Act now and download your Cisco 350-401 test today! Do not waste time for the worthless Cisco 350-401 tutorials. Download Down to date Cisco Implementing and Operating Cisco Enterprise Network Core Technologies exam with real questions and answers and begin to learn Cisco 350-401 with a classic professional.
Also have 350-401 free dumps questions for you:
NEW QUESTION 1
Refer to the exhibit.
An engineer must prevent the R6 loopback from getting into Area 2 and Area 3 from Area 0 Which action must the engineer take?
- A. Apply a fitter list inbound on R2 and R9
- B. Apply a filter list outbound on R3 and R7
- C. Apply a filter list outbound on R7 only.
- D. Apply a filter list inbound on R3 and R7
Answer: B
Explanation:
This question asks to prevent route advertised into Area 2 and Area 3 only. It does not ask to prevent route advertised into Area 0 so applying a filter list outbound on R3 and R7 would best fit the requirement.
NEW QUESTION 2
What mechanism does PIM use to forward multicast traffic?
- A. PIM sparse mode uses a pull model to deliver multicast traffic.
- B. PIM dense mode uses a pull model to deliver multicast traffic.
- C. PIM sparse mode uses receivers to register with the RP.
- D. PIM sparse mode uses a flood and prune model to deliver multicast traffic.
Answer: A
Explanation:
PIM sparse mode uses a pull model to deliver multicast traffic. This means that multicast traffic is only forwarded to routers that have explicitly requested it, using join messages. This reduces the amount of unnecessary traffic on the network and allows for efficient use of bandwidth. The source of this answer is the Cisco ENCOR v1.1 course, module 5, lesson 5.2: Implementing PIM Sparse Mode.
NEW QUESTION 3
By default, which virtual MAC address does HSRP group 14 use?
- A. 04.16.19.09.4c.0e
- B. 00:05:5e:19:0c:14
- C. 00:05:0c:07:ac:14
- D. 00:00:0c:07:ac:0e
Answer: D
NEW QUESTION 4
Which definition describes JWT in regard to REST API security?
- A. an encrypted JSON token that is used for authentication
- B. an encrypted JSON token that is used for authorization
- C. an encoded JSON token that is used to securely exchange information
- D. an encoded JSON token that is used for authentication
Answer: D
Explanation:
JWT: JSON Web Tokens are an open and standard (RFC 7519) way for you to represent your user's identity securely during a two-party interaction. That is to say, when two systems exchange data you can use a JSON Web Token to identify your user without having to send private credentials on every request.
NEW QUESTION 5
What is one difference between saltstack and ansible?
- A. SaltStack uses an API proxy agent to program Cisco boxes on agent mode, whereas Ansible uses a Telnet connection
- B. SaltStack uses the Ansible agent on the box, whereas Ansible uses a Telnet server on the box
- C. SaltStack is constructed with minion, whereas Ansible is constructed with YAML
- D. SaltStack uses SSH to interact with Cisco devices, whereas Ansible uses an event bus
Answer: C
NEW QUESTION 6
A company hires a network architect to design a new OTT wireless solution within a Cisco
SD-Access Fabric wired network. The architect wants to register access points to the WLC to centrally switch the traffic. Which AP mode must the design include?
- A. Bridge
- B. Fabric
- C. FlexConnect
- D. local
Answer: D
NEW QUESTION 7
DRAG DROP
Drag and drop the virtual components from the left onto their deceptions on the right.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 8
Refer to the exhibit.
The OSPF neighborship fails between two routers. What is the cause of this issue?
- A. The OSPF router ID is missing on this router.
- B. The OSPF process is stopped on the neighbor router.
- C. There is an MTU mismatch between the two routers.
- D. The OSPF router ID is missing on the neighbor router.
Answer: C
Explanation:
cisco_R2(config-subif)#do debug ip osp adj OSPF adjacency debugging is on
cisco_R2(config-subif)#ip mtu 1111 <<<<<<<<<<<<<<<< cisco_R2(config-subif)#
cisco_R2(config-subif)# cisco_R2(config-subif)#do clear ip ospf
!!!debug shows this: cisco_R2(config-subif)#
*Dec 23 13:02:27.164: OSPF-1 ADJ Et0/0.10: Rcv DBD from 6.6.6.6 seq 0x19FD opt 0x52
flag 0x7 len 32 mtu 1500 state EXSTART <<<<<<<<<<<<<
*Dec 23 13:02:27.164: OSPF-1 ADJ Et0/0.10: Nbr 6.6.6.6 has larger interface MTU
<<<<<<<<<
*Dec 23 13:02:27.164: OSPF-1 ADJ Et0/0.10: Rcv DBD from 6.6.6.6 seq 0x26B opt 0x52
flag 0x2 len 112 mtu 1500 state EXSTART
*Dec 23 13:02:27.164: OSPF-1 ADJ Et0/0.10: Nbr 6.6.6.6 has larger interface MTU
*Dec 23 13:02:27.395: OSPF-1 ADJ Et0/0.10: Rcv DBD from 6.6.6.6 seq 0x26B opt 0x52
flag 0x2 len 112 mtu 1500 state EXSTART
NEW QUESTION 9
An engineer must implement a configuration to allow a network administrator to connect to the console port of a router and authenticate over the network. Which command set should the engineer use?
- A. aaa new-modelaaa authentication login default enable
- B. aaa new-modelaaa authentication login console local
- C. aaa new-model aaa authentication login console group radius
- D. aaa new-modelaaa authentication enable default
Answer: B
NEW QUESTION 10
An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the must be the active HSRP router. The peer router has been configured using the default priority value. Which command set is required?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION 11
Which configuration filters out DOT1X messages in the format shown below from being sent toward Syslog server 10.15.20.33?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 12
Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)
- A. Cisco Discovery Protocol neighbour
- B. broadcasting on the local subnet
- C. DNS lookup cisco-DNA-PRIMARY.localdomain
- D. DHCP Option 43
- E. querying other APs
Answer: BD
NEW QUESTION 13
What is the output of this code?
- A. username Cisco
- B. get_credentials
- C. username
- D. CISCO
Answer: D
NEW QUESTION 14
DRAG DROP
A network engineer is adding an additional 10Gps link to an exiting 2x10Gps LACP-based LAG to augment its capacity. Network standards require a bundle interface to be taken out of service if one of its member links goes down, and the new link must be added with minimal impact to the production network. Drag and drop the tasks that the engineer must perform from the left into the sequence on the right. Not all options are used.
Solution:
Does this meet the goal?
- A. Yes
- B. Not Mastered
Answer: A
NEW QUESTION 15
When firewall capabilities are considered, which feature is found only in Cisco next- generation firewalls?
- A. malware protection
- B. stateful inspection
- C. traffic filtering
- D. active/standby high availability
Answer: A
NEW QUESTION 16
......
P.S. Easily pass 350-401 Exam with 747 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 350-401 Dumps: https://www.surepassexam.com/350-401-exam-dumps.html (747 New Questions)