Examcollection n10 006 vce Questions are updated and all n10 006 simulation questions answers are verified by experts. Once you have completely prepared with our comptia n10 006 exam prep kits you will be ready for the real n10 006 vce exam without a problem. We have Most up-to-date CompTIA n10 006 study guide pdf dumps study guide. PASSED n10 006 exam First attempt! Here What I Did.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for CompTIA N10-006 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW N10-006 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/N10-006-exam-dumps.html

Q41. A company has changed ISPs for their office and ordered a new 250 Mbps symmetrical Internet connection. As a result, they have been given a new IP range. The ISP has assigned the company 

10.10.150.16 /28. The company gateway router has the following interface configuration facing the ISP: 

Interface A: 

IP address: 10.10.150.16 

Subnet mask: 255.255.255.240 

Default gateway: 10.10.150.32 

Speed: 1000 Mbps 

Duplex: Auto 

State: No Shutdown 

None of the workstations at the company are able to access the Internet. Which of the following are the reasons? (Select TWO). 

A. There is a duplex mismatch between the router and ISP. 

B. The router interface is turned off. 

C. The interface is set to the incorrect speed. 

D. The router is configured with the incorrect subnet mask. 

E. The router interface is configured with the incorrect IP address. 

F. The default gateway is configured incorrectly. 

Answer: EF 


Q42. Before logging into the company network, users are required to sign a document that is to be stored in their personnel file. This standards and policies document is usually called which of the following? 

A. SOP 

B. BEP 

C. AUP 

D. SLA 

Answer: C 


Q43. A technician is tasked with connecting a router to a DWDM. The technician connects the router to the multiplexer and confirms that there is a good signal level. However, the interface on the router will not come up. Which of the following is the MOST likely cause? 

A. The wrong wavelength was demuxed from the multiplexer. 

B. The SFP in the multiplexer is malfunctioning. 

C. There is a dirty connector on the fiber optic cable. 

D. The fiber optic cable is bent in the management tray. 

Answer: A 


Q44. A network technician is attempting to connect a new host to existing manufacturing equipment on an Ethernet network. The technician is having issues trying to establish communication between the old equipment and the new host. The technician checks the cabling for breaks and finds that the CAT3 cable in use is in perfect condition. Which of the following should the technician check to ensure the new host will connect? 

A. Confirm the new host is using 10GBaseSR due to the manufacturing environment 

B. Confirm the new host is compatible with 10BaseT Ethernet 

C. Confirm the existing 10Base2 equipment is using the proper frame type 

D. Confirm that CSMA/CD is disabled on the Ethernet network 

Answer: B 


Q45. A network technician is troubleshooting a problem at a remote site. It has been determined that the connection from router A to router B is down. The technician at the remote site re-terminates the CAT5 cable that connects the two routers as a straight through cable. The cable is then tested and is plugged into the correct interface. Which of the following would be the result of this action? 

A. The normal amount of errors and the connection problem has been resolved. 

B. The interface status will indicate that the port is administratively down. 

C. The traffic will flow, but with excessive errors. 

D. The interface status will show line protocol down. 

Answer: D 


Q46. A company wants to make sure that users are required to authenticate prior to being allowed on the network. Which of the following is the BEST way to accomplish this? 

A. 802.1x 

B. 802.1p 

C. Single sign-on 

D. Kerberos 

Answer: A 


Q47. An organization notices a large amount of malware and virus incidents at one satellite office, but hardly any at another. All users at both sites are running the same company image and receive the same group policies. Which of the following has MOST likely been implemented at the site with the fewest security issues? 

A. Consent to monitoring 

B. Business continuity measures 

C. Vulnerability scanning 

D. End-user awareness training 

Answer: D 


Q48. The RAID controller on a server failed and was replaced with a different brand. Which of the following will be needed after the server has been rebuilt and joined to the domain? 

A. Vendor documentation 

B. Recent backups 

C. Physical IP address 

D. Physical network diagram 

Answer: B 


Q49. Which of the following is the main difference between TCP and UDP? 

A. TCP data flows in two directions, while UDP data flows from server to client. 

B. The TCP header implements flags, while the UDP header does not. 

C. The TCP header implements checksum, while the UDP header does not. 

D. TCP connections can be secured by stateful firewalls, while UDP connections cannot. 

Answer: B 


Q50. Which of the following technologies is designed to keep systems uptime running in the event of a disaster? 

A. High availability 

B. Load balancing 

C. Quality of service 

D. Caching engines 

Answer: A