Actualtests presents the Microsoft 70-680 within two forms-PDF files and also Test engine software. Youd better require a test ahead of buying. Then youll find what can be completed in reduced and higher proficiency. Choose the suitable Microsoft 70-680 practice materials based on personal requirements. All the Microsoft exam contents regarding Pdf files can download for free following purchasing. Your test engine will create a real testing environment in your case, which will allow you to feel no cost and confident from the Microsoft 70-680 actual exam. Consider full good thing about our Microsoft Microsoft studying supplies, you will pass the Microsoft exam with a higher mark. We all provide almost 100% guarantee to acquire certified with the assistance regarding Actualtestss products. in reality, you will obtain full refund in case you fail. Or it is possible to order yet another Microsoft Microsoft 70-680 exam dumps for no cost.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
2021 Mar 70-680 answers
Q231. - (Topic 5)
You have a computer that has the following hardware configuration:
1.6-gigahertz (GHz) processor (64-bit)
8-GB RAM
500-GB hard disk
Graphics card that has 128-MB RAM
You need to select an edition of Windows 7 to meet the following requirements:
Support DirectAccess
Support Windows XP Mode
Use all of the installed memory
Support joining an Active Directory domain
Which edition should you choose?
A. Windows 7 Enterprise (x86)
B. Windows 7 Professional (64-bit)
C. Windows 7 Enterprise (64-bit)
D. Windows 7 Ultimate (x86)
Answer: C
Q232. - (Topic 1)
You have a standalone computer that runs Windows 7. You need to prevent non-administrative users from using Device Manager. Users must be able to access Event Viewer.
What should you do?
A. From Control Panel, modify the default settings for media and devices.
B. From Control Panel, modify the default settings for device installation.
C. From the local computer policy, modify the application control policies.
D. From the local computer policy, modify the Microsoft Management Console (MMC) settings.
Answer: D
Explanation:
Controlling MMC usage by using local Group Policy To control MMC usage by using local Group Policy
11. Open MMC 3.0.
12. On the File menu, click Add/Remove Snap-in.
13. In the Available snap-ins list, click the Group Policy editor, and then click Add.
14. In the Select Group Policy Object wizard, use the default setting, Local Computer, in the Group Policy Object field.
15. Click Finish to close the Select Group Policy Object wizard.
16. By default, all available snap-in extensions are enabled. If you want to enable only certain extensions, highlight the snap-in in the Selected snap-ins list, and then click Edit Extensions.
17. By default, snap-ins load as child objects of the Console Root node. Click Advanced to modify this behavior and allow you to choose a different parent snap-in.
18. In the Add or Remove Snap-ins dialog box, click OK.
19. Before closing the new console, perform any of these procedures:
-To restrict access to author mode in MMC
-To restrict access to a permitted list of snap-ins
-To permit or restrict access to a snap-in
Q233. - (Topic 3)
You have a computer that runs Windows 7 Professional.
You need to upgrade the computer to Windows 7 Ultimate. You must achieve this goal in the minimum amount of time.
What should you do?
A. Run Windows Update.
B. Run Windows Anytime Upgrade.
C. From the Windows 7 installation media, run Setup.exe.
D. From the Windows 7 installation media, run Migwiz.exe.
Answer: B
Explanation:
Windows Anytime Upgrade With Windows Anytime Upgrade, shown in Figure,you can purchase an upgrade to an application over the Internet and have the features unlocked automatically. This upgrade method is more suitable for home users and users in small
businesses where a small number of intra-edition upgrades is required.
Windows Anytime Upgrade
Q234. HOTSPOT - (Topic 6)
A law firm's wireless network does not use IPv6 and provides IP addresses automatically to connected clients.
A visiting attorney arrives to perform a deposition. The attorney's computer has never connected to the firm's wireless network. The attorney needs general access to several websites but is unable to connect to the Internet.
You collect information from the computer's Device Manager, Network Connections, and Wireless Network Connections.
Device information is shown in the Device Manager exhibit. (Click the Exhibit button.)
Network information is shown in the Network Connections exhibit. (Click the Exhibit button.)
Wireless network information is shown in the Wireless Network Connections exhibit. (Click the Exhibit button.)
You need to configure this attorney's laptop so it can access the Internet through the firm's wireless network.
