we provide Simulation Microsoft 70 411 exam dumps vce which are the best for clearing 70 411 exam dumps test, and to get certified by Microsoft Administering Windows Server 2012. The 70 411 exam dumps Questions & Answers covers all the knowledge points of the real exam ref 70 411 exam. Crack your Microsoft 70 411 exam dumps Exam with latest dumps, guaranteed!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-411 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-411 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-411-exam-dumps.html
Q11. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
You generalize Server2.
You install the Windows Deployment Services (WDS) server role on Server1.
You need to capture an image of Server2 on Server1.
Which three actions should you perform?
To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q12. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2. Both servers have the DFS Replication role service installed.
You need to configure the DFS Replication environment to meet the following requirements:
. Increase the quota limit of the staging folder.
. Configure the staging folder cleanup process to provide the highest amount of free space possible.
Which cmdlets should you use to meet each requirement? To answer, select the appropriate options in the answer area.
Answer:
Q13. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the following role services installed:
. DirectAccess and VPN (RRAS)
. Network Policy Server
Remote users have client computers that run either Windows XP, Windows 7, or Windows 8.
You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN connections to Server1.
What should you configure on Server1?
A. A condition of a Network Policy Server (NPS) network policy
B. A constraint of a Network Policy Server (NPS) network policy
C. a condition of a Network Policy Server (NPS) connection request policy
D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
Answer: A
Explanation:
If you want to configure the Operating System condition, click Operating System, and then click Add. In Operating System Properties, click Add, and then specify the operating system settings that are required to match the policy.
The Operating System condition specifies the operating system (operating system version or service pack number), role (client or server), and architecture (x86, x64, or ia64) required for the computer configuration to match the policy.
Q14. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1.
You run ntdsutil as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can access the contents of the mounted snapshot. What should you do?
A. From the snapshot context of ntdsutil, run activate instance "NTDS".
B. From a command prompt, run dsamain.exe -dbpath c:\$snap_201204131056_volumec$\windows\ntds\ntds. dit -Idapport 389.
C. From the snapshot context of ntdsutil, run mount {79f94f82-5926-4f44-8af0-2f56d827a57d}.
D. From a command prompt, run dsamain.exe -dbpath c:\$snap_201204131056_volumec$\windows\ntds\ntds. dit -Idapport 33389.
Answer: D
Explanation:
By default, only members of the Domain Admins group and the Enterprise Admins group are allowed to view the snapshots because they contain sensitive AD DS data. If you want to access snapshot data from an old domain or forest that has been deleted, you can allow nonadministrators to access the data when you run Dsamain.exe. If you plan to view the snapshot data on a domain controller, specify ports that are different from the ports that the domain controller will use. A client starts an LDAP session by connecting to an LDAP server, called a Directory System Agent (DSA), by default on TCP port and UDP [7] port 389. The client then sends an operation request to the server, and the server sends responses in return. With some exceptions, the client does not need to wait for a response before sending the next request, and the server may send the responses in any order. All information is transmitted using Basic Encoding Rules (BER).
References:
http: //technet. microsoft. com/en-us/library/cc753609(v=ws. 10). aspx
Q15. Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named DC1 that runs Windows Server 2012 R2.
All client computers run Windows 8 Enterprise.
DC1 contains a Group Policy object (GPO) named GPO1.
You need to update the PATH variable on all of the client computers.
Which Group Policy preference should you configure?
A. Ini Files
B. Services
C. Data Sources
D. Environment
Answer: D
Explanation:
Environment Variable preference items allow you to create, update, replace, and delete user and system environment variables or semicolon-delimited segments of the PATH variable. Before you create an Environment Variable preference item, you should review the behavior of each type of action possible with this extension.
Q16. Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Dfsgui.msc
B. Dfsmgmt.msc
C. Adsiedit.msc
D. Ldp
Answer: C
Explanation:
How to perform a non-authoritative synchronization of DFSR-replicated SYSVOL (like "D2" for FRS)
. In the ADSIEDIT. MSC tool modify the following distinguished name (DN) value and attribute on each of the domain controllers that you want to make non-authoritative:
CN=SYSVOL Subscription,CN=Domain System Volume,CN=DFSR-LocalSettings,CN=<the server name>,OU=Domain Controllers,DC=<domain> msDFSR-Enabled=FALSE
. Force Active Directory replication throughout the domain.
. Run the following command from an elevated command prompt on the same servers that you set as non-authoritative:
DFSRDIAG POLLAD
. You will see Event ID 4114 in the DFSR event log indicating SYSVOL is no longer being replicated.
. On the same DN from Step 1, set:
msDFSR-Enabled=TRUE
. Force Active Directory replication throughout the domain.
. Run the following command from an elevated command prompt on the same servers that you set as non-authoritative:
DFSRDIAG POLLAD
. You will see Event ID 4614 and 4604 in the DFSR event log indicating SYSVOL has been initialized. That domain controller has now done a “D2” of SYSVOL.
