Renew Building HPE Hybrid IT Solutions HPE0-V14 Sample Question

NEW QUESTION 1

A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode. The control plane must not be a single point of failure.
Rapid Fail-over. Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer’s requirements?

• A. HPE Intelligent Resilient Framework (IRF)
• B. HPE Distributed Trunking
• C. Aruba Virtual Switching Extension (VSX)
• D. Aruba Virtual Switching Framework (VSF)

Answer: C

NEW QUESTION 2

You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer’s requirements?

• A. block device
• B. replication target
• C. NDMP target
• D. VTL device

Answer: D

NEW QUESTION 3

You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?

• A. iQuote Universal
• B. Smart Selling tool
• C. Product Bulletin
• D. SPOCK

Answer: C

NEW QUESTION 4

A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 5

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.
How should you connect the switch to the network?

• A. Configure multiple user IDs or roles for the console connection
• B. Configure the management IP address on the switch and enable Telnet or SSH access
• C. Use a dedicated console cable to create a dedicated management network for every user
• D. Connect the switch to the network by using the serial cable that ships with the switch

Answer: B

NEW QUESTION 6

Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

• A. Lights-Out Online Configuration Utility
• B. OneView
• C. UEFI Control Suite
• D. Intelligent Management Center
• E. Smart Storage Administrator

Answer: AE

NEW QUESTION 7

You are creating a configuration for a new Nimble HF40 array.
Which tool should you use to ensure that you include adequate cache in the configuration?

• A. HPE NinjaSTARS
• B. HPE Storage Sizer
• C. HPE OneView
• D. HPE SPOCK

Answer: A

NEW QUESTION 8

A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?

• A. embedded application
• B. workload performance advisor
• C. workload profile
• D. Active Health System

Answer: B

NEW QUESTION 9

A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

• A. HPE StoreEver 30750
• B. HPE Storage Performance File Controller
• C. HPE StoreEasy 1460 Storage
• D. HPE StoreEasy 1650 Expanded Storage

Answer: C

NEW QUESTION 10

A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer’s needs?

• A. Nimble
• B. StoreVirtual
• C. StoreEasy
• D. MSA

Answer: D

NEW QUESTION 11

A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

• A. HPE MSA 1040
• B. HPE MSA 2052
• C. HPE Nimble AF20
• D. HPE Nimble HF20C

Answer: D

NEW QUESTION 12

A customer needs a solution that supports rapid provisioning changes on physical bare-metal servers and on a virtualization hypervisor. They are considering migrating to a new solution that supports software-defined storage.
Which HPE compute platform should the customer implement?

• A. ProLiant DL
• B. BladeSystem
• C. Synergy
• D. SimpliVity

Answer: C

NEW QUESTION 13

What should you configure to limit the scope of broadcast domains in an Ethernet network?

• A. Trunks
• B. VSAN
• C. Static ARP
• D. VLAN

Answer: D

NEW QUESTION 14

HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.
Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

• A. Changing the one-time boot option to Smart Storage Administrator in iLO web-based user interface
• B. Use Always On functionality of Intelligent Provisioning
• C. Changing the one-time boot option to Intelligent Provisioning in iLO web-based user interface
• D. Click Boot to System Setup Utilities in iLO web-based user interface
• E. Changing the one-time boot option to Intelligent Provisioning in HPE OneView

Answer: A

NEW QUESTION 15

Match each HPE solution to its corresponding technology usage.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 16

Match each adapter to its characteristic.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 17

A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst
What should they implement within their backups software to minimize the network load on the remote site?

• A. source-side deduplication
• B. target-side deduplication
• C. thin provisioning
• D. native compression

Answer: A

NEW QUESTION 18

What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

• A. Disk Drives
• B. Power Supplies
• C. Network Cards
• D. Processors

Answer: A

NEW QUESTION 19

Match the feature to the lowest iLO5 license in which it is available

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Last - last 3-2
1-1
3-3

NEW QUESTION 20

Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

• A. Proactive Care 24x7
• B. Proactive Care 24x7 with CTR
• C. Foundation Care 24x7 with DMR
• D. Foundation Care 24x7

Answer: D

NEW QUESTION 21

You need to install 10 HPE ProLiant servers in an environment without DHCP. Which tool can you use to set up remote management?

• A. Intelligent Provisioning
• B. UEFI System Utilities
• C. Intelligent Management Center
• D. iLO 5 Configuration Utility

Answer: C

NEW QUESTION 22

When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)

• A. It should be filled with blanking panels.
• B. It does not provide correct rack airflow.
• C. It provides easy access for servicing components.
• D. It allows for easier cable management.
• E. It allows for side-to-side component cooling.

Answer: AB

NEW QUESTION 23

A customer has the following requirements: two or more 10Gb SFP+ uplinks
downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables
24 downlink ports Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

• A. HPE Switch Selector
• B. HPE NinjaSTARS
• C. HPE SAF
• D. HPE SPOCK

Answer: D

NEW QUESTION 24

What is a primary benefit of DAS?

• A. It takes advantage of Common Internet File System (CIFS).
• B. It is presented as an iSCSI LUN to the attached server.
• C. It can be accessed by both server and non-server devices simultaneously.
• D. It is connected directly to a server.

Answer: C

NEW QUESTION 25
......