Citrix 1Y0-230 Study Guides 2021

NEW QUESTION 1
Scenario: User authentication is failing through the NetScaler. A Citrix Administrator checked the Authentication, Authorization and Auditing (AAA) policy, action and virtual server and verified that the correct configuration was in place. The administrator bypassed the NetScaler and the authentication worked.
Which NetScaler utility can the administrator use to troubleshoot the access issue?

• A. nslog file
• B. aaad.debug
• C. nscon message
• D. Dashboard

Answer: B

NEW QUESTION 2
Scenario: A Citrix Administrator needs to implement an Application Delivery Controller (ADC) solution. The administrator needs the appliance to be able to grow with the increasing demand for bandwidth and performance.
Which NetScaler platform with the administrator choose to accommodate the increasing demand for bandwidth and performance?

• A. SDX
• B. VPX
• C. MPX
• D. CPX

Answer: C

NEW QUESTION 3
Which three steps can a Citrix Administrator take to integrate an existing CERT-based authentication policy on an existing NetScaler Gateway platform? (Choose three.)

• A. Create a CERT authentication policy and bind it to the NetScaler Gateway virtual server
• B. Enable client authentication on the SSL parameters of the virtual server
• C. Bind the existing CERT authentication policy to the NetScaler Gateway virtual server
• D. Enable the two-factor option on the existing CERT authentication profile
• E. Change the client certificate to Mandatory on the SSL parameters of the virtual server

Answer: ACD

NEW QUESTION 4
Scenario: A Citrix Administrator manages an environment that has an externally accessible website. The administrator would like to provide end-to-end encryption and use features such as caching and compression on the NetScaler.
Which setting in SSL offload should the administrator configure to meet this requirement?

• A. SSL_TCP front-end, TCP back-end
• B. SSL front-end, HTTP back-end
• C. SSL_TCP front-end, SSL_TCP back-end
• D. SSL front-end, SSL back-end

Answer: C

NEW QUESTION 5
Scenario: A Citrix Administrator configured the “-denySSLReneg” Parameter using the below command on NetScaler to enhance security.
set ssl parameter –denySSLReneg <option>
Which two options can the administrator use to complete the command (Choose two.)

• A. NO
• B. NONSECURE
• C. ALL
• D. HIGHSECURE
• E. FRONTEND_CLIENT

Answer: AB

NEW QUESTION 6
Which two deployment methods does remote desktop protocol (RDP) proxy support? (Choose two.)

• A. ICA proxy
• B. Two hops
• C. Optimal Gateway
• D. CVPN

Answer: AD

NEW QUESTION 7
What are two pre-requisites for configuring SmartAccess policies on a NetScaler Gateway virtual server? (Choose two.)

• A. Universal License
• B. Pre- or Post-Endpoint Analysis configuration policy
• C. Smart card configuration policy
• D. Standard License

Answer: AB

Explanation: Make sure the Prerequisites are completed. This includes: ICA Only unchecked, Gateway Universal licenses installed, Callback URL configured at StoreFront, and Trust XML enabled on Delivery Controllers.
If you are using a Preauthentication Policy to run an Endpoint Analysis scan: References:

NEW QUESTION 8
Which three pieces of information are required for a NetScaler Unified Gateway deployment? (Choose three.)

• A. Valid SSL Certificates
• B. Secondary Authentication for the Unified Gateway
• C. Enterprise license or higher
• D. Content Switching virtual server
• E. Multiple IP addresses for User Access

Answer: ACD

NEW QUESTION 9
Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address which is NOT configured on NetScaler?

• A. Layer 3
• B. USIP
• C. Layer 2
• D. MAC-based Forwarding

Answer: C

NEW QUESTION 10
While troubleshooting an SSL issue on one of the SSL-based virtual servers, a Citrix Administrator noticed that the data captured from the TCP dump was showing in plain text.
What could be the cause of this issue?