Note: Active Directory Service Interfaces Editor (ADSI Edit) is a Lightweight Directory Access Protocol (LDAP) editor that you can use to manage objects and attributes in Active Directory. ADSI Edit (adsiedit. msc) provides a view of every object and attribute in an Active Directory forest. You can use ADSI Edit to query, view, and edit attributes that are not exposed through other Active Directory Microsoft Management Console (MMC) snap-ins: Active Directory Users and Computers, Active Directory Sites and Services, Active Directory Domains and Trusts, and Active Directory Schema.
Q17. You have a failover cluster that contains five nodes. All of the nodes run Windows Server 2012 R2. All of the nodes have BitLocker Drive Encryption (BitLocker) enabled.
You enable BitLocker on a Cluster Shared Volume (CSV).
You need to ensure that all of the cluster nodes can access the CSV.
Which cmdlet should you run next?
A. Unblock-Tpm
B. Add-BitLockerKeyProtector
C. Remove-BitLockerKeyProtector
D. Enable BitLockerAutoUnlock
Answer: B
Explanation:
4. Add an Active Directory Security Identifier (SID) to the CSV disk using the Cluster Name Object (CNO) The Active Directory protector is a domain security identifier (SID) based protector for protecting clustered volumes held within the Active Directory infrastructure. It can be bound to a user account, machine account or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request. For the cluster service to selfmanage BitLocker enabled disk volumes, an administrator must add the Cluster Name Object (CNO), which is the Active Directory identity associated with the Cluster Network name, as a BitLocker protector to the target disk volumes. Add-BitLockerKeyProtector <drive letter or CSV mount point> -ADAccountOrGroupProtector – ADAccountOrGroup $cno
Q18. Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. All of the DNS servers in both of the domains run Windows Server 2012 R2.
The network contains two servers named Server1 and Server2. Server1 hosts an Active Directory-integrated zone for contoso.com. Server2 hosts an Active Directory-integrated zone for fabrikam.com. Server1 and Server2 connect to each other by using a WAN link.
Client computers that connect to Server1 for name resolution cannot resolve names in fabnkam.com.
You need to configure Server1 to support the resolution of names in fabnkam.com. The solution must ensure that users in contoso.com can resolve names in fabrikam.com if the WAN link fails.
What should you do on Server1?
A. Create a stub zone.
B. Add a forwarder.
C. Create a secondary zone.
D. Create a conditional forwarder.
Answer: C
Explanation:
http: //technet. microsoft. com/en-us/library/cc771898. aspx
When a zone that this DNS server hosts is a secondary zone, this DNS server is a secondary source for information about this zone. The zone at this server must be obtained from another remote DNS server computer that also hosts the zone.
With secondary, you have ability to resolve records from the other domain even if its DNS servers are temporarily unavailable.
While secondary zones contain copies of all the resource records in the corresponding zone on the master name server, stub zones contain only three kinds of resource records:
A copy of the SOA record for the zone.
Copies of NS records for all name servers authoritative for the zone.
Copies of A records for all name servers authoritative for the zone.
References:
http: //www. windowsnetworking. com/articles-tutorials/windows-2003/DNS_Stub_Zones. html
http: //technet. microsoft. com/en-us/library/cc771898. aspx
http: //redmondmag. com/Articles/2004/01/01/The-Long-and-Short-of-Stub-Zones. aspx?Page=2
Q19. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. Both servers have the File and Storage Services server role, the DFS Namespaces role service, and the DFS Replication role service installed.
Server1 and Server2 are part of a Distributed File System (DFS) Replication group named Group1. Server1 and Server2 are separated by a low-speed WAN connection.
You need to limit the amount of bandwidth that DFS can use to replicate between Server1 and Server2.
What should you modify?
A. The referral ordering of the namespace
B. The staging quota of the replicated folder
C. The cache duration of the namespace
D. The schedule of the replication group
Answer: D
Explanation:
Scheduling allows less bandwidth the by limiting the time interval of the replication
Does DFS Replication throttle bandwidth per schedule, per server, or per connection?
If you configure bandwidth throttling when specifying the schedule, all connections for that replication group will use that setting for bandwidth throttling. Bandwidth throttling can be also set as a connection-level setting using DFS Management.
To edit the schedule and bandwidth for a specific connection, use the following steps:
In the console tree under the Replication node, select the appropriate replication group.
Click the Connections tab, right-click the connection that you want to edit, and then click Properties.
Click the Schedule tab, select Custom connection schedule and then click Edit Schedule.
Use the Edit Schedule dialog box to control when replication occurs, as well as the maximum amount of bandwidth replication can consume.
Q20. Your network contains an Active Directory domain named adatum.com. The domain contains 10 domain controllers that run Windows Server 2012 R2.
You plan to create a new Active Directory-integrated zone named contoso.com.
You need to ensure that the new zone will be replicated to only four of the domain controllers.
What should you do first?
A. Create an application directory partition.
B. Create an Active Directory connection object.
C. Create an Active Directory site link.
D. Change the zone replication scope.
Answer: A
Explanation:
Application directory partitions An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain controller that participates in the replication of a particular application directory partition hosts a replica of that partition. Only domain controllers running Windows Server 2003 can host a replica of an application directory partition.