tshoot 300 135 pdf (1 to 10)

we provide Top Quality Cisco 300 135 tshoot pdf exam which are the best for clearing ccnp tshoot 300 135 test, and to get certified by Cisco TSHOOT Troubleshooting and Maintaining Cisco IP Networks. The ccnp 300 135 Questions & Answers covers all the knowledge points of the real ccnp tshoot 300 135 dumps exam. Crack your Cisco ccnp tshoot 300 135 Exam with latest dumps, guaranteed!

♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-135 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-135 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-135-exam-dumps.html

P.S. Top Quality 300-135 dumps are available on Google Drive, GET MORE: https://drive.google.com/open?id=1BNfdP-dYaYDxxYw2CbIPONm9qPz9JsvY

New Cisco 300-135 Exam Dumps Collection (Question 1 - Question 10)

New Questions 1

The implementation group has been using the test bed to do an IPv6 'proof-of- concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).

The fault condition is related to which technology?

A. NTP

B. IP DHCP Server

C. IPv4 OSPF Routing

D. IPv4 EIGRP Routing

E. IPv4 Route Redistribution

F. IPv6 RIP Routing

G. IPv6 OSPF Routing

H. IPV4 and IPV6 Interoperability

I. IPv4 layer 3 security

Answer: G

Explanation:

As explained earlier, the problem is with route redistribution on R4 of not redistributing RIP routes into OSPF for IPV6.

Topic 21, Ticket 16: IPv6 Routing Issue 3

Topology Overview (Actual Troubleshooting lab design is for below network design)

u2711 Client Should have IP 10.2.1.3

u2711 EIGRP 100 is running between switch DSW1 & DSW2

u2711 OSPF (Process ID 1) is running between R1, R2, R3, R4

u2711 Network of OSPF is redistributed in EIGRP

u2711 BGP 65001 is configured on R1 with Webserver cloud AS 65002

u2711 HSRP is running between DSW1 & DSW2 Switches

The company has created the test bed shown in the layer 2 and layer 3 topology exhibits. This network consists of four routers, two layer 3 switches and two layer 2 switches.

In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.

DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.

R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the ISPu2021s network. Because the companyu2021s address space is in the private range. R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside (209.65.0.0/24) network.

ASW1 and ASW2 are layer 2 switches.

NTP is enabled on all devices with 209.65.200.226 serving as the master clock source. The client workstations receive their IP address and default gateway via R4u2021s DHCP server.

The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is

running on DSW1 and DSW2.

In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.

DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.

The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.

Recently the implementation group has been using the test bed to do a u2021proof-of-conceptu2021 on several implementations. This involved changing the configuration on one or more of the devices. You will be presented with a series of trouble tickets related to issues introduced during these configurations.

Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and solution.

Each ticket has 3 sub questions that need to be answered & topology remains same. Question-1 Fault is found on which device,

Question-2 Fault condition is related to,

Question-3 What exact problem is seen & what needs to be done for solution

=====================================================================

New Questions 2

The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After several changes to the network addressing and routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).

Use the supported commands to isolate the cause of this fault and answer the following question.

What is the solution to the fault condition?

A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command.

B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command.

C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command.

D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command.

Answer: A

Explanation:

As explained earlier, the problem is with route misconfigured tunnel modes on R3. R3 is using tunnel mode ipv6, while R4 is using the default of GRE. We need to remove the u201ctunnel mode ipv6u201d command under interface Tunnel34

New Questions 3

The implementations group has been using the test bed to do a u2021proof-of-conceptu2021 that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.

Use the supported commands to isolated the cause of this fault and answer the following questions.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Answer: E

Explanation:

On DSW1, VALN ACL, Need to delete the VLAN access-map test1 whose action is to drop access-list 10; specifically 10.2.1.3

New Questions 4

Scenario:

A customer network engineer has edited their OSPF network configuration and now your customer is experiencing network issues. They have contacted you to resolve the issues and return the network to full functionality.

Connectivity from R3 to R4, R5 and R6 has been lost. How should connectivity be reestablished?

A. Configure R4 with a virtual link to 192.168.13.2

B. Change the R3 and R4 hello-interval and retransmit-interface timers to zero so the link won't go down.

C. Add an OSPF network statement for 4.4.4.4 0.0.0.0 area 1 in R3

D. Add an OSPF network statement for 192.168.34.3 0.0.0.255 area 2 in R3

E. Add an OSPF network statement for 192.168.34.0 0.0.0.255 area 1 in R3

Answer: E

Explanation:

Based on the network diagram, we know that a virtual link will need to be configured to logically connect area 2 to the back area 0. However, this is not the problem as we can see that R3 has been correctly configured to do this. It is, however, missing the network statement for the link to R4.

Here, we see that the link to R4 is using the 192.168.34.0 network, but that this network has not been added to OSPF

Based on the network diagram, this link should be added to Area 1, not Area 2.