• A. No SSL cipher suite was selected
• B. The SSL Certificate expired
• C. The selected cipher suite is obsolete
• D. Misconfiguration of the TCP profile

Answer: A

NEW QUESTION 11
Scenario: A NetScaler is configured with the following modes:
-MAC-based Forwarding
-USIP
-USNIP
-Layer 3 mode
A Citrix Administrator configured a new router and now requires some of the incoming and outgoing traffic to take different paths through the new router. However, the administrator notices that this is failing and takes a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the NetScaler.
Which mode should the administrator disable on the NetScaler to facilitate the addition of the new router and successfully route the packets?

• A. MAC-based Forwarding
• B. USIP
• C. Layer 3 mode
• D. USNIP

Answer: D

NEW QUESTION 12
Which two options would provide an end-to-end encryption data, while allowing the NetScaler to optimize the responses? (Choose two.)

• A. HTTP protocol for the virtual server
• B. SSL Bridge protocol for the virtual server
• C. HTTP protocol for the services
• D. SSL protocol for the virtual server
• E. SSL protocol for the services
• F. SSL Bridge protocol for the services

Answer: AB

NEW QUESTION 13
Scenario: A Citrix Administrator has a NetScaler SDX with four VPX instances configured. The SDX has a 10GB bandwidth license that has been configured with dedicated bandwidth of 2 GB for each instance. However, the administrator found that three instances do NOT ever reach the bandwidth limit, while one instance reaches the limit and needs 1 GB more bandwidth to accommodate increased traffic requests.
What can the administrator change on the instance that requires more bandwidth, to meet traffic requirements?

• A. Configure LA channel to increase the bandwidth
• B. Configure burst capacity of 1 GB with priority 10
• C. Purchase a SDX license to increase the bandwidth on the instances
• D. Configure burst capacity on the instance adding 1 GB of bandwidth with burst priority 0

Answer: D

NEW QUESTION 14
Scenario: A Citrix Administrator is managing a NetScaler SDX running eight NetScaler instances. The administrator first needs to upgrade the firmware on the instances. However, the administrator is concerned that it needs to be done all at once.
What upgrading flexibility does SDX provide in this scenario?

• A. The NetScaler instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.
• B. The NetScaler instances have to be upgraded at the same time.
• C. The NetScaler instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.
• D. It is NOT possible to upgrade the NetScaler instances to different firmware versions.

Answer: A

NEW QUESTION 15
Scenario: A NetScaler has two interfaces as 1/1 and 1/2 with MAC-based Forwarding enabled. Below are the specifications:
-Interface 1/1 and IP 192.168.10.10 is bound to VLAN 10.
-On Interface 1/2 VLAN 20 and VLAN 30 are tagged.
-VLAN 20 is bound to IP 192.168.20.10 and VLAN 30 is bound to 192.168.30.10 The NetScaler receives a packet for VIP 192.168.30.30 on interface 1/1.
Which interface of NetScaler will send a reply back in this environment?

• A. Interface 1/1
• B. NetScaler will drop the packet received on interface 1/1
• C. Interface 1/2
• D. Netscaler will reply on interfaces 1/1 and 1/2

Answer: D

NEW QUESTION 16
A Citrix Administrator needs to migrate a Remote Desktop Protocol (RDP) Proxy configuration based on NetScaler 11.1 to NetScaler 12.0.
Which three actions can the administrator perform to accomplish this requirement? (Choose three.)

• A. Replace an existing Unified Gateway virtual server with RDP Proxy configuration to a load-balancing virtual server with the AAA-TM server bound to it
• B. Move the existing NetScaler Gateway virtual server with RDP Proxy configuration, placing it behind a Unified Gateway virtual server
• C. Keep the existing NetScaler Gateway virtual server with RDP Proxy configuration as is, with a Platinum or Enterprise license
• D. Add a standalone NetScaler Gateway virtual server with RDP Proxy configuration to an existing Standard Edition appliance
• E. Add a NetScaler Gateway virtual server with RDP Proxy configuration to an existing Content-Switching virtual server

Answer: ABE