300-365 ( Deploying Cisco Wireless Enterprise Networks ) quiz is definitely the any pattern among It all experts. The volume of job hopefuls going after this accreditation is definitely great together with business employers are likely to employ the service of licensed experts. Start out getting your 300-365 quiz today may indicate enormous added benefits in the near future. Just after doing well from the 300-365 quiz youre going to be named as the Cisco.

2021 Nov 300-365 braindumps

Q31. A wireless engineer at a convention center has been asked to provision an SSID that can accommodate 4,000 users during a conference. Which interface group configuration should be used? 

A. One interface with /20 mask 

B. Two interfaces with /21 mask 

C. Four interfaces with /22 mask 

D. Eight interfaces with /23 mask 

Answer: D 


Q32. A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery? 

A. Use a console cable. 

B. Contact Cisco TAC and arrange an RMA of the MSE. 

C. Boot the MSE using the software installation DVD. 

D. The Password can be reset using Prime Infrastructure. 

Answer: A 


Q33. A network engineer is debugging issues with the mDNS gateway. Which type of reply should be seen in the Wireshark capture when querying for a mDNS service in the Bonjour Cache? 

A. unicast from Prime Infrastructure 

B. unicast from controller 

C. multicast from devices 

D. multicast from controller 

E. unicast from devices 

F. multicast from Prime Infrastructure 

Answer: B 


Avant-garde 300-365 practice test:

Q34. An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.) 

A. static VLAN on client 

B. ACL 

C. AP group 

D. static IP on client 

E. MAC filtering 

F. RF group 

G. AAA override 

Answer: C,G 


Q35. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

Answer: D 


Q36. A network engineer must configure a 5 GHz network to allow for the greatest density of radios possible with the least amount of co-channel interference. Which configuration best fulfills this requirement? 

A. Set 802.11 h Local Power constraint to 25 dBm. 

B. Set DCA to 20 MHz channels and enable Extended UNII-2 channels. 

C. Enable Event Driven RRM in 5 GHz with a sensitivity of High, n 

D. Configure TPC Power Threshold to -80 dBm and set interference Optimal Mode (TPCv2). 

Answer: B