Practical Microsoft MS-721 Free Dumps Online

NEW QUESTION 1

Your company uses Microsoft Skype for Business Server 2015 and Enterprise Voice as the PSTN solution. You plan to migrate all users to Microsoft Teams Calling Plans.
You will decommission Skype for Business Server after the migration is complete.
You need to ensure that all the users retain their current phone number once the migration is complete. The solution must minimize the downtime of PSTN features for each user.
What should you do first?

• A. From the Microsoft 365 admin center, purchase Communications Credits for all the users.
• B. Schedule a port order for the phone numbers of all the users.
• C. From the Microsoft Teams admin center, order phone numbers for all the users.
• D. Migrate all the users to Teams.

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/phone-number-calling-plans/transfer-phone-numbers-to-teams

NEW QUESTION 2

You have a Microsoft Teams Phone deployment. Direct Routing is enabled for all users. The users can place and receive PSTN calls.
You need to create a new user policy to provide four-digit extension dialing for users to call analog endpoints that connect to the Session Border Controller (SBC).
Which three actions should you perform? Each correct answer presents part of the solution.

• A. Create a trunk translation rule.
• B. Create an IP phone policy.
• C. Assign a dial plan to the users.
• D. Assign an IP phone policy to the users.
• E. Create a voice normalization rule.
• F. Create a tenant dial plan.

Answer: CEF

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/what-are-dial-plans https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans

NEW QUESTION 3

You are deploying Microsoft Teams Calling Plans to three users as shown in the following table.

You need to resolve the issues.
What should you assign to each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4

You are deploying Teams Rooms to a Windows device.
You need to prevent meeting attendees from using room remote in the Teams mobile app. What should you configure in the Microsoft Teams admin center?

• A. Supported meeting mode
• B. Coordinated Meetings
• C. Front row experience
• D. Bluetooth beaconing

Answer: D

Explanation:
Manage a Microsoft Teams Rooms console settings remotely with an XML configuration file
This article discusses remote management of the default settings used by a Microsoft Teams Rooms device. It discusses how to create a master settings file and links to discussions of how to place them as needed on Teams Rooms.
It is possible for you to change default settings of Teams Rooms by updating a master XML file and sending copies to the remote Teams Rooms devices.
Create an XML configuration file
Any text editor can be used to create a settings file. The XML Elements table explains the elements shown in this sample SkypeSettings.xml (required file name) configuration file.
<SkypeSettings>
<AutoScreenShare>1</AutoScreenShare>
<HideMeetingName>1</HideMeetingName>
<AutoExitMeetingEnabled>true</AutoExitMeetingEnabled>
<AudioRenderDefaultDeviceVolume>70</AudioRenderDefaultDeviceVolume>
* Details omitted*
<AllowRoomRemoteEnabled>true</AllowRoomRemoteEnabled> Incorrect:
Not B: If you have one or more Microsoft Teams Rooms on Windows devices or Surface Hubs in a meeting room, you can set up Coordinated Meetings. Coordinated Meetings lets you set up your Teams Rooms on Windows devices and Surface Hubs so that when you join a meeting on one device, the other devices in the room are also joined to the same meeting. You can configure your cameras, speakers, and microphones so that the ones that give participants the best experience are enabled while others are disabled. This avoids the dreaded echo and feedback noise participants can experience when adding multiple devices to a meeting.
Not C: Front Row layout in Teams Rooms– Additional functionality with the Front Row experience, a layout for hybrid meetings that enables users to see remote attendees at eye level and on dual screens. Users can see Chat in the right panel and participants with raised hands on the left panel. And, Meeting Chat is added in the Gallery, Large Gallery, and Together Mode layouts.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/rooms/xml-config-file https://learn.microsoft.com/en-us/microsoftteams/rooms/coordinated-meetings

NEW QUESTION 5

You have a Microsoft Teams Phone deployment that contains common area phones located in a public lobby. You need to enable Advanced calling features on all the common area phones.
What should you configure from the Microsoft Teams admin center?

