The Far Out Guide To 350-601 Training

NEW QUESTION 1
An engineer must configure a Cisco MDS 9000 Series Switch for traffic analysis from the storage array. The storage array is connected to the interface fc2/1 in VSAN 10 and the traffic analyzer to fc4/2. The capture file must include ingress and egress traffic between the switch and the storage array. Also, only traffic in VSAN 10 must be captured. Which configuration set meets these requirements?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: A

NEW QUESTION 2
Refer to the exhibit.

Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

• A. Configure the interface of the DHCP server as untrusted.
• B. Configure the IP address of the DHCP server.
• C. Enable the DHCP relay agent.
• D. Verify the DHCP snooping bindings.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_0/dcnm/security/configuration/guide/sec_dcnm Text Description automatically generated

NEW QUESTION 3
Refer to the exhibit.

VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuratio https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/gu

NEW QUESTION 4
Refer to the exhibit.

Which two statements describe the routing table of the leaf switch? (Choose two.)

• A. The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in ACI.
• B. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
• C. The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in ACI.
• D. 172.16.100.0/24 is a BD subnet in ACI.
• E. 10.20.1.0/24 is a BD subnet in ACI.

Answer: CE

NEW QUESTION 5
An engineer configures a role for a new user in Cisco UCS Manager The role should allow the user to configure vHBAs, vNICs, and server port types.
Which role should be assigned to allow the engineer to complete this task?

• A. network administrator
• B. operations
• C. server-compute
• D. AAA administrator

Answer: A

NEW QUESTION 6
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?

• A. offline encryption acceleration
• B. increased network throughput
• C. GPU acceleration
• D. Increased compression efficiency

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most%20storage%20workloads.

NEW QUESTION 7
Refer to the exhibit.

What be connected to clear the HA NOT READY status?

• A. server chassis
• B. network uplinks
• C. management ports
• D. Layer 1-Layer 2 ports

Answer: A

NEW QUESTION 8
Refer to the exhibit.

An engineer must schedule the firmware upgrade of the Red1 and Red2 leaf switches. The requirement is to keep the upgrade time to the minimum, avoid any service impact, and perform the parallel upgrade Which set of scheduler attributes must be used to meet these requirements?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 9
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 10
Refer to the exhibit.

Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12. Which two commands are needed to complete the configuration? (Choose two.)

• A. UCS-A /org/service-profile/vnic/mon-src* # set direction both
• B. UCS-A /eth-traffic-mon/fabric/eth-mon-session' # create dest-interface 2 12
• C. UCS-A /org/service-profile/vnic/mon-src* # set direction receive transmit
• D. UCS-A /eth-traffic-mon/fabric/eth-mon-session # activate
• E. UCS-A /eth-traffic-mon/fabric/eth-mon-session* # create eth-mon-session/dest-interface 2 12

Answer: AB

Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/ CLI_Config_Guide_1_4_1_chapter42.html

NEW QUESTION 11
An engineer implements a Cisco UCS C-Series Server that must adhere to these security requirements:
Unencrypted communication must be disabled.
The session timeout must not exceed 15 minutes.
Unencrypted traffic must be automatically diverted.
CLI-based management must use nondefault ports.
Which configuration set meets these requirements?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: B

NEW QUESTION 12
A Cisco Nexus 7000 Series switch runs VXLAN, and interface Ethernet 7/30 is configured as a trunk port. Which command set configures the switch to act as a gateway for VLAN 50?
interface Ethernet7/30 no switchport
no shutdown
service instance 1 vni no shutdown

• A. encapsulation profile VSI_50_TO_500 default
• B. encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50bridge-domain 500member vni 50 interface Vlan500ip address 10.50.50.51/24
• C. encapsulation profile vni VSI_50_TO_500 dot1q 500 vni 50bridge-domain 500member vni 50 interface Bdi500jp address 10.50.50.51/24
• D. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50member vni 500 interface Bdi50ip address 10.50.50.51/24
• E. encapsulation profile vni VSI_50_TO_500 dot1q 50 vni 500bridge-domain 50member vni 500 interface Vlan50ip address 10.50.50.51/24

Answer: C

NEW QUESTION 13
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?

• A. The show install all impact command is not issued before the upgrade
• B. The kickstart image is installed by using the Install all kickstart image system image command
• C. Attempt to simultaneously upgrade more than three cards
• D. Change to the configuration settings or the network connections during the upgrade process

Answer: D

NEW QUESTION 15
Refer to the exhibit.

Which command needs to be added to the line starting with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?

• A. string(Cfusion-config_') + date)
• B. ('fusion-configj) + date
• C. str.ffusion-configj) + date
• D. (*fusion-config_ * date')

Answer: B

NEW QUESTION 16
......