Topic 6, Ticket 1: Switch Port Trunk

Topology Overview (Actual Troubleshooting lab design is for below network design)

u2711 Client Should have IP 10.2.1.3

u2711 EIGRP 100 is running between switch DSW1 & DSW2

u2711 OSPF (Process ID 1) is running between R1, R2, R3, R4

u2711 Network of OSPF is redistributed in EIGRP

u2711 BGP 65001 is configured on R1 with Webserver cloud AS 65002

u2711 HSRP is running between DSW1 & DSW2 Switches

The company has created the test bed shown in the layer 2 and layer 3 topology exhibits. This network consists of four routers, two layer 3 switches and two layer 2 switches.

In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.

DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.

ASW1 and ASW2 are layer 2 switches.

NTP is enabled on all devices with 209.65.200.226 serving as the master clock source. The client workstations receive their IP address and default gateway via R4u2021s DHCP server.

The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1 and DSW2.

In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.

DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.

The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the underlying IPv4 OSPF domain. Redistrution is enabled where necessary.

Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and solution.

Each ticket has 3 sub questions that need to be answered & topology remains same. Question-1 Fault is found on which device,

Question-2 Fault condition is related to,

Question-3 What exact problem is seen & what needs to be done for solution

Client is unable to ping IP 209.65.200.241

Solution

Steps need to follow as below:-

u2711 When we check on client 1 & Client 2 desktop we are not receiving DHCP address from R4

Ipconfig ----- Client will be getting 169.X.X.X

u2711 On ASW1 port Fa1/0/ 1 & Fa1/0/2 access port VLAN 10 was assigned which is using IP address 10.2.1.0/24

Sh run ------- & check for running config of int fa1/0/1 & fa1/0/2

====================================================

interface FastEthernet1/0/1switchport mode accessswitchport access vlan 10interface FastEthernet1/0/2switchport mode accessswitchport access vlan 10

====================================================

u2711 We need to check on ASW 1 trunk port the trunk Po13 & Po23 were receiving VLAN 20 & 200 but not VLAN 10 so that switch could not get DHCP IP address and was failing to reach IP address of Internet

u2711 Change required: On ASW1 below change is required for switch-to-switch connectivity..

int range portchannel13,portchannel23 switchport trunk allowed vlan none switchport trunk allowed vlan 10,200

New Questions 5

Which of the following commands will display a router's crypto map IPsec security association settings?

A. show crypto map ipsec sa

B. show crypto map

C. show crypto engine connections active

D. show ipsec crypto map

E. show crypto map sa

F. show ipsec crypto map sa

Answer: A

New Questions 6

Which of the following commands will remove all dynamic entries for a router's NAT table?

A. clear nat translations

B. clear ip nat translations*

C. clear ip nat statistics

D. clear ip nat transactions *

E. clear ip nat translations

F. clear ip nat translations all

Answer: B

New Questions 7

The implementations group has been using the test bed to do a u2021proof-of-conceptu2021. After several changes to the network addressing, routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1).

Use the supported commands to isolated the cause of this fault and answer the following questions.

On which device is the fault condition located?

A. R1

B. R2

C. R3

D. R4

E. DSW1

F. DSW2

G. ASW1

H. ASW2

Answer: B

Explanation:

R2 is missing the needed IPV6 OSPF for interface s0/0/0.23

New Questions 8

Use the supported commands to isolated the cause of this fault and answer the following questions.

What is the solution to the fault condition?

A. Disable auto summary on the EIGRP process

B. Enable EIGRP on the FastEthernet0/0 and FastEthernet0/1 interface using the no passive-interface command.

C. Change the AS number on the EIGRP routing process from 1 to 10 to much the AS number used on DSW1 and DSW2.

D. Under the EIGRP process, delete the network 10.1.4.0 0.0.0.255 command and enter the network 10.1.4.4 0.0.0.252 and 10.1.4.8 0.0.0.252 commands.

Answer: C

Explanation:

On R4, IPV4 EIGRP Routing, need to change the EIGRP AS number from 1 to 10 since DSW1 & DSW2 is configured to be in EIGRP AS number 10.

New Questions 9

Which of the following is not a characteristic of fast switching?

A. Fast switching reduces a routers CPU utilization, compared to process switching.

B. All packets of a flow, except for the first packet, use the information in the fast cache.

C. It can be enabled with the interface command ip route-cache.

D. Fast switching uses a fast cache maintained in a router's control plane.

E. The fast cache contains information about how traffic from different data flows should be forwarded.

F. Even though the fast switching is enabled, the first packet of a flow is still process switched.

Answer: D

New Questions 10

Which of the following management types can be used to deploy appropriate quality- of-service solutions to make the most efficient use of bandwidth?

A. Fault management

B. Accounting management

C. Operations management

D. Performance management

E. Security management

F. Configuration management

Answer: D

100% Renewal Cisco 300-135 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/300-135-dumps.html (New 146 Q&As)

New Cisco 300-135 Exam Dumps Collection (Question 1 - Question 10)

To see all sample questions go to: 300-135 test prep

Related 300-135 posts: