Our pass rate is high to 98.9% and the similarity percentage between our n10 006 simulation questions study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the CompTIA n10 006 vce exam in just one try? I am currently studying for the CompTIA n10 006 study guide exam. Latest CompTIA network+ n10 006 Test exam practice questions and answers, Try CompTIA n10 006 dump Brain Dumps First.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for CompTIA N10-006 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW N10-006 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/N10-006-exam-dumps.html
Q51. When troubleshooting a network problem, browsing through the log of a switch, it is discovered that multiple frames contain errors. In which of the following layers does the problem reside? (Select TWO).
A. Layer 2
B. Layer 3
C. Layer 5
D. Transport layer
E. Data link
F. Physical layer
Answer: AE
Q52. A network technician must create a wireless link between two buildings in an office park utilizing the 802.11ac standard. The antenna chosen must have a small physical footprint and minimal weight as it will be mounted on the outside of the building. Which of the following antenna types is BEST suited for this solution?
A. Yagi
B. Omni-directional
C. Parabolic
D. Patch
Answer: A
Q53. CORRECT TEXT
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2) was replaced due to faulty hardware. The original network was installed according to a consultant's specifications and has always worked without a problem.
You, a network technician, have been tasked with evaluating the situation and resolving the issues to improve both performance and connectivity. Refer to the following diagram and perform any NECESSARY changes to the wireless and wired infrastructure by adjusting devices.
Note: Adjust the LEAST number of devices needed to fix the issue, all blue icons in the image are clickable. When you feel the simulation is complete please select the Done button.
Answer:
-Change the speed and duplex settings on AP2 only to 100 and full. -Change the mode to G on AP2 -Change the channel to 6 on AP2
Explanation:
Since we know that the network was running perfectly before replacing AP2 we should start by
looking at this new device that was used to replace the old one. Here we see that the other AP’s
have hard coded the speed and duplex settings to 100/full, while AP2 is set to auto/auto.
Also, the other AP’s have been configured to use 802.11G, while AP2 is using 802.11B.
Finally the channel that AP2 is using overlaps with AP1 which can cause problems. Channels 1, 6,
and 11 are spaced far enough apart that they don’t overlap. On a non-MIMO setup (i.e. 802.11 a,
b, or g) you should always try to use channel 1, 6, or 11. Since AP1 is using 1, and AP3 is using
11, AP2 should be using 6.
Q54. CORRECT TEXT
Alter recent changes to the pictured network, several users are unable to access the servers. Only PC1, PC2, PC3, and PC4 are clickable and will give you access to the command prompt and the adapter configuration tabs.
Instructions: Verify the settings by using the command prompt, after making any system changes. Next, restore connectivity by making the appropriate changes to the infrastructure. When you have completed these steps, select the Done button to submit.
Answer:
On PC3, change the subnet mask to 255.255.255.0. When it is set to 255.255.255.128, then the PC with a .129 address will not be on the same subnet as the default gateway which is .1 On PC4, change the default gateway to 10.0.2.1. It has been incorrectly set as 10.1.2.1.
Q55. Which of the following network devices use ACLs to prevent unauthorized access into company systems?
A. IDS
B. Firewall
C. Content filter
D. Load balancer
Answer: B
Q56. A network technician must utilize multimode fiber to uplink a new networking device. Which of the following Ethernet standards could the technician utilize? (Select TWO).
A. 1000Base-LR
B. 1000Base-SR
C. 1000Base-T
D. 10GBase-LR
E. 10GBase-SR
F. 10GBase-T
Answer: BE
Q57. A user calls the help desk and states that he was working on a spreadsheet and was unable to print it. However, his colleagues are able to print their documents to the same shared printer. Which of the following should be the FIRST question the helpdesk asks?
A. Does the printer have toner?
B. Are there any errors on the printer display?
C. Is the user able to access any network resources?
D. Is the printer powered up?
Answer: C
Q58. Which of the following is MOST likely to use an RJ-11 connector to connect a computer to an ISP using a POTS line?
A. Multilayer switch
B. Access point
C. Analog modem
D. DOCSIS modem
Answer: C
Q59. A network technician has been tasked with designing a WLAN for a small office. One of the requirements of this design is that it is capable of supporting HD video streaming to multiple devices. Which of the following would be the appropriate wireless technology for this design?
A. 802.11g
B. 802.11ac
C. 802.11b
D. 802.11a
Answer: B
Q60. A technician is installing a surveillance system for a home network. The technician is unsure which ports need to be opened to allow remote access to the system. Which of the following should the technician perform?
A. Disable the network based firewall
B. Implicit deny all traffic on network
C. Configure a VLAN on Layer 2 switch
D. Add the system to the DMZ
Answer: D