID 2 is installed in the disabled state.
• B. Policy ID 2 is installed without the remote user student.
• C. Policy ID 2 will not be installed.
• D. Policy ID 2 is installed without a source address.

Answer: B

Explanation:
From the log provided in the exhibit, several conclusions can be drawn regarding the installation of Policy ID 2:
✑ The installation process fails when attempting to set theLDAP user "student". The log shows:
Because of these errors, while other configuration elements (such as source and destination interfaces, actions, and services) are properly set, the user configuration for "student"isnot applied.
Evaluation of the answer options:
✑ A. Policy ID 2 is installed in the disabled state.
✑ B. Policy ID 2 is installed without the remote user student.
✑ C. Policy ID 2 will not be installed.
✑ D. Policy ID 2 is installed without a source address.
From the log exhibit, we see errors related to the "ldap-server" attribute not being set and an error with the entry "student" not being found in the datasource. This indicates that Policy ID 2 will not be installed due to missing or incorrect data required for successful installation. The "Command fail. Return code -3" confirms the installation failure, so the correct answer is C.
Options A, B, and D are incorrect because:
✑ A suggests the policy is installed in a disabled state, which isn't supported by the log.
✑ B and D suggest partial installation, but the error messages indicate a complete failure to install Policy ID 2.
FortiManager References:
✑ Refer to FortiManager 7.4 Troubleshooting Guide: Common Errors and Log Interpretation.

NEW QUESTION 12
......