• A. a customization policy
• B. a configuration profile
• C. a calling policy
• D. a policy package

Answer: B

Explanation:
Set up common area phones for Microsoft Teams Set policies for common area phones
Use policies to control which features are available to users on common area phones. Set up Advanced calling on common area phones (optional)
By default, the basic calling experience will be on the common area phone's home screen, but you can turn on an advanced calling experience.
To use these advanced calling features on supported Teams phone device models, you can turn on the Advanced calling toggle in the Teams admin center or on your Teams phone device that is signed into your Teams Shared Devices account.
Turning on advanced calling capabilities requires you to purchase hardware models that can support all required capabilities.
* 1. Turn on Advanced calling in Teams admin center
* 2. Sign into the Teams admin center with a Microsoft 365 admin account.
* 3. From the left-side menu, navigate to Teams devices > Phones > and select the Configuration profiles tab.
* 4. From the list, select the configuration profile assigned to your common area phone.
* 5. Under the Calling settings section, find the Advanced calling toggle.
* 6. Turn on the toggle.
* 7. At the bottom of the page, select the Save button. Incorrect:
Not C: Calling policies
Use calling policies to enable private calls, using call forwarding, or simultaneous ring on common area phones.
Note: A common area phone is typically placed in an area like a lobby or another area that is available to many people to make a call: a reception area, lobby, or conference phone. Common area phones are signed in with accounts tied to a Microsoft Teams Shared Devices license.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/set-up-common-area-phones

NEW QUESTION 6

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.
Solution: You redirect calls for the call queue to a shared voicemail box. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Reference:
https://www.orbid365.be/shared-voicemail-arrives-in-teams/

NEW QUESTION 7

You have a Microsoft Teams Phone deployment that uses Direct Routing. You create a new Teams user named User1.
You need to enable User1 as an agent in a call queue. What should you do first?

• A. Assign a dial plan to User1.
• B. Assign a phone number to User1.
• C. Enable hosted voicemail for User1.
• D. Enable Enterprise Voice for User1.

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/plan-auto-attendant-call-queue

NEW QUESTION 8

You are planning a Microsoft Teams Phone deployment. That will use Direct Routing. You need to allow traffic from Microsoft 365 to a Session Border Controller (SBC). Which IP address ranges should you allow through the firewall?

• A. 52.112.0.0/14 and 52.120.0.0/14
• B. 10.10.0.0/24 and 10.11.0.0/24
• C. 8.8.8.8/32 and 4422/32
• D. 132.245.0.0/16and40.104.0.0/15

Answer: A

NEW QUESTION 9

You have a Microsoft Teams Phone deployment You are implementing dynamic emergency calling.
You need to define a network topology for the implementation.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area. NOTE: Each correct selection a worth one point

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 10

You have a Microsoft Teams Phone deployment
You assign a Microsoft 365 E5 license lo a user named User1. You need to enable User1 for Direct Routing.
Which PowerShell cmdlet should you run?

• A. Set-CsCallingLineIdentity
• B. Set-CsUser
• C. Set-CsOnlineVoiceUser
• D. Set-CsUserServicesPolicy

Answer: A

NEW QUESTION 11

Your company currently allows call park lot all PSIN users. The call pack policies are configured as shown in the exhibit. (Click the Exhibit tab.)

You have a Microsoft 365 group named Help Desk.
You need to ensure that only the Help Desk group can use call park. The solution must minimize the number of policies and administrative effort.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. Assign Policy2 to all users.
• B. In the Global (Org-wide default) policy, set Allow call park to Off.
• C. Create a new call park policy named Policy2 and set Allow call park to Off.
• D. Assign Policy1 to the Help Desk group.
• E. Assign the Global (Org-wide default) policy to the users in the Help Desk group.
• F. Create a new call park policy named Policy1 and set Allow call park to On

Answer: BDF

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/call-park-and-retrieve

NEW QUESTION 12

You need to validate the limited pilot based on the technical requirements. What should you use?

• A. Microsoft 365 network connectivity test tool
• B. self-help diagnostics for Teams
• C. the test -CsTeamsShiftsConnectionValidflte cmdlet
• D. the Teams device usage report in the Microsoft Teams admin center

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/enterprise/assessing-network-connectivity?view=o365-worldwi

NEW QUESTION 13

You need to meet the technical requirements for the returns department.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14

You have a Microsoft Teams Phone deployment.
When you attempt to deploy a Session Border Controller (SBC) named sfac1xontoso.com. you receive the following error message: "We cant use the "SBCl-Contoso.com" domain as it hasn't been set up in the organization. Try agaax. If you continue to have problems, contact Microsoft customer support."
You need to add the SBC to the tenant.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.
Solution: You configure group call pickup for the call queue. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Reference:
https://regroove.ca/stellark/2021/09/15/redirect-teams-auto-attendant-voicemail-to-a-channel-updated-method/

NEW QUESTION 16
......