Consider each of the following statements. Does the information in the three screenshots support the inference as stated? (This question is worth three points.)
Answer:
Q235. - (Topic 2)
You have a computer that runs Windows 7. You connect to your company's network by using a VPN connection.
You discover that when you establish the VPN connection, you are unable to access Internet Web sites.
When you disconnect the VPN connection, you can access Internet Web sites.
You need to access Internet Web sites while you are connected to the VPN.
What should you do?
A. Configure the VPN connection to use only PPTP.
B. Configure the VPN connection to use only L2TP/IPSec.
C. From the Internet Protocol Version 4 (TCP/IPv4) properties of the local area connection, disable the Automatic metric setting.
D. From the Internet Protocol Version 4 (TCP/IPv4) properties of the VPN connection, disable the Use default gateway on remote network setting.
Answer: D
Explanation:
To prevent the default route from being created In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box.
Regenerate 70-680 exam cost:
Q236. - (Topic 1)
You have a computer that runs Windows 7.
You need to configure the computer to meet the following requirements:
. Generate a new security ID (SID) when the computer starts.
. Ensure that the Welcome screen appears when the computer starts.
What should you do?
A. Run Sysprep.exe /oobe /generalize.
B. Run Sysprep.exe /audit /generalize.
C. Run Msconfig.exe and select Selective startup.
D. Run Msconfig.exe and select Diagnostic startup.
Answer: A
Explanation:
To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. Open an elevated command prompt on the reference computer and run the following command: c:windowssystem32sysprepsysprep.exe /oobe /generalize /shutdown Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged./generalize Prepares the Windows installation to be imaged. If you specify this option, all unique system information is removed from the Windows installation. The SID is reset, system restore points are cleared, and event logs are deleted. The next time the computer starts, the specialize configuration pass runs. A new SID is created, and the clock for Windows activation resets (unless the clock has already been reset three times)./oobeRestarts the computer in Windows Welcome mode. Windows Welcome enables users to customize their Windows 7 operating system, create user accounts, and name the computer. Any settings in the oobeSystem configuration pass in an answer file are processed immediately before Windows Welcome starts.
Q237. DRAG DROP - (Topic 6)
You manage the Windows 7 Professional computers for a small architecture firm. All computers operate in workgroup mode.
The lead engineer asks you to enable employees to share CAD files located on their desktop computers with all of the other members of the firm.
You create a HomeGroup on the lead engineer's computer.
You need to configure the rest of the computers in the firm to join this HomeGroup.
Which four actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order. 1)
Answer:
Q238. - (Topic 3)
You have a computer named Computer1 that runs Windows 7. Computer1 has Remote Desktop enabled. Computer1 has a shared printer named Printer1.
A group named HRUsers is a member of the Remote Desktop Users group. Only HRUsers has access to Printer1. A user named User1 is a member of HRUsers.
You need to configure the computer to meet the following requirements:
Allow User1 to print to Printer1 Prevent User1 from establishing Remote Desktop sessions to Computer1 Allow other members of HRUsers to connect to Computer1 by using Remote Desktop
What should you do?
A. Remove User1 from the HRUsers group.
B. Remove HRUsers from the Remote Desktop Users group.
C. Assign User1 the Deny log on through Remote Desktop Services user right.
D. Assign User1 the Deny access to this computer from the network user right. Assign HRUsers the Allow log on locally user right.
Answer: C
Q239. - (Topic 6)
You are deploying a number of Windows 7 laptops.
You create a custom power plan on one of the laptops that you want to replicate to the other laptops by using an unattended setup.
You need to capture the power plan from the configured laptop for use in the deployment of the other laptops, save it to the removable drive F:, and name it MobileScheme.
What should you do?
A. Run the command powercfg duplicatescheme <GUID> F:MobileScheme.pow from an elevated command prompt.
B. Run the command powercfg -EXPORT F:MobileScheme.pow {GUID} from an elevated command prompt.
C. Run the command powercfg -S F:MobileScheme.pow from an elevated command prompt.
D. Create a power plan from the Power Options control panel and save it to the F: drive as MobileScheme.
Answer: B
Q240. DRAG DROP - (Topic 5)
You use a computer that has Windows 7 Enterprise installed.
You install two new hard disk drives and verify that the disks have been detected by Disk Management.
You need to configure the two new disks for maximum read and write performance.
What should you do? